1. Introduction
Osmo Intensive Cleaner Clear 8019 is a specialized concentrate designed for thorough cleaning of wooden surfaces previously treated with oils and waxes. It serves as an effective alternative to sanding for rejuvenation. This cleaner is also suitable for use on various waterproof surfaces, including plastics and stainless steel.
2. Safety Information
Always read the label and product information before use. Keep out of reach of children. Avoid contact with eyes and skin. In case of contact, rinse immediately with plenty of water. Wear appropriate protective gloves and eye/face protection during application. Ensure adequate ventilation during and after use. Do not ingest. If swallowed, seek medical advice immediately and show this container or label.
Dispose of contents/container in accordance with local regulations. Contains alkaline substances. May cause irritation.
3. Product Overview
The Osmo Intensive Cleaner Clear 8019 is a highly effective, lightly alkaline cleaning agent. It is formulated to remove both organic and inorganic dirt and stains from interior and exterior surfaces. Its concentrated nature allows for powerful cleaning without the need for abrasive methods like sanding, making it ideal for preparing oiled and waxed surfaces for re-finishing.
Image: Osmo Intensive Cleaner Clear 8019 in a 1-liter bottle. The bottle features the Osmo logo and product name, indicating its use for intensive cleaning.
4. Setup and Preparation
- Ensure the surface to be cleaned is free of loose dirt and dust. Vacuum or sweep thoroughly.
- Protect adjacent surfaces not intended for cleaning, such as walls or furniture, with appropriate coverings.
- Wear protective gloves and eye protection.
- Shake the Osmo Intensive Cleaner bottle well before use.
- Dilute the cleaner according to the severity of the dirt. For light cleaning, a 1:10 dilution with water is recommended. For intensive cleaning, a 1:1 dilution or even undiluted application may be necessary for stubborn stains.
5. Operating Instructions
Application on Oiled/Waxed Wooden Surfaces:
- Apply the diluted or undiluted cleaner evenly onto the surface using a brush, mop, or Osmo Floor Brush.
- Allow the cleaner to work for approximately 15-30 minutes. For very stubborn dirt, extend the working time but do not allow the cleaner to dry on the surface.
- Scrub the surface with a stiff brush or a scrubbing machine to loosen the dirt.
- Remove the dissolved dirt and cleaner residue thoroughly using a clean, damp cloth or a wet vacuum cleaner. Rinse the cloth/machine frequently with clean water.
- Rinse the entire surface with clean water to neutralize any remaining cleaner.
- Allow the surface to dry completely before applying any new finish (e.g., Osmo Polyx-Oil).
Application on Other Waterproof Surfaces (Plastics, Stainless Steel):
- Apply the diluted cleaner onto the surface.
- Allow to work for a few minutes.
- Wipe clean with a damp cloth.
- Rinse thoroughly with clean water.
6. Maintenance and Storage
- Store the Osmo Intensive Cleaner in a cool, dry, and frost-free place. Keep the container tightly closed.
- Ensure the product is stored out of direct sunlight.
- Proper storage ensures the product's shelf life and effectiveness.
- For regular cleaning of treated surfaces after intensive cleaning, use Osmo Wash and Care or Osmo Spray-Cleaner.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dirt not fully removed | Insufficient working time or dilution. | Increase working time, use a stronger dilution (e.g., 1:1), or apply undiluted for stubborn areas. Ensure thorough scrubbing. |
| Surface feels sticky after cleaning | Cleaner residue not fully rinsed off. | Rinse the surface thoroughly with clean water multiple times until no residue remains. Ensure cloths are clean. |
| Surface appears dull or uneven | Surface not completely dry before re-oiling, or cleaner not fully removed. | Ensure the surface is completely dry before applying any new finish. Re-rinse if residue is suspected. |
8. Specifications
- Product Name: Osmo Intensive Cleaner Clear
- Model Number: 8019 (Part Number: 15101050)
- Item Volume: 1 Liter (33.81 Fl Oz)
- Item Form: Liquid Concentrate
- Special Features: Concentrated, lightly alkaline
- Usage: For oiled/waxed wooden floors and furniture, plastics, stainless steel, and other waterproof surfaces.
- Manufacturer: Osmo
- Item Weight: Approximately 2.53 pounds
- Package Dimensions: Approximately 7.28 x 5.59 x 2.8 inches
9. Warranty and Support
For specific warranty information regarding Osmo products, please refer to the official Osmo website or contact your authorized Osmo dealer. Product performance is subject to correct application and adherence to instructions.
For technical support, product inquiries, or safety data sheets, please visit the Osmo Store on Amazon or the official Osmo website.