Maxax 2262/2W Dusk to Dawn Outdoor Wall Sconce Instruction Manual

Introduction

Thank you for choosing the Maxax 2262/2W Dusk to Dawn Outdoor Wall Sconce. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Image: Two Maxax 2262/2W outdoor wall sconces installed on a building exterior, showcasing their modern design and bubble glass.

Important Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• Consult a qualified electrician if you are unsure about the installation process.
• Use only UL/ETL listed wire connectors.
• Do not exceed the recommended wattage for the bulb (Max 40W E26).
• Ensure the fixture is properly grounded.
• Wear safety glasses and gloves during installation.

Package Contents

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.

• Outdoor Wall Sconce Fixture (2 units)
• Mounting Hardware (screws, wire nuts, mounting plate)
• Bubble Glass Shade
• Instruction Manual

Note: E26 bulb (Max 40W) is NOT included and must be purchased separately.

Product Specifications

Image: Detailed dimensions of the Maxax 2262/2W wall sconce, indicating height, width, and depth.

Installation Instructions

Before You Begin:

• Turn off power at the circuit breaker or fuse box.
• Ensure the mounting surface is clean, dry, and structurally sound.
• Gather necessary tools: screwdriver, wire strippers, electrical tape, safety glasses, gloves.

Step-by-Step Installation:

1. Prepare Wiring: Carefully pull the electrical wires from the outlet box.
2. Attach Mounting Plate: Secure the mounting plate to the outlet box using the provided screws. Ensure the plate is level and firmly attached.
3. Make Electrical Connections:
   • Connect the black wire from the fixture to the black (Live) wire from the outlet box using a wire nut.
   • Connect the white wire from the fixture to the white (Neutral) wire from the outlet box using a wire nut.
   • Connect the ground wire from the fixture to the ground wire from the outlet box (or to the green grounding screw on the mounting plate) using a wire nut.
   • Wrap all wire connections with electrical tape for added security.
4. Mount Fixture: Carefully tuck all wires into the outlet box. Align the fixture with the mounting plate and secure it with the provided screws.
5. Install Bulb: Insert an E26 base bulb (Max 40W, not included) into the socket.
6. Attach Glass Shade: Secure the bubble glass shade to the fixture according to the design.
7. Restore Power: Turn the power back on at the circuit breaker.

Image: Maxax wall sconce mounted on an exterior wall, demonstrating its placement suitability.

Operating Instructions

Dusk to Dawn Functionality:

This Maxax outdoor wall sconce is equipped with a built-in high-sensitivity photoelectric sensor, enabling automatic dusk-to-dawn operation.

• Automatic On: The light fixture will automatically turn on when the ambient light levels drop at dusk.
• Automatic Off: The light fixture will automatically turn off when sufficient natural light is detected at dawn.

Ensure the sensor is not obstructed by objects, eaves, or other light sources (like other bright lights) that could interfere with its proper function. For optimal performance, install the fixture in a location where the sensor can accurately detect natural light levels.

Image: Visual representation of the automatic dusk-to-dawn feature, showing the light off in daylight and on in darkness.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your outdoor wall sconce.

• Cleaning: To clean the fixture, ensure the power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Glass Care: The bubble glass shade can be cleaned with a mild glass cleaner. Ensure it is completely dry before restoring power.
• Bulb Replacement: Always turn off power before replacing the bulb. Allow the bulb to cool completely before touching. Replace with an E26 base bulb, not exceeding 40W.
• Inspection: Periodically check for any loose connections or signs of wear. If any damage is observed, consult a qualified electrician.

Image: Close-up of the bubble glass, showing its unique texture.

Troubleshooting

If you encounter issues with your Maxax outdoor wall sconce, refer to the following common problems and solutions:

Warranty and Customer Support

Maxax products are designed for quality and durability. For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the Maxax Store on Amazon.