FINGERS H527

FINGERS H527 Wired On-Ear Headphone with Microphone User Manual

Introduction

Thank you for choosing the FINGERS H527 Wired On-Ear Headphone with Microphone. This manual provides essential information for setting up, operating, and maintaining your headset to ensure optimal performance. The H527 is designed for clear communication and audio playback, featuring high-definition sound, an adjustable microphone, and a comfortable on-ear design.

Product Overview

The FINGERS H527 headset includes the following main components:

  • Adjustable Headband: For a comfortable and secure fit.
  • On-Ear Earcups: Padded for comfort during extended use.
  • Flexible Stick Microphone: Positionable for clear voice capture.
  • Audio Cable: Integrated cable with dual 3.5mm golden connectors.
  • In-line Volume Controller: For easy audio level adjustments.
FINGERS H527 wired on-ear headphone with microphone.

Image: The FINGERS H527 wired on-ear headphone, showcasing its design and components.

Close-up of the FINGERS H527 on-ear headphone earcup, showing the brand logo.

Image: A close-up view of the FINGERS H527 earcup, highlighting the brand logo and padding.

Setup Instructions

The FINGERS H527 headset is designed for simple plug-and-play connectivity with PCs and laptops.

  1. Identify Connectors: The headset features two 3.5mm golden connectors. One is for audio (typically green or with a headphone icon) and the other is for the microphone (typically pink or with a microphone icon).
  2. Connect to Device: Insert the audio connector into your computer's audio output jack and the microphone connector into your computer's microphone input jack. Ensure they are fully inserted.
  3. Adjust System Settings: After connecting, your computer should automatically detect the headset. If not, navigate to your operating system's sound settings to select the FINGERS H527 as the default playback and recording device.
FINGERS H527 headset with dual 3.5mm golden connectors for microphone and audio, designed for PC and laptop use.

Image: The FINGERS H527 headset showing its dual 3.5mm golden connectors for audio and microphone, indicating compatibility with PCs and laptops.

Operating Instructions

Wearing the Headset

  • Place the earcups over your ears.
  • Adjust the headband by sliding the earcups up or down until they fit comfortably and securely on your head.

Using the Microphone

  • Gently bend the flexible microphone boom to position the microphone approximately 1-2 inches (2.5-5 cm) from your mouth for optimal voice clarity.
  • Ensure the microphone is not obstructed.

Adjusting Volume

  • Use the in-line volume controller located on the cable to increase or decrease the audio output.
  • You can also adjust the volume through your computer's sound settings.
User wearing FINGERS H527 headset with the adjustable microphone positioned for clear communication.

Image: A person wearing the FINGERS H527 headset, demonstrating the proper positioning of the adjustable microphone for effective communication.

Maintenance

Proper care and maintenance will extend the life of your FINGERS H527 headset.

  • Cleaning: Use a soft, dry cloth to wipe the earcups and headband. Do not use harsh chemicals or abrasive cleaners.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable. Store the cable neatly when not in use to prevent tangling and damage.
  • Storage: Store the headset in a clean, dry place away from extreme temperatures and direct sunlight.

Troubleshooting

If you encounter issues with your FINGERS H527 headset, try the following solutions:

  • No Sound / Low Volume:
    • Ensure both 3.5mm connectors are fully inserted into the correct jacks on your computer.
    • Check the in-line volume controller and adjust it to an audible level.
    • Verify your computer's sound settings to ensure the headset is selected as the default playback device and the volume is not muted.
  • Microphone Not Working:
    • Confirm the microphone 3.5mm connector is securely plugged into the correct microphone input jack.
    • Check your computer's sound settings to ensure the headset microphone is selected as the default recording device and is not muted.
    • Ensure the microphone boom is positioned correctly and not obstructed.
  • Distorted Audio:
    • Reduce the volume on both the in-line controller and your computer.
    • Ensure the connectors are clean and free of debris.
    • Test the headset on another device to rule out a computer-specific issue.

Specifications

BrandFINGERS
Model NumberH527
Ear PlacementOn Ear
Form FactorOn Ear
Connectivity TechnologyWired
Headphone JackDual 3.5 mm Jack (Audio & Mic)
Driver Size27 mm
MicrophoneAdjustable Stick Mic
Control TypeCall Control, In-line Volume Remote
MaterialPlastic
Item Weight100 Grams
Box Contents1 x FINGERS H527 Headset
FINGERS H527 headset highlighting its 27mm driver, flexible stick microphone, and in-line volume controller.

Image: Visual representation of key features including the 27mm driver, flexible stick mic, and in-line volume controller.

Warranty Information

The FINGERS H527 Wired On-Ear Headphone comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects. For warranty claims or service, please retain your proof of purchase and contact the manufacturer directly.

Support

For further assistance, technical support, or inquiries, please contact the manufacturer:

  • Manufacturer: Dynamic Conglomerate Pvt. Ltd.
  • Address: 4th Floor, Simba Tower, Vishveshwar Nagar, Goregaon, Mumbai, Maharashtra 400063, India
  • Contact Number: 9137141796
  • Brand Store: FINGERS Official Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.