Bona PowerPlus Antibacterial Surface Cleaner Spray (Unscented, 22 Fl Oz) - Instruction Manual

1. Product Overview

The Bona PowerPlus Antibacterial Surface Cleaner Spray is an unscented, ready-to-use cleaning solution designed for various hard, non-porous surfaces. This powerful formula, driven by hydrogen peroxide, effectively kills 99.9% of household germs, including cold & flu viruses, Salmonella, E.coli, and other bacteria. It is formulated to power through grease and grime without harsh chemicals, dyes, or streaks, leaving surfaces fresh and clean.

Image: Bona PowerPlus Antibacterial Surface Cleaner Spray, Unscented, 22 Fl Oz. This image displays the product bottle, highlighting its label with key features like 'PowerPlus', 'Antibacterial Surface Cleaner', 'Kills 99.9% of Household Germs', 'Powered by Hydrogen Peroxide', 'Streak-Free', 'No Harsh Chemicals', and suitable surfaces such as Granite, Stone, Ceramic Tile, Stainless Steel, Mirrors, and Glass.

2. Safety Information

• CAUTION: KEEP OUT OF REACH OF CHILDREN. Read all instructions and warnings before use.
• Avoid contact with eyes. In case of contact, rinse thoroughly with water.
• Do not ingest. If swallowed, seek medical attention immediately.
• Use in a well-ventilated area.
• This product is a non-food contact surface cleaner.
• No harsh chemicals, dyes, or strong perfumes are used in this unscented formula.

3. Setup

1. Ensure the spray nozzle is securely attached to the bottle.
2. Turn the nozzle to the 'SPRAY' or 'STREAM' position. Avoid the 'OFF' position during use.
3. The product is ready-to-use directly from the bottle; no dilution is required.

4. Operating Instructions

4.1 Recommended Surfaces

This cleaner is suitable for everyday use on sealed non-porous hard surfaces, including:

• Granite
• Stone
• Ceramic Tile
• Stainless Steel
• Glass
• Other sealed non-porous hard surfaces (e.g., kitchen appliance exteriors, sinks, countertops, shower stalls, doors).

4.2 Application Steps

1. Prepare the Surface: Remove any loose debris or large particles from the surface to be cleaned.
2. Spray: Hold the bottle upright and spray the cleaner directly onto the surface. Ensure the area is thoroughly wet.
3. Dwell Time (for Disinfection): For antibacterial action, allow the product to remain wet on the surface for 10 minutes.
4. Wipe: Wipe the surface clean with a paper towel or a clean, damp cloth. For best results and a streak-free shine, use a microfiber cloth.
5. Repeat: For heavily soiled areas, a second application may be necessary.

5. Maintenance

• Storage: Store the product in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the cap tightly closed when not in use.
• Nozzle Care: If the spray nozzle becomes clogged, remove it from the bottle and rinse it under warm water.
• Refill: This product is available in a 22 Fl Oz spray bottle and larger refill sizes for continued use.

6. Troubleshooting

• Streaks: If streaks appear, ensure you are using a clean, absorbent cloth (preferably microfiber) and wiping the surface thoroughly until dry. Over-application can also lead to streaks; use a moderate amount.
• Nozzle Clogging: If the nozzle fails to spray, check for blockages and clean as described in the Maintenance section.
• Ineffective Cleaning: For stubborn stains or heavy grime, allow the cleaner to sit on the surface for a few minutes before wiping, or apply a second time.

7. Specifications

8. Warranty and Support

Bona products typically come with a manufacturer's warranty. For specific warranty details, claims, or product support, please refer to the packaging or contact Bona customer service directly. Contact information can usually be found on the product label or the official Bona website.