Hellberg 48001-001

Hellberg SAFETY Xstream LD Electronic Earmuffs User Manual

Model: 48001-001

Introduction

Thank you for choosing the Hellberg SAFETY Xstream LD Electronic Earmuffs. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new hearing protection device. Please read this manual thoroughly before using the product and retain it for future reference.

Hellberg SAFETY Xstream LD Electronic Earmuffs, front view

Figure 1: Hellberg SAFETY Xstream LD Electronic Earmuffs. These earmuffs provide robust hearing protection while allowing for Bluetooth audio streaming.

Safety Information

Always prioritize safety when using hearing protection.

  • Ensure earmuffs are properly fitted to achieve stated noise reduction.
  • Do not modify the earmuffs.
  • Clean regularly to maintain hygiene and performance.
  • This product is not waterproof. Avoid exposure to liquids.

What's in the Box

Upon opening the package, please verify that all components are present:

  • Hellberg SAFETY Xstream LD Electronic Earmuffs
  • User Manual (this document)

Setup

Charging the Earmuffs

Before first use, fully charge the earmuffs.

  1. Locate the charging port on the earmuffs.
  2. Connect the provided charging cable to the earmuffs and a suitable USB power source.
  3. The charging indicator light will illuminate. It will change color or turn off when charging is complete.

Fitting the Earmuffs

Proper fit is crucial for effective hearing protection.

  1. Extend the headband fully.
  2. Place the earcups over your ears, ensuring they completely cover your outer ears.
  3. Adjust the headband until the earmuffs fit snugly and comfortably, creating a seal around your ears.
  4. Ensure no hair or clothing interferes with the seal.
Hellberg SAFETY Xstream LD Electronic Earmuffs, side view

Figure 2: Side view of the Hellberg SAFETY Xstream LD earmuffs, showing the control panel and earcups.

Operating Instructions

Power On/Off

  • To power on: Press and hold the power button (usually the central button on the earcup) for approximately 3 seconds until an indicator light or audio prompt confirms power on.
  • To power off: Press and hold the power button for approximately 3-5 seconds until an indicator light or audio prompt confirms power off.

Bluetooth Pairing

The earmuffs can connect wirelessly to Bluetooth-enabled devices for audio streaming.

  1. Ensure the earmuffs are powered on.
  2. Activate Bluetooth on your smartphone, tablet, laptop, or other compatible device.
  3. On your device, search for available Bluetooth devices. The earmuffs should appear as "Hellberg Xstream LD" or similar.
  4. Select the earmuffs from the list to pair. A voice prompt or indicator light will confirm successful pairing.
  5. Once paired, you can stream music or other audio directly to your earmuffs.

Volume Control and Playback

Use the buttons on the earcup to control audio playback.

  • Volume Up: Press the '+' button.
  • Volume Down: Press the '-' button.
  • Play/Pause: Press the central power/multifunction button once.
  • Next Track: Double-press the '+' button.
  • Previous Track: Double-press the '-' button.
Person wearing Hellberg earmuffs while operating machinery

Figure 3: User wearing Hellberg Xstream LD earmuffs in a workshop environment, demonstrating practical application.

Person wearing Hellberg earmuffs while working on a car

Figure 4: User wearing Hellberg Xstream LD earmuffs while performing automotive maintenance, highlighting comfort and protection during tasks.

Maintenance

Cleaning

Regular cleaning helps maintain hygiene and extends the product's lifespan.

  • Wipe the earcups and headband with a soft, damp cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure the earmuffs are completely dry before storage or next use.

Storage

Store the earmuffs in a clean, dry place away from direct sunlight and extreme temperatures.

Earcup Replacement

Earcup cushions and foam inserts should be replaced periodically (e.g., every 6 months or as recommended by Hellberg) to ensure optimal hygiene and noise attenuation. Refer to Hellberg's official website or contact support for replacement parts.

Troubleshooting

ProblemPossible CauseSolution
No powerBattery drainedCharge the earmuffs fully.
Cannot pair BluetoothEarmuffs not in pairing mode; Device Bluetooth off; Too far from deviceEnsure earmuffs are on and in pairing mode. Turn device Bluetooth on. Move device closer to earmuffs.
Poor sound qualityLow battery; Interference; Poor Bluetooth connectionCharge earmuffs. Move away from other electronic devices. Re-pair Bluetooth.
Noise reduction ineffectiveImproper fit; Worn ear cushionsAdjust earmuffs for a snug fit. Consider replacing ear cushions.

Specifications

FeatureDetail
Model NameXstream LD Hearing Protection with Bluetooth for Music Streaming
Model Number7391441002481 (also 48001-001)
BrandHellberg
Connectivity TechnologyWireless, Bluetooth
Noise ControlNoise Shielding
Ear PlacementOver Ear
ColorBlack
Compatible DevicesSmartphones, Tablets, Laptops, Desktops, Bluetooth-enabled devices
Water Resistance LevelNot waterproof
Product Dimensions20.4 x 17.6 x 11.4 cm
Item Weight640 grams

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Hellberg website.

For technical support, replacement parts, or further assistance, please contact Hellberg customer service through their official website or the contact information provided in your product packaging.

Official Hellberg Store: Visit Hellberg Store on Amazon

© 2024 Hellberg. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.