Invigorated Water pH ACTIVE 650ml Steel Alkaline Water Bottle Bundle
pH ACTIVE 650 ml Steel Alkaline Water Bottle + ON-THE-GO 30g 3 pk Bundle User Manual
Model: pH ACTIVE 650ml Steel Alkaline Water Bottle Bundle
Brand: Invigorated Water
Introduction
This manual provides essential information for the proper use and maintenance of your Invigorated Water pH ACTIVE 650 ml Steel Alkaline Water Bottle and ON-THE-GO 30g 3 pk Bundle. This bundle is designed to provide filtered alkaline water on the go, reducing the need for single-use plastic bottles and offering a convenient hydration solution.
The pH ACTIVE bottle is constructed from durable stainless steel and features insulation to maintain beverage temperature. The included pH ON-THE-GO filter bags are designed to increase water pH, improve taste, and add beneficial minerals.
Product Components

Image: The complete pH ACTIVE bundle, showing the stainless steel bottle, three pH ON-THE-GO filter pouches, and an additional sports lid.

Image: An exploded diagram illustrating the bottle's components: the main double-walled insulated body, the pH ON-THE-GO alkaline water filter, the stylish bamboo lid, and the bonus sports lid.
- pH ACTIVE 650 ml Steel Water Bottle: Double-walled, vacuum-insulated stainless steel bottle.
- pH ON-THE-GO 30g Filter Bags (3-pack): Multi-stage alkaline water filters.
- Bamboo Lid: Stylish and secure lid for the bottle.
- Sports Lid: Additional lid for active use.
Setup and First Use
- Unpack Components: Carefully remove all items from the packaging.
- Wash Bottle: Before first use, hand wash the stainless steel bottle and both lids with warm, soapy water. Rinse thoroughly.
- Prepare Filter:

Image: A hand demonstrating the placement of the pH ON-THE-GO filter bag into the bottle's filter compartment.
Open one pH ON-THE-GO 30g filter bag. Place the filter bag directly into the bottle. Ensure it is fully submerged when water is added.
- Fill Bottle: Fill the bottle with potable tap water.
- Secure Lid: Choose either the bamboo lid or the sports lid and screw it on tightly to prevent leaks.
- Initial Filtration: For optimal performance, allow the water to sit with the filter for at least 5-10 minutes before consuming, especially during the first use. This allows the filter media to activate and begin the filtration process.
Operating Instructions
The pH ACTIVE bottle is designed for simple, on-the-go use.
- Filling: Unscrew the lid and fill the bottle with cold tap water. Ensure the pH ON-THE-GO filter bag is inside.
- Drinking:
- With Bamboo Lid: Unscrew the lid to drink directly from the bottle.
- With Sports Lid: Flip open the spout and sip.
- Temperature Retention: The double-walled insulation keeps cold drinks cold for up to 24 hours and hot drinks hot for up to 12 hours.
- Alkaline Water Benefits: The multi-stage filter increases water pH, reduces negative oxidation-reduction potential (-ORP), and adds beneficial minerals such as zinc, magnesium, selenium, and iron.
Maintenance and Care
Proper maintenance ensures the longevity and effectiveness of your pH ACTIVE bottle and filters.
- Bottle Cleaning: Hand wash the stainless steel bottle and lids only. Do not use abrasive cleaners or scrubbers. Do not place in a dishwasher.
- Filter Replacement: Each pH ON-THE-GO 30g filter bag lasts approximately 30 days, or filters up to 300 cups (16 gallons / 72 liters) of water. Replace the filter bag when you notice a decrease in filtration effectiveness or taste, or after the recommended period.

Image: Close-up view of the multi-stage alkaline water filter media, highlighting its long-lasting capacity (1,200 cups / 80 gallons per filter) and its ability to increase pH up to 9 and remove chlorine, heavy metals, and fluoride.

Image: A comparison chart showing the filter capacity for pH On-The-Go 30g (suitable for bottles & glasses, filters up to 400 cups) and pH On-The-Go 100g (suitable for pitchers, filters up to 1300 cups).
- Storage: When not in use, empty the bottle, remove the filter, and allow all components to air dry completely before reassembling or storing. Store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water tastes unusual or not alkaline. | Filter needs activation or replacement. | Ensure filter is fully submerged for 5-10 minutes on first use. Replace filter if it has exceeded its lifespan. |
| Bottle leaks. | Lid not properly secured or seal is damaged. | Ensure lid is screwed on tightly. Check the silicone seal inside the lid for proper placement and any damage. |
| Water flow is slow (with sports lid). | Air vent or spout is blocked. | Ensure the air vent on the sports lid is clear. Clean the spout thoroughly. |
Specifications
- Brand: Invigorated Water
- Model: pH ACTIVE 650ml Steel Alkaline Water Bottle Bundle
- Capacity: 650 Milliliters (approx. 22 fl oz)
- Material: Food-grade Stainless Steel, Copper (filter media)
- Insulation: Double-walled vacuum insulation
- Filter Type: pH ON-THE-GO Multi-stage Alkaline Water Filter Bag (30g)
- Filter Lifespan: Approximately 300 cups / 16 gallons / 72 liters or 30 days per filter bag.
- Care Instructions: Hand Wash Only
- Recommended Uses: Travel, Hiking, Sports, Daily Hydration
Warranty and Support
For warranty information and customer support, please refer to the official Invigorated Water website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
Invigorated Water Contact: www.invigoratedwater.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.