COUGAR MX660-T RGB

Download PDF
Contents

COUGAR MX660-T RGB Mid-Tower Case User Manual

Model: MX660-T RGB

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your COUGAR MX660-T RGB Mid-Tower Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

The COUGAR MX660-T RGB is a mid-tower PC case designed for advanced system builds, featuring a transparent front panel, three pre-installed ARGB VK120 fans, and a tempered glass side panel. It supports various motherboard form factors and offers extensive cooling and storage options.

2. Key Features

  • Advanced Mid-Tower Design: Features a transparent front panel with a minimalist aesthetic and a crystal clear tempered glass left panel for component visibility.
  • Integrated RGB Lighting: Includes three ARGB VK120 fans and a built-in LED controller for customizable lighting effects. Compatible with 5V ARGB motherboard synchronization.
  • VK120 ARGB Fans: Equipped with Tri-Directional RGB Circle of Light, Hydro-Dynamic-Bearing, and PWM function for durable and quiet performance.
  • Vertical GPU Support: Allows for vertical installation of graphics cards to enhance system aesthetics.
  • Modern Connectivity: Front I/O panel includes USB 3.1 Gen-2 Type-C and USB 3.0 ports for high-speed data transfer.

3. Package Contents

Please verify that all items are present in your package:

  • COUGAR MX660-T RGB Mid-Tower Case
  • 3 x ARGB VK120 Fans (pre-installed)
  • Accessory Box (screws, cable ties, etc.)
  • User Manual (this document)

4. Setup and Installation

Before starting, ensure you have a clean, static-free workspace. Refer to your motherboard and component manuals for specific installation details.

4.1. Case Overview

COUGAR MX660-T RGB Mid-Tower Case angled view

Figure 4.1: Angled view of the COUGAR MX660-T RGB case, showcasing the transparent front panel with RGB fans and tempered glass side panel.

COUGAR MX660-T RGB Mid-Tower Case front view

Figure 4.2: Front view of the COUGAR MX660-T RGB case, highlighting the three pre-installed ARGB fans behind the transparent panel.

COUGAR MX660-T RGB Mid-Tower Case top I/O panel

Figure 4.3: Top view of the COUGAR MX660-T RGB case, showing the magnetic dust filter and the front I/O panel with USB ports and power button.

4.2. Removing Side Panels

To access the interior, carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case. For the right-side metal panel, unscrew the two thumb screws and slide the panel backward.

4.3. Motherboard Installation

Install the necessary motherboard standoffs according to your motherboard's form factor (Mini ITX, Micro ATX, ATX, CEB, E-ATX). Carefully place the motherboard into the case, aligning it with the standoffs, and secure it with screws.

COUGAR MX660-T RGB Mid-Tower Case interior view

Figure 4.4: Interior view of the COUGAR MX660-T RGB case, showing the motherboard tray, drive bays, and cable management cutouts.

4.4. Storage Drive Installation

  • 3.5" Drive Bays (2): Locate the drive cage beneath the PSU shroud. Install 3.5" HDDs using the provided trays and screws.
  • 2.5" Drive Bays (5+2): SSDs can be mounted on dedicated brackets behind the motherboard tray or converted from 3.5" bays.

4.5. Graphics Card Installation

  • Horizontal Installation: Remove the necessary expansion slot covers at the rear of the case. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.
  • Vertical Installation: The case supports vertical GPU mounting. A PCIe riser cable (sold separately) is required for this configuration.

4.6. Cooling System Installation

The MX660-T RGB comes with three pre-installed ARGB VK120 fans at the front. Additional fans or liquid cooling radiators can be installed as follows:

COUGAR MX660-T RGB Mid-Tower Case cooling support diagrams

Figure 4.5: Diagrams illustrating water cooling radiator and air cooling fan support configurations for the COUGAR MX660-T RGB case.

  • Fan Support:
    • Front: 3 x 120mm (ARGB VK120 fans pre-installed) or 2 x 140mm
    • Top: 3 x 120mm or 2 x 140mm
    • Rear: 1 x 120mm
    • PSU Cover: 1 x 120mm (for HDD cooling)
  • Water Cooling Radiator Support:
    • Front: 360mm / 280mm / 240mm / 140mm / 120mm
    • Top: 360mm / 280mm / 240mm / 140mm / 120mm
    • Rear: 120mm

Note: For 360mm radiators, ensure compatibility with case dimensions and component clearance.

4.7. Front I/O Panel Connections

Connect the front panel cables (USB 3.1 Gen-2 Type-C, USB 3.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED, RGB Button) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.

5. Operation

5.1. Powering On Your System

Once all components are installed and cables are connected, press the power button located on the top I/O panel to start your computer.

5.2. RGB Lighting Control

  • Integrated RGB Button: Use the dedicated RGB button on the top I/O panel to cycle through various lighting effects and colors for the pre-installed ARGB fans.
  • Motherboard Synchronization: If your motherboard supports 5V ARGB synchronization, connect the case's ARGB cable to the motherboard's 5V ARGB header. You can then control the lighting effects using your motherboard's RGB software.

6. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your PC components.

  • Dust Filters: The case features magnetic dust filters on the top and front. Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
  • Interior Cleaning: Periodically use compressed air to remove dust buildup from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
  • Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents.

7. Troubleshooting

If you encounter issues, refer to the following common solutions:

  • System Not Powering On:
    • Check all power connections, including the PSU, motherboard 24-pin, and CPU 8-pin.
    • Ensure the front panel power switch cable is correctly connected to the motherboard header.
    • Verify the power supply unit (PSU) switch is in the "ON" position.
  • RGB Fans Not Lighting Up:
    • Confirm the ARGB cables from the fans are properly connected to the integrated controller or motherboard 5V ARGB header.
    • If using motherboard sync, ensure the motherboard's RGB software is installed and configured correctly.
    • Try cycling through effects using the case's RGB button.
  • Uneven Case Feet / Wobble:
    • Ensure the case is placed on a flat, stable surface.
    • Inspect the case feet for any damage or misalignment.
    • If a slight wobble persists, small adhesive pads can be applied to the shorter foot to level the case.

For further assistance, please contact COUGAR customer support.

8. Specifications

FeatureDetail
Product NameMX660-T RGB
Case Form FactorMid Tower
Motherboard TypeMini ITX / Micro ATX / ATX / CEB / E-ATX
Dimensions (WxHxD)213 x 495 x 474 mm (8.4 x 19.5 x 19 inches)
I/O PanelType C 3.1 x 1, USB 3.0 x 2, Mic x 1 / Audio x 1, RGB Button
3.5" Drive Bay2
2.5" Drive Bay5+2 (converted from 3.5" drive bays) / (2 SSD trays included)
Expansion Slots7+2
Cooling Fan Support (Front)120mm x 3 (ARGB VK120 fans x 3 pre-installed) / 140mm x 2
Cooling Fan Support (Top)120mm x 3 / 140mm x 2
Cooling Fan Support (Rear)120mm x 1
Cooling Fan Support (PSU Cover)120mm (for HDD Cooling)
Maximum Number of Fans8 Max.
Water Cooling Support (Front)360mm / 280mm / 240mm / 140mm / 120mm
Water Cooling Support (Top)360mm / 280mm / 240mm / 140mm / 120mm
Water Cooling Support (Rear)120mm
Onboard Lighting SystemYes
RGB Sync with M/BYes
Max. Graphics Card Length410 mm (16.1 in) (Horizontal graphics card slots are compatible with RTX 3090/3080/3070.)
Max. CPU Cooler Height165 mm (6.5 in)
Max. PSU Length200 mm (7.9 in)
MaterialMetal
ColorBlack
Item Weight6.3 Kilograms (13.86 pounds)

9. Warranty and Support

COUGAR products are designed and manufactured to the highest quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official COUGAR website.

If you require technical assistance or have questions not covered in this manual, please contact COUGAR customer support through their official website or the contact information provided in your product packaging.

COUGAR Official Website: https://cougargaming.com/

© 2023 COUGAR. All rights reserved. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.