CLOUDY BAY CBST003WH3C-6PK

Download PDF
Contents

CLOUDY BAY Dimmable Upgraded 3 Color 120V LED Indoor Outdoor Step Lights User Manual

Model: CBST003WH3C-6PK

Introduction

This manual provides comprehensive instructions for the safe installation, optimal operation, and proper maintenance of your CLOUDY BAY Dimmable Upgraded 3 Color 120V LED Indoor Outdoor Step Lights. Please read this manual thoroughly before proceeding with installation and retain it for future reference. Adherence to these guidelines will ensure the longevity and performance of your product.

Six CLOUDY BAY Dimmable LED Step Lights in white, showing a gradient of warm to cool light, indicating adjustable color temperature.

Image: Six CLOUDY BAY Dimmable LED Step Lights. These lights feature an adjustable color temperature, ranging from warm white to cool white, suitable for various indoor and outdoor applications.

Safety Information

To prevent electric shock, fire, or personal injury, always follow these safety precautions:

  • WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
  • All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
  • This product is designed for 120V AC power supply. Do not attempt to connect to other voltage sources.
  • Ensure all wiring is securely connected and insulated to prevent short circuits.
  • Do not install on surfaces that are unstable or prone to vibration.
  • Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
  • The LED chips are integrated and not replaceable.

Product Features

The CLOUDY BAY Dimmable LED Step Lights offer advanced features for versatile lighting solutions:

  • Selectable Color Temperature (CCT): Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) to match your desired ambiance. The CCT must be set using a toggle switch on the fixture prior to installation.
  • Optimized Light Projection: Designed to project light downwards, illuminating each step without causing direct glare, enhancing safety and comfort.
  • Sleek and Ultra-Thin Design: The white finish face plate (2-7/8" height, 4-3/4" length) blends seamlessly with walls, providing a minimalist aesthetic.
  • Indoor and Outdoor Application: Constructed for durability, these lights are suitable for both indoor and outdoor use, including stairways, pathways, driveways, and patios.
  • Energy Efficient LED: Each light consumes only 3W of power, producing 100 lumens of brightness, ensuring low energy consumption and a long operational lifespan.
  • Dimmable Functionality: Compatible with most standard dimmers, allowing for adjustable brightness from 10% to 100%.
  • Weather Resistant: Engineered to withstand various environmental conditions, including heat, storms, water, and frost, with an operating temperature range of -4°F to 104°F.
  • Durable Construction: Features an aluminum body and an Acrylonitrile Butadiene Styrene shade for robust performance.
Diagram showing the components of the CLOUDY BAY step light, including Sand White finish, Aluminum Body, Integrated LED, and Ultra-Thin Design.

Image: Product Information. This diagram illustrates the key components and design elements of the step light, highlighting its sand white finish, aluminum body, integrated LED, and ultra-thin profile.

Comparison of CLOUDY BAY's downward light projection versus another brand's outward projection for step lights.

Image: Illumination Zone Comparison. This graphic demonstrates how CLOUDY BAY step lights project light downwards to illuminate treads without glare, contrasting with other brands that project light outwards.

Specifications

AttributeValue
BrandCLOUDY BAY
Model NumberCBST003WH3C-6PK
ColorWhite (3000K/4000K/5000K selectable)
MaterialAluminum (Body), Acrylonitrile Butadiene Styrene (Shade)
StyleModern
Light Fixture FormWall
Room TypeStairway
Product Dimensions4.6"L x 2.8"W x 1.5"H
Specific Uses For ProductIndoor & Outdoor Use
Power SourceCorded Electric
Installation TypeWall Mount
Special FeatureDimmable
Control MethodToggle Switch (for CCT selection)
Light Source TypeLED (Integrated)
Voltage120 Volts
Wattage3 watts
Brightness100 Lumen
Water Resistance LevelWater Resistant
Operating Temperature-4°F ~ 104°F
Included ComponentsMounting Hardware, Rubber Gasket
CertificationETL Listed
Detailed product dimensions of the CLOUDY BAY step light and its internal components, along with included mounting hardware.

Image: Product Dimensions and Included Hardware. This image provides precise measurements of the step light and illustrates the short screws, long screws, wire nuts, and mounting bracket supplied for installation.

Installation Guide

These step lights are designed for easy installation into a standard gang box (screw holes 3-1/4" apart). Ensure power is disconnected before beginning installation.

  1. Prepare the Junction Box: Ensure the electrical junction box is properly installed and secured in the desired location.
  2. Fix the Mounting Bracket: Secure the provided mounting bracket to the junction box using the appropriate screws.
  3. Make Wiring Connections: Connect the step light's wires to the 120V power supply wires using the provided wire nuts. Ensure proper polarity (Live to Live, Neutral to Neutral, Ground to Ground).
  4. Set Color Temperature (CCT): Before fully inserting the light, locate the CCT toggle switch on the back of the fixture. Select your desired color temperature (3000K, 4000K, or 5000K).
  5. Insert Wiring and Push Light Body: Carefully tuck all wiring into the junction box. Then, push the light body firmly into the mounting bracket until it sits flush with the wall.
  6. Seal for Wet Locations (Optional but Recommended): For outdoor or wet location usage, it is suggested to apply caulking to seal the upper two-thirds between the light fixture and the mounting surface after installation. This enhances water seal performance.
Four-step visual guide for installing the CLOUDY BAY step light, showing fixing the bracket, wiring, inserting connections, and pushing the light body.

Image: Installation Guide. This visual guide illustrates the four main steps for installing the step light: fixing the mounting bracket, making wire connections, inserting wiring into the junction box, and pushing the light body into place.

Operating Instructions

Once installed, operating your CLOUDY BAY LED Step Lights is straightforward:

  • Power On/Off: Control the lights using your standard wall switch connected to the 120V power supply.
  • Color Temperature Selection: The desired color temperature (3000K, 4000K, or 5000K) must be selected using the CCT toggle switch located on the back of the fixture before installation. This setting cannot be changed after the light is fully installed without removing it.
  • Dimming Function: If connected to a compatible dimmer switch, you can adjust the brightness of the step lights from 10% to 100%. Ensure your dimmer is suitable for LED fixtures.
Image showing the CCT toggle switch on the back of the step light and examples of 3000K, 4000K, and 5000K light outputs.

Image: 3 CCT Selectable. This image displays the CCT toggle switch for selecting between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures, along with visual representations of each light output.

Graphic illustrating smooth dimming capability from 10% to 100% brightness, with examples of compatible dimmer switches.

Image: Smooth Dimming. This graphic demonstrates the dimming range from 10% to 100% brightness and shows examples of compatible CLOUDY BAY dimmer series switches (CBLD001WH, CBLD003WHA, CBLD001A, CBLD006WH).

Table listing various dimmer models compatible with CLOUDY BAY step lights, including brand, model, description, and dimming range.

Image: Dimmer List. This table provides a list of compatible dimmer models from various brands, along with their specifications and dimming ranges, for use with CLOUDY BAY step lights.

Maintenance

The CLOUDY BAY LED Step Lights require minimal maintenance:

  • Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
  • Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician or contact customer support.
  • LED Longevity: The integrated LED chips are designed for a long lifespan and do not require replacement.

Troubleshooting

If you encounter issues with your CLOUDY BAY LED Step Lights, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn onNo power supply
Loose wiring connection
Faulty switch
Check circuit breaker and wall switch. Ensure power is on.
Verify all wiring connections are secure (ensure power is off before checking).
Test the switch with another device or replace if faulty.
Light flickers or dims inconsistentlyIncompatible dimmer switch
Loose wiring
Voltage fluctuations
Ensure the dimmer switch is compatible with LED fixtures. Refer to the dimmer list in the operating instructions.
Check all wiring connections for tightness (power off).
Consult an electrician to check for stable voltage supply.
Incorrect color temperatureCCT switch set incorrectlyThe CCT switch must be set before installation. If the light is already installed, disconnect power, carefully remove the fixture, adjust the CCT toggle switch on the back, and reinstall.
Water ingress (for outdoor use)Inadequate sealingEnsure proper caulking was applied around the fixture during installation, especially for outdoor or wet locations. Reapply sealant if necessary.

Warranty & Support

Warranty: CLOUDY BAY Lighting offers a 5-year warranty on this product, based on 3-5 hours of everyday use. This warranty covers defects in materials and workmanship under normal use.

Support: If you have any questions, require technical assistance, or need to claim warranty service, please contact CLOUDY BAY customer support. Please have your model number (CBST003WH3C-6PK) and proof of purchase ready when contacting support.

For further assistance, please visit the official CLOUDY BAY website or contact their customer service department.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.