JBL JBLGO3

Download PDF
Contents

JBL Go 3 Portable Mini Bluetooth Speaker User Manual

Model: JBL Go 3 (JBLGO3BLUAM)

1. Introduction

This manual provides essential information for the safe and efficient use of your JBL Go 3 Portable Mini Bluetooth Speaker. Please read this manual thoroughly before using the product and retain it for future reference.

JBL Go 3 Portable Mini Bluetooth Speaker, front view

Figure 1: JBL Go 3 Portable Mini Bluetooth Speaker. This image shows the compact, fabric-covered speaker with the JBL logo prominently displayed on the front.

2. What's in the Box

Verify that all items are present upon unboxing:

  • 1 x JBL Go 3 Speaker
  • 1 x Type-C to Type-A Charging Cable
  • 1 x Quick Start Guide
  • 1 x Safety Instructions
  • 1 x Warranty Card

3. Setup

3.1 Charging the Speaker

Before first use, fully charge the JBL Go 3. Use the provided Type-C to Type-A charging cable.

  1. Connect the USB-C end of the cable to the charging port on the JBL Go 3.
  2. Connect the USB-A end of the cable to a compatible USB power adapter (not included).
  3. The LED indicator will show charging status. It will turn off once fully charged.

A full charge takes approximately 2.5 hours.

3.2 Powering On/Off

  • To power on: Press the Power button located on the side of the speaker. The LED indicator will light up.
  • To power off: Press and hold the Power button until the LED indicator turns off.

3.3 Bluetooth Pairing

To connect your JBL Go 3 to a Bluetooth-enabled device:

  1. Power on the JBL Go 3. It will automatically enter pairing mode if it's the first time or if no device is connected. The Bluetooth LED will flash.
  2. On your device (smartphone, tablet, etc.), go to the Bluetooth settings and enable Bluetooth.
  3. Select "JBL Go 3" from the list of available devices.
  4. Once connected, the Bluetooth LED on the speaker will stop flashing and remain solid.
  5. To pair with a new device, press the Bluetooth button on the speaker to enter pairing mode again.

4. Operating the Speaker

4.1 Music Playback

Once connected via Bluetooth, you can control music playback from your paired device.

  • Play/Pause: Use the controls on your connected device.
  • Volume Up: Press the + button on the speaker.
  • Volume Down: Press the - button on the speaker.
JBL Go 3 delivering big audio and punchy bass

Figure 2: The JBL Go 3 speaker in an outdoor setting, illustrating its capability to provide rich audio and bass.

4.2 IP67 Waterproof and Dustproof

The JBL Go 3 is rated IP67, meaning it is fully waterproof and dustproof. It can be submerged in up to 1 meter of water for up to 30 minutes.

  • Ensure the USB-C port cover is securely closed before exposing the speaker to water or dust.
  • After exposure to water, dry the speaker thoroughly before charging.
JBL Go 3 on a sandy beach, highlighting its waterproof and dustproof features

Figure 3: JBL Go 3 on a beach next to a straw hat and sunglasses, demonstrating its durability against water and dust.

4.3 Battery Life

The JBL Go 3 provides up to 5 hours of playtime on a single charge, depending on volume level and audio content.

JBL Go 3 at a picnic, indicating its long playtime

Figure 4: JBL Go 3 placed on a picnic blanket with watermelon and popsicles, symbolizing extended playtime for outdoor activities.

5. Maintenance

5.1 Cleaning

  • Wipe the speaker with a soft, damp cloth.
  • Do not use abrasive cleaners or solvents.
  • Ensure the USB-C port is dry and clean before charging.

5.2 Storage

  • Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • If storing for an extended period, charge the battery to about 50% every few months to maintain battery health.

6. Troubleshooting

If you encounter issues with your JBL Go 3, refer to the following common solutions:

ProblemPossible Solution
Speaker does not power onEnsure the battery is charged. Connect to a power source and try again.
Cannot pair via Bluetooth
  • Ensure the speaker is in pairing mode (Bluetooth LED flashing).
  • Turn off and on Bluetooth on your device.
  • Forget "JBL Go 3" from your device's Bluetooth list and try pairing again.
  • Move the speaker closer to your device.
No sound
  • Increase the volume on both the speaker and your connected device.
  • Ensure the speaker is successfully paired.
  • Try playing audio from a different application or device.
Charging issue
  • Check the charging cable and adapter for damage.
  • Ensure the charging port on the speaker is clean and dry.
  • Try a different USB power source.

For more detailed troubleshooting, please refer to the official JBL support website or the Troubleshooting Guide (PDF).

7. Specifications

FeatureDetail
BrandJBL
Model NameJBL Go 3
Model NumberJBLGO3BLUAM
Speaker Maximum Output Power4.2 watts
Frequency Response20 KHz
Connectivity TechnologyBluetooth
Bluetooth Range10 meters
Audio Output ModeStereo
Water Resistance LevelIP67 (Waterproof and Dustproof)
Battery Average Life5 hours
Battery Charge Time2.5 hours
Battery Capacity750 milliamp_hours
Power SourceBattery Powered
Item Dimensions (D x W x H)1.57"D x 3.39"W x 2.72"H
Item Weight7.36 ounces
Enclosure MaterialPolycarbonate (PC)
UPC050036374262

8. Warranty and Support

The JBL Go 3 comes with a 1-year manufacturer's warranty. Please refer to the warranty card included in the box for full terms and conditions.

For product support, frequently asked questions, or to download the full user guide, please visit the official JBL support website: www.jbl.com/support.

You can also find the User Guide (PDF) here.

© 2023 JBL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.