1. Introduction
Thank you for choosing the Crivit 4-Person Igloo Double Tent. This manual provides essential information for the safe and effective use, setup, and maintenance of your tent. Designed for comfort and durability, this tent features a dark interior for peaceful sleep, even during daylight hours, and a cooler internal temperature. Its waterproof construction ensures protection against the elements, making it ideal for various outdoor adventures.
Please read this manual thoroughly before attempting to set up or use the tent. Keep it for future reference.
2. Safety Information
- Fire Safety: Keep all flame and heat sources away from the tent fabric. The tent is made of flammable material.
- Ventilation: Ensure adequate ventilation to prevent condensation and carbon monoxide buildup if using heating or cooking appliances inside (not recommended).
- Weather Conditions: Do not set up the tent under trees during thunderstorms. In strong winds, ensure all guy lines are securely anchored.
- Site Selection: Choose a flat, dry area free of sharp objects. Avoid setting up in depressions where water might collect.
- Children: Supervise children around the tent.
3. Components List
Before setup, verify that all components are present:
- Outer Tent (Flysheet)
- Inner Tent (Sleeping Cabin)
- Fiberglass Poles (for main structure)
- Steel Pegs (16 pieces)
- Guy Lines (6 pieces)
- Carry Bag
- Assembly Instructions (this manual)
4. Setup Instructions
Follow these steps for quick and easy assembly:
- Unpack and Lay Out: Remove the tent from its carry bag and lay the outer tent flat on your chosen campsite. Ensure the entrance is facing the desired direction.
- Assemble Poles: Connect the fiberglass pole sections. The poles are designed with an interlocking system for easy assembly.
- Insert Poles: Slide the assembled poles through the fabric sleeves on the outer tent. The sleeves are sewn at one end for convenience.
- Secure Poles: Insert the ends of the poles into the grommets or pins located at the base of the tent corners. This will raise the tent structure.
- Peg Down Tent: Secure the four corners of the outer tent to the ground using the provided steel pegs.
- Attach Inner Tent: Hook or clip the inner tent to the attachment points inside the outer tent. Ensure the sleeping cabin is properly suspended.
- Tension Guy Lines: Extend and peg down the 6 guy lines to provide additional stability, especially in windy conditions. Adjust the tensioners to make the tent taut.

Image 4.1: The Crivit 4-Person Igloo Tent fully erected, showcasing its dome structure and integrated awning.

Image 4.2: The tent in use, demonstrating its capacity and suitability for family camping.
5. Operating and Usage
Maximize your comfort and convenience with these features:
- Dark Interior: The tent's dark interior fabric is designed to provide increased darkness for peaceful sleep, even during daylight hours, and helps maintain a cooler internal temperature.
- Awning: The fully rollable and weather-protected awning provides additional storage space for gear, shoes, or as a shaded area.
- Ventilation: Utilize the main entrance and dedicated ventilation opening, both equipped with mosquito nets, to ensure airflow and prevent condensation while keeping insects out.
- Internal Storage: A side interior pocket and a practical storage net in the dome provide convenient places to store small items like phones, headlamps, or books.
- Cable Pass-Through: A dedicated cable pass-through allows for easy routing of power cables into the tent for charging devices or powering lights.

Image 5.1: Inside the tent, highlighting the dark sleeping cabin and internal storage pocket.
6. Maintenance and Storage
Proper care extends the life of your tent:
- Cleaning: Clean the tent with a soft sponge and mild soap (non-detergent) and lukewarm water. Do not use harsh chemicals or washing machines. Rinse thoroughly.
- Drying: Always ensure the tent is completely dry before packing it away. Packing a damp tent can lead to mildew and fabric degradation. Air dry in a shaded, well-ventilated area.
- Storage: Store the tent in a cool, dry place, away from direct sunlight and extreme temperatures.
- Pole Care: Inspect poles for damage before and after each use. If a pole splinters, repair kits are available.
- Pegs and Guy Lines: Clean pegs and coil guy lines neatly before storage to prevent tangles.

Image 6.1: The tent compactly stored in its carry bag, ready for transport or storage.
7. Troubleshooting
- Condensation Inside Tent:
Solution: Ensure proper ventilation by opening vents and doors (if weather permits). Avoid cooking or bringing wet items inside the tent.
- Water Leaking Through Fabric:
Solution: Check for tears or punctures. Ensure all zippers are fully closed. The tent has a 3000mm water column rating, but extreme conditions or damage can lead to leaks. Consider applying a seam sealer or waterproofing spray to worn areas.
- Poles Difficult to Assemble/Disassemble:
Solution: Ensure pole sections are clean and free of debris. Apply a small amount of silicone lubricant if needed. Do not force connections.
- Tent Not Standing Taut:
Solution: Re-peg the tent, ensuring all corners are pulled tight. Adjust guy lines to apply even tension. Ensure poles are fully seated in their grommets.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 330940 |
| Brand | Crivit |
| Capacity | 4 Persons |
| Outer Tent Dimensions (L x W x H) | Approx. 220 + 80 (awning) x 250 x 130 cm |
| Sleeping Cabin Dimensions (L x W x H) | Approx. 210 x 240 x 125 cm |
| Packed Dimensions (Diameter x Length) | Approx. 17 cm x 60 cm |
| Weight | Approx. 4.8 kg |
| Outer Tent Material | 100% Polyester with Polyurethane coating |
| Inner Tent Material | 100% Polyester |
| Groundsheet Material | 100% Polyethylene (double-sided coated) |
| Poles Material | Fiberglass |
| Pegs Material | Steel |
| Water Column Rating | Approx. 3000 mm |
| Special Features | Waterproof, Dark Interior, Rollable Awning, Mosquito Net, Internal Pockets, Cable Pass-through |
9. Warranty and Support
For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Crivit website. Keep your proof of purchase for any warranty claims.
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Crivit customer support through their official channels. Contact details can typically be found on the product packaging or the manufacturer's website.