1. Introduction
Thank you for choosing the Briloner Leuchten Dimmable LED Ceiling Light, Model 7378-316. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge, in accordance with local wiring regulations. Always switch off the main power supply at the fuse box or circuit breaker before commencing any installation or maintenance work.
- Voltage: Ensure the power supply voltage matches the requirements specified on the product label (240 Volts).
- Handling: Handle the light fixture with care to avoid damage. Do not apply excessive force.
- Environment: This product is designed for indoor use only (IP20 rating). Do not expose it to water or high humidity.
- Heat: Do not cover the light fixture with insulating material or other objects that could impede heat dissipation.
- Light Source: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the LED panel.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation:
- 1 x Briloner Leuchten LED Ceiling Light (Model 7378-316)
- 1 x Remote Control
- Mounting Hardware (screws, wall plugs)
- Instruction Manual
4. Installation Instructions
- Preparation: Before starting, ensure the main power supply to the installation area is switched off.
- Marking: Position the mounting bracket (if separate) or the light fixture itself on the ceiling at the desired location. Mark the drilling points for the screws.
- Drilling: Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Wiring: Connect the electrical wires from the ceiling to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth) as indicated. Secure all connections.
- Mounting: Secure the light fixture to the ceiling using the provided screws. Ensure it is firmly attached.
- Power On: Once installation is complete and all connections are secure, restore power to the circuit.
Product Dimensions:
The image above illustrates the physical dimensions of the LED ceiling light, measuring 1195 mm in length, 295 mm in width, and 76 mm in height.
5. Operating Instructions
The Briloner LED Ceiling Light offers versatile lighting options controlled via the included remote control.
This image displays the remote control and its various functions, including power, dimming, color temperature adjustments, nightlight, and timer settings.
5.1 Remote Control Functions
- ON/OFF: Press the 'ON' button to turn the light on and 'OFF' to turn it off.
- Dimming: Use the 'Dim Up' and 'Dim Down' buttons to adjust the brightness continuously.
- Color Temperature Control: Adjust the light color from warm white (3000K) to neutral white to cool white (6500K) using the dedicated buttons or the 'White Change' function.
- Nightlight Function: Activate a low-intensity, warm light setting suitable for night use.
- Timer: Set a timer for the light to automatically switch off after a specified period.
The light features a memory function, retaining the last used brightness and color temperature settings when switched off and on, either via the remote or a wall switch.
This image visually confirms the key features of the light: adjustable white color temperature (3000K-6500K), dimmable functionality, and a nightlight mode.
The image demonstrates the light's ability to transition between warm white, neutral white, and cool white color temperatures, ranging from 3000K to 6500K.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the light fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check for any signs of damage to the fixture or wiring. If any damage is found, disconnect power and consult a qualified electrician.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Incorrect wiring. Remote control battery depleted. | Check circuit breaker/fuse. Verify wiring connections (consult electrician). Replace remote control batteries. |
| Remote control not working. | Batteries depleted or incorrectly inserted. Obstruction between remote and light. Remote not paired (if applicable). | Replace batteries, ensure correct polarity. Remove obstructions. Refer to remote pairing instructions (if provided separately). |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose wiring connection. | Consult an electrician to check power supply stability. Check wiring connections (with power off, consult electrician). |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Briloner |
| Model Number | 7378-316 |
| Product Dimensions (L x W x H) | 119.5 x 29.5 x 7.6 cm |
| Weight | 3.94 Kilograms |
| Material | Plastic (Shade: Metal) |
| Color | White |
| Style | Modern, Rectangular |
| Power Source | AC (Alternating Current) |
| Voltage | 240 Volts |
| Wattage | 38 Watts |
| Luminous Flux | 3800 Lumens |
| Light Type | Integrated LED |
| Color Temperature | 3000K (Warm White) to 6500K (Cool White) |
| Special Features | Dimmable, Color Temperature Control, Remote Control Included |
| Average Lifespan | 25,000 Hours |
| IP Rating | IP20 (Indoor Use Only) |
| Energy Efficiency Class | F |
9. Warranty and Support
For warranty information and customer support, please refer to the retailer or manufacturer's official website. Information regarding spare parts availability is not provided in this manual.
