Product Overview
The Belkin UltraGlass Anti-Microbial Screen Protector is designed to provide enhanced protection for your iPhone 12 or iPhone 12 Pro. It features double ion-exchange strengthened glass for durability and an anti-microbial coating to reduce bacterial growth on the screen surface. This manual provides instructions for proper installation, usage, and care.
Image: Belkin UltraGlass Screen Protector shown installed on an iPhone 12, highlighting its clear and precise fit.
Package Contents
Verify that all items are present in your package:
- 1 x Belkin ScreenForce UltraGlass Anti-Microbial Screen Protector
- 1 x Easy Align tray
- 1 x Cleaning cloth
- 1 x Dust removal sticker
Setup and Installation
Follow these steps carefully for optimal screen protector application. Ensure you are in a clean, dust-free environment.
- Clean Your Device Screen: Use the provided cleaning cloth to thoroughly wipe your iPhone screen. Ensure all smudges, fingerprints, and dirt are removed.
Image: A clean iPhone 12 screen, ready for screen protector application.
- Remove Dust: Use the dust removal sticker to gently dab the entire screen surface. This will pick up any remaining dust particles.
- Position the Easy Align Tray: Place your iPhone into the Easy Align tray. Ensure it is seated correctly and securely. The tray helps guide the screen protector for precise alignment.
Image: The Easy Align tray with the screen protector hovering above an iPhone, demonstrating the alignment process.
- Prepare the Screen Protector: While holding the screen protector by its edges, locate the black tab labeled "1". Slowly pull this tab down and away to peel off the protective film from the adhesive side. Avoid touching the adhesive surface.
- Apply the Screen Protector: Carefully align the screen protector with the Easy Align tray and your phone's screen. Once aligned, gently lower the screen protector onto the phone, starting from the top and working your way down. The Easy Align tray will ensure correct positioning.
Video: This video demonstrates the step-by-step installation process of the Belkin screen protector using the Easy Align tray, including cleaning, dust removal, and precise application.
- Remove Air Bubbles: If any small air bubbles are present, gently push them towards the edges of the screen protector using the cleaning cloth or a soft card.
- Final Removal: Once the screen protector is fully adhered and free of bubbles, carefully remove your iPhone from the Easy Align tray.
Operating Instructions
Once installed, the Belkin UltraGlass Screen Protector operates seamlessly with your iPhone 12 or 12 Pro. It is designed to maintain full touchscreen sensitivity and clarity.
- Touch Sensitivity: The screen protector is engineered to preserve the original touch response of your device.
- Clarity: Enjoy crystal-clear viewing with minimal impact on screen brightness or color accuracy.
- Anti-Microbial Protection: The integrated anti-microbial coating continuously works to reduce bacterial growth on the screen surface.
Maintenance and Care
To ensure the longevity and effectiveness of your screen protector, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth (like the one provided) to wipe the screen protector. For stubborn smudges, slightly dampen the cloth with water or an approved screen cleaner. Avoid harsh chemicals or abrasive materials.
- Avoid Sharp Objects: While the UltraGlass is highly scratch-resistant, extreme pressure or sharp objects can still cause damage.
- Storage: If removing the screen protector for any reason, store it flat and protect the adhesive side from dust and debris.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Solution |
|---|---|
| Air Bubbles After Installation | Small bubbles can often be pushed out to the edges using a soft cloth or a squeegee. For larger bubbles, gently lift the nearest edge of the protector and reapply slowly, pushing the air out as you go. Ensure the screen is free of dust before reapplication. |
| Misalignment | If the protector is significantly misaligned, carefully lift it from one corner and reposition it using the Easy Align tray as a guide. Re-clean the screen if dust has accumulated during the process. |
| Dust Under the Protector | Gently lift the corner closest to the dust particle. Use a dust removal sticker or a piece of tape to carefully lift the dust from the screen or the adhesive side of the protector. Reapply slowly. |
| Reduced Touch Sensitivity | Ensure the screen protector is fully adhered without any gaps or large air pockets. If the issue persists, check your phone's touch sensitivity settings. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Belkin |
| Model Number | OVA037zz |
| Compatible Devices | Apple iPhone 12, Apple iPhone 12 Pro |
| Material | UltraGlass |
| Item Hardness | 9H |
| Special Features | Anti-Fingerprint, Scratch Resistant, Anti-Microbial Treated |
| Finish Type | LAS Glass |
| Water Resistance Level | Water Resistant |
| Screen Size | 6.1 Inches |
| Clarity | 100% |
| Item Dimensions (L x W) | 6.88"L x 3.46"W |
| Item Weight | 0.03 Kilograms |
Warranty Information
This Belkin UltraGlass Screen Protector comes with a Limited Lifetime Warranty. For detailed terms and conditions, please refer to the official Belkin website or contact customer support.
Support
For further assistance, product registration, or to view frequently asked questions, please visit the official Belkin support website:
You can also visit the Belkin Store on Amazon for more products and information: