Humax HD FOX DVB-S/S2 PVR Ready Digital Satellite Receiver Instruction Manual

1. Introduction

This manual provides essential information for the setup, operation, and maintenance of your Humax HD FOX DVB-S/S2 PVR Ready Digital Satellite Receiver. Designed for high-definition satellite television, this receiver delivers a sharp 1080p picture quality. Its compact design and 12V power compatibility make it suitable for various environments, including home use and camping.

2. Safety Information

Please read all safety instructions carefully before using the device.

• Ensure the power supply matches the device's requirements (12V).
• Do not expose the receiver to rain or moisture.
• Avoid blocking ventilation openings to prevent overheating.
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Keep the device away from direct sunlight and heat sources.

3. Package Contents

Verify that all items listed below are included in your package:

• Humax HD FOX Digital Satellite Receiver
• Remote Control
• HDMI Cable (approx. 1.5 meters)
• User Manual (this document)
• Power Adapter (12V)

Image: Humax HD FOX receiver, remote control, and HDMI cable included in the package.

4. Product Overview

4.1 Front Panel

Image: Front view of the Humax HD FOX receiver, showing the display, control buttons, and USB port.

• Power Button: Turns the receiver on or off.
• CH- / CH+ Buttons: Changes channels.
• LED Display: Shows channel number or time.
• USB 2.0 Port: For connecting external storage devices for PVR functions.

4.2 Rear Panel

Image: Rear view of the Humax HD FOX receiver, highlighting the LNB IN, HDMI, Optical, SCART, and 12V DC ports.

• LNB IN: Connects to your satellite dish.
• HDMI Output: Connects to your TV for high-definition video and audio.
• Optical Audio Output (S/PDIF): For digital audio connection to an amplifier or sound system.
• SCART Output: Connects to older TVs or VCRs.
• 12V DC Input: Connects to the included power adapter.

5. Setup

1. Connect Satellite Cable: Connect the LNB cable from your satellite dish to the "LNB IN" port on the rear panel of the receiver.
2. Connect to TV:
   • For High Definition: Connect one end of the supplied HDMI cable to the "HDMI OUT" port on the receiver and the other end to an available HDMI input on your television.
   • For Standard Definition (older TVs): Connect a SCART cable (not included) from the "SCART" port on the receiver to the SCART input on your television.
3. Connect Power: Connect the 12V power adapter to the "12V DC IN" port on the receiver, then plug the adapter into a power outlet.
4. Initial Setup: Turn on your TV and select the correct HDMI or SCART input. The receiver should power on automatically or can be turned on using the power button on the front panel or remote control. Follow the on-screen instructions for the initial setup, which typically includes language selection, country, and channel scanning. The receiver comes with pre-programmed Astra channels for immediate use.
5. PVR Setup (Optional): To use the PVR function, connect a USB storage device (e.g., USB hard drive, not included) to the USB 2.0 port on the front panel. The receiver will prompt you to format the device if necessary.

Image: Humax HD FOX receiver positioned below a television, illustrating a typical setup.

6. Operating Instructions

6.1 Remote Control Functions

Image: Detailed view of the Humax HD FOX remote control, showing various buttons for navigation and control.

• Power (Red Button): Turns the receiver on/off.
• Numeric Buttons (0-9): Directly select channels.
• CH+/CH-: Changes channels sequentially.
• VOL+/VOL-: Adjusts volume.
• MENU: Accesses the main menu for settings and features.
• OK: Confirms selections or displays channel list.
• Arrow Buttons: Navigate through menus and lists.
• EPG: Displays the Electronic Program Guide.
• INFO: Shows current program information.
• REC (Red Circle): Starts recording the current program (with USB storage connected).
• PLAY/PAUSE/STOP/FF/REW: Controls media playback (for PVR recordings).
• USB: Accesses content on the connected USB device.

6.2 Basic Operation

• Watching TV: Turn on the receiver and your TV. Use the numeric buttons or CH+/CH- to select a channel.
• Accessing Menus: Press the MENU button to access settings, channel management, and other features. Use the arrow buttons to navigate and OK to select.
• Using EPG: Press the EPG button to view program schedules. You can set reminders or schedule recordings from here.
• PVR Functions: With a USB storage device connected, you can record live TV by pressing the REC button. To play back recordings or media files, press the USB button and navigate to your desired content.

7. Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the receiver. Do not use liquid or aerosol cleaners.
• Software Updates: Periodically check the Humax website or the receiver's menu for available software updates to ensure optimal performance and access to new features. Follow the on-screen instructions carefully during updates.
• Ventilation: Ensure the receiver has adequate ventilation. Do not place it in an enclosed cabinet without airflow or stack other electronic devices on top of it.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Humax website. You can also contact Humax customer service for assistance with any issues not covered in this manual.