Mount Plus HAB-502 Metal Storage Stand for Dyson Cordless Cleaners

1. Introduction

Thank you for choosing the Mount Plus HAB-502 Metal Storage Stand. This stand is designed to provide a stable and organized storage solution for your Dyson V6, V7, V8, V10, V11, and V15 cordless stick vacuum cleaners and their accessories. It eliminates the need for wall-mounting, offering portability and convenience.

Image: The Mount Plus HAB-502 Metal Storage Stand in a living room setting, holding a Dyson vacuum and multiple attachments.

2. Safety Information

• Read all instructions carefully before assembly and use.
• Keep small parts away from children during assembly to prevent choking hazards.
• Ensure all screws are tightened securely to maintain stability.
• Do not overload the stand with items not intended for its use.
• Place the stand on a flat, stable surface to prevent tipping.
• When moving the stand with a vacuum attached, exercise caution to avoid accidental tipping.

3. Package Contents

Please verify that all components are present before beginning assembly.

Image: All components of the Mount Plus HAB-502 stand laid out, including the base, main frame, accessory holders, and hardware.

Tools Needed (Not Included):

• Phillips Head Screwdriver

4. Assembly Instructions

Follow these steps to assemble your Mount Plus HAB-502 Metal Storage Stand.

Step 1: Attach Wheels to the Base

Secure the two wheels to the underside of the base plate using the provided screws and a Phillips head screwdriver. Ensure they are firmly attached for smooth movement.

Video: Demonstrates attaching the wheels to the base of the stand using a screwdriver.

Step 2: Connect Main Frame to Base

Align the main vertical frame with the base plate. Insert the screws and tighten them using the provided wrench to ensure a secure connection.

Video: Shows how to attach the main vertical frame to the base plate and secure it with screws and a wrench.

Step 3: Install Wooden Support and Accessory Hooks

Insert the wooden support into its designated slot on the main frame and secure it with a screw. Then, attach the accessory hooks to the side of the main frame using the smaller screws.

Video: Illustrates the installation of the wooden support and the accessory hooks onto the stand's frame.

Step 4: Mount the Dyson Charging Dock

Attach your Dyson vacuum's charging dock to the designated mounting plate on the stand. Ensure the charging cable is routed correctly and the dock is securely fastened.

Image: A close-up view of the Dyson charging dock being mounted onto the stand's backplate.

Video: Demonstrates the process of attaching the Dyson charging dock to the stand and routing its cable.

5. Operating Instructions

Moving the Stand

The stand features a sliding base with wheels for easy repositioning. Gently tilt the stand and roll it to your desired location. Ensure the vacuum is securely docked before moving.

Video: Shows how to tilt and move the stand using its sliding base and wheels.

Storing Accessories

Utilize the multiple hooks on the side of the stand to neatly store all your Dyson vacuum attachments. This keeps them organized and easily accessible.

Video: Demonstrates how to attach various Dyson vacuum accessories to the stand's hooks.

Docking the Vacuum

Once the charging dock is installed, simply place your Dyson cordless vacuum onto the dock for storage and charging. Ensure it clicks into place securely.

Video: Illustrates the proper way to dock a Dyson cordless vacuum onto the stand for storage and charging.

Image: The fully assembled Mount Plus HAB-502 stand holding a Dyson vacuum and its accessories, ready for use.

6. Maintenance

To keep your storage stand in optimal condition:

• Wipe the stand regularly with a soft, damp cloth to remove dust and dirt.
• Avoid using abrasive cleaners or solvents, as these may damage the finish.
• Periodically check all screws and connections to ensure they remain tight.

7. Troubleshooting

Issue: Stand feels unstable or wobbly.

Solution:

• Ensure all assembly screws are fully tightened.
• Verify the stand is placed on a flat, level surface.
• Confirm that the Dyson vacuum is correctly docked and balanced on the stand.

Issue: Accessories do not fit on hooks.

Solution:

• Ensure you are using compatible Dyson accessories. The stand is designed for Dyson V6, V7, V8, V10, V11, and V15 series attachments.
• Try different orientations for larger attachments.

8. Specifications

9. Warranty and Support

Mount Plus offers a 100% money-back or replacement guarantee if there is any quality problem. For further assistance, product support, or warranty claims, please contact Mount Plus customer service through the retailer where the product was purchased.

Customer satisfaction is our priority.