4DRC Mini Drone 4D-V8 User Manual

1. Introduction

Thank you for purchasing the 4DRC Mini Drone 4D-V8. This compact and versatile quadcopter is designed for beginners and kids, offering both remote control and hand-operated modes for an engaging flight experience. Please read this manual thoroughly before operation to ensure safe and proper use.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• This product is intended for users aged 14 years and above.
• Always read all instructions carefully before operation.
• Do not put the toy in the mouth due to the danger of choking from small parts.
• Operate the drone in open spaces, avoiding fire, high-dropping buildings, and other drones.
• Ensure a safe distance from other drones and obstacles during play.

2. What's in the Box

The package includes the following components:

• 1 x 4DRC Mini Drone (4D-V8)
• 1 x Remote Control
• 3 x Drone Batteries
• 1 x USB Charging Cable
• Spare Propellers (quantity may vary)
• User Manual (this document)

Image: Contents of the 4DRC Mini Drone package, including the drone, remote, batteries, and case.

3. Setup

3.1 Charging the Batteries

The drone comes with 3 modular batteries. Ensure all batteries are fully charged before first use.

1. Connect the USB charging cable to a USB power adapter (not included) or a computer USB port.
2. Connect the battery to the charging cable.
3. The indicator light on the USB cable will show charging status (refer to cable's specific light behavior).
4. Charging typically takes approximately 60 minutes per battery.

A fully charged battery provides approximately 8-10 minutes of flight time, though advertised flight time is 20-27 minutes for all three batteries combined. Actual flight time may vary based on usage and conditions.

Image: The three modular batteries and the USB charging cable for the drone.

3.2 Installing Batteries

Drone Battery Installation:

• Insert a fully charged modular battery into the battery compartment on the drone until it clicks into place.

Remote Control Battery Installation:

• Open the battery cover on the back of the remote control.
• Insert 3 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
• Close the battery cover.

3.3 Pairing and Calibration

1. Place the drone on a flat, level surface.
2. Turn on the drone's power switch. The drone's lights will flash.
3. Turn on the remote control. The remote's indicator light will flash.
4. Push the left joystick (throttle) all the way up, then all the way down. The drone's lights will stop flashing, indicating successful pairing.
5. To calibrate the gyroscope, push both joysticks down and to the right simultaneously. The drone's lights will flash rapidly and then become solid, indicating successful calibration.

4. Operating Instructions

4.1 Basic Controls (Remote Control Mode)

• One-Key Take-off/Landing: Press the one-key take-off button (usually indicated by an arrow pointing up) to automatically take off and hover at a certain height. Press it again to land.
• Throttle (Left Joystick): Push up to ascend, pull down to descend.
• Direction (Right Joystick): Push forward to fly forward, pull back to fly backward. Push left to fly left, push right to fly right.
• Trimming: If the drone drifts, use the trim buttons on the remote to adjust its stability.

Image: The drone in flight, demonstrating its auto obstacle avoidance feature while being controlled by the remote.

Image: Illustrations showing the drone's auto-hover, hand control, and one-key landing capabilities.

4.2 Hand-Operated Mode (Induction Mode)

The drone can be controlled by hand gestures thanks to its built-in sensors.

1. Throwing GO: Gently toss the drone upwards to initiate flight.
2. Altitude Control: Use your hand below the drone to make it ascend. Move your hand away to make it descend.
3. Obstacle Avoidance: The drone has 5 sensors (front, back, left, right, bottom) to sense and avoid obstacles.
4. Auto-Rotating/Circle Fly: Specific hand gestures can trigger these modes (refer to remote control instructions for precise gestures if applicable).
5. Rollover Stop: Grab the drone gently to stop the propellers.

Image: Visual guide for hand-operated control, including steps for launching and controlling the drone with gestures, alongside altitude hold and circle flight features.

4.3 Special Flight Modes

• Altitude Hold: The drone will automatically maintain its current altitude, making it easier to control.
• Headless Mode: In Headless Mode, the drone's orientation is relative to the pilot, regardless of the drone's actual "front" or "back." This simplifies control for beginners. Activate/deactivate using the dedicated button on the remote.
• 3D Flip: Press the 3D Flip button on the remote and then push the right joystick in any direction to perform a 360-degree flip.
• Speed Modes: The drone offers 3 speed modes (low, medium, high) to suit different skill levels. Use the speed button on the remote to cycle through them.

Image: The drone demonstrating Headless Mode, where its flight direction is relative to the controller's position.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone and remote control. Do not use water or chemical cleaners.
• Propeller Replacement: If propellers are damaged, replace them with the spare propellers provided. Ensure the correct propeller (A or B) is installed on the corresponding motor.
• Battery Care:
  • Do not overcharge or over-discharge batteries.
  • Store batteries in a cool, dry place away from direct sunlight and heat.
  • If not used for a long period, charge batteries to about 50% before storage.
• Storage: Store the drone and its components in the provided carrying case to protect them from dust and damage.

Image: The drone's dimensions (13cm x 11cm x 4cm) are shown, highlighting its compact size.

6. Troubleshooting

7. Specifications

• Brand: 4DRC
• Model: 4D-V8
• Product Dimensions: 13 x 11 x 3.99 cm
• Item Weight: 180 g
• Batteries: 3 x C batteries (included for drone, AAA for remote not included)
• Control Method: Remote Control, Hand-operated control, Gesture control
• Special Features: Altitude Hold, Headless Mode, 3D Flip, 3 Speed Modes, Throwing GO, Modular Battery Design
• Skill Level: Beginner

8. Warranty and Support

For warranty information and technical support, please refer to the contact details provided on the product packaging or the official 4DRC website. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may also contact the seller through the platform where the product was purchased.