[UL Listed] OMNIHIL 15 Feet Long AC Power Cord

Introduction

This manual provides essential information for the safe and effective use of your OMNIHIL 15 Feet Long AC Power Cord. This power cord is designed to provide reliable power to compatible devices, such as the Ridgeway QS-2715BR. Please read this manual thoroughly before use and retain it for future reference.

Image: The OMNIHIL 15-foot AC power cord, shown coiled, featuring a standard two-prong male plug on one end and a two-slot female connector on the other.

Safety Information

Always observe the following safety precautions to prevent injury or damage to your equipment:

• Ensure the power cord is compatible with your device's power requirements before connecting.
• Do not use the cord if it is damaged, frayed, or has exposed wires.
• Avoid placing the cord in high-traffic areas where it could be tripped over or damaged.
• Do not overload electrical outlets.
• Keep the cord away from water, excessive heat, and direct sunlight.
• This product is UL Listed, indicating it meets nationally recognized safety standards.

Setup

Connecting your OMNIHIL AC Power Cord is a straightforward process:

1. Identify the power input port on your device (e.g., Ridgeway QS-2715BR). This port typically has two small, round holes.
2. Take the female end of the OMNIHIL power cord (the end with two holes) and align it with the device's power input port. Gently push it in until it is securely seated.


Image: Close-up of the two-slot female connector end of the power cord, designed to connect to the device.

3. Locate a standard wall electrical outlet (Type B, two-prong).
4. Take the male end of the OMNIHIL power cord (the end with two flat prongs) and insert it firmly into the wall outlet.

Image: Close-up of the two-prong male plug end of the power cord, designed for insertion into a standard wall outlet.
5. Ensure both connections are snug to prevent intermittent power supply.

Operating

Once the OMNIHIL AC Power Cord is securely connected to both your device and a power outlet, your device should receive power. Operation is automatic; the cord simply facilitates the electrical connection. Ensure your device's power switch is in the 'ON' position if applicable.

Maintenance

To ensure the longevity and safe operation of your power cord:

• Regularly inspect the cord for any signs of wear, cuts, or damage. Discontinue use immediately if damage is found.
• Clean the cord periodically with a dry, soft cloth. Do not use liquid cleaners.
• When unplugging, always grasp the plug itself, not the cord, to avoid damaging the internal wiring.
• Store the cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cord sharply.

Troubleshooting

If your device is not receiving power after connecting the OMNIHIL AC Power Cord, consider the following:

• No Power:
  • Ensure both ends of the power cord are fully and securely plugged into the device and the wall outlet.
  • Check if the wall outlet is functional by plugging in another known working device.
  • Verify that the device's power switch is in the 'ON' position.
  • Inspect the power cord for any visible damage. If damaged, replace the cord.
• Intermittent Power:
  • Ensure connections are tight and not loose.
  • Avoid bending or stressing the cord near the connectors.

If issues persist, contact OMNIHIL customer support for assistance.

Specifications

Warranty

OMNIHIL stands behind the quality of its products. This AC Power Cord comes with a:

• 5 YEAR FREE REPLACEMENT WARRANTY

For warranty claims or inquiries, please refer to the support section below.

Image: A circular badge indicating a "5 YEAR WARRANTY" for the product.

Support

For further assistance, technical support, or warranty claims, please visit the official OMNIHIL store or contact their customer service:

Visit the OMNIHIL Store on Amazon