Introduction
The Ring Outdoor Smart Plug allows you to control your existing outdoor lights or appliances remotely. This device features dual outlets, providing independent control over two separate connections. It integrates with your Ring ecosystem, enabling smart features and customizable settings through the Ring app.
Image: The Ring Outdoor Smart Plug, a black rectangular device with a blue indicator light, shown installed beneath a grey weatherproof outlet cover on an outdoor wall.
What's in the Box
- Ring Outdoor Smart Plug
- Outlet covers
- 6.5 inch cable (1)
- Installation hardware (1 packet)
Setup
To enable smart features such as mobile notifications and customizable settings, a Ring Bridge, Ring Alarm Pro, Echo (4th Gen), or Echo Show 10 (3rd Gen) is required. The Ring Bridge connects the Outdoor Smart Plug to your Ring app and other compatible devices.
- Physical Installation: Plug the Ring Outdoor Smart Plug into a weatherproof GFCI (Ground-Fault Circuit Interrupter) outlet. You can either hang the device or mount it to a wall, ensuring the outlets face downwards to prevent water ingress.
- Ring App Connection:
- Open the Ring app on your mobile device.
- Select "Set Up a Device" or tap the "+" icon.
- Follow the in-app instructions to scan the barcode on your device.
- The app will guide you through connecting the Smart Plug to your Ring Bridge.
Image: A smartphone screen displaying the Ring app, showing various light groups like "Front Yard" and "Back Yard" with options to turn lights on or off, demonstrating app control.
Operating the Smart Plug
The Ring Outdoor Smart Plug offers flexible control options for your connected devices.
- App Control: Use the Ring app to remotely turn on or off devices connected to the smart plug. The dual outlets, labeled 'A' and 'B', can be controlled independently or as a single unit.
- Manual Control: A button on the top face of the unit allows for manual toggling of each plug (A or B) on and off.
- Scheduling: Within the Ring app, you can set custom schedules for your connected lights or appliances to turn on and off automatically.
- Alexa Integration: The Smart Plug is compatible with Alexa-enabled devices. Once connected to your Ring Bridge and linked with Alexa, you can use voice commands to control the plug. For example, say "Alexa, turn on the lights."
Image: An Amazon Echo Dot device on a wooden table, illustrating voice control capabilities with Alexa for the smart plug.
Maintenance
To ensure optimal performance and longevity of your Ring Outdoor Smart Plug, consider the following maintenance tips:
- Regular Cleaning: Periodically wipe the exterior of the smart plug with a soft, damp cloth to remove dirt and debris. Ensure the device is unplugged before cleaning.
- Inspect Connections: Regularly check the power cord and the connections to the GFCI outlet for any signs of wear, damage, or loose fittings.
- Weather Protection: While the device is weather-resistant (IP66, IP64 in-use), ensure it remains plugged into a weatherproof GFCI outlet and that the outlets are facing downwards to minimize exposure to rain and moisture.
- Software Updates: Keep your Ring app updated to the latest version to benefit from new features, improvements, and security patches.
Troubleshooting
If you encounter issues with your Ring Outdoor Smart Plug, refer to the following common troubleshooting steps:
- Device Not Responding:
- Ensure the smart plug is securely plugged into a working GFCI outlet.
- Verify that the Ring Bridge (or compatible hub) is powered on and connected to your home network.
- Check the Ring app for the device's status. If it shows offline, try restarting the Ring Bridge.
- Connectivity Issues / Limited Range:
- The Ring Outdoor Smart Plug requires a Ring Bridge for connectivity. Ensure the smart plug is within range of your Ring Bridge.
- Note that the Smart Plug currently does not support Ring's 2nd Gen Lighting Bridge or Amazon Sidewalk for range extension. If experiencing range issues, consider relocating the Ring Bridge closer to the smart plug, if feasible.
- A single Ring Bridge can support approximately 50 Ring Smart Lighting devices. Ensure you are not exceeding this limit.
- App Control Problems:
- Ensure your Ring app is updated to the latest version.
- Check your mobile device's internet connection.
- Log out and then back into the Ring app.
Specifications
| Dimensions | 4.92 in. x 3.14 in. x 1.96 in. (125mm x 80mm x 50mm) |
| Available Color | Black |
| Features | Dual outlet support, Set schedules from the Ring app (Ring Bridge required) |
| Power Input | 120 VAC, 60Hz |
| Power Output | 120 VAC, 60Hz |
| Maximum Loads (across both outlets) | 15A; ½ HP motor load, 1875 watt (resistance) |
| Connectivity | Wireless connection to Ring Bridge |
| Operating Conditions | -4°F - 122°F (-20°C – 50°C), Weather Resistant IP66 (IP64 in-use). Plug into weatherproof GFCI outlet and hand or mount to wall with outlets facing down. |
Warranty
The Ring Outdoor Smart Plug comes with a 1-year limited warranty. For detailed terms and conditions, please refer to the warranty information provided with your product or visit the official Ring support website.
Support
For further assistance, technical support, or to access additional resources, please visit the official Ring support website or contact Ring customer service. Ensure you have your product model number (B08KSJ56WR) available when contacting support.
You can typically find support contact information on the Ring website: ring.com/support
