1. Introduction
Thank you for choosing the S-link IP-217W 10000mAh Wireless Power Bank. This portable battery charger is designed to provide convenient power for your mobile devices, featuring both wired (dual USB ports) and wireless charging capabilities, along with a digital display for battery status.
Please read this manual carefully before using the product to ensure safe and optimal performance. Keep this manual for future reference.
2. Product Overview
The S-link IP-217W power bank is equipped with a 10000mAh Lithium-Polymer battery, offering reliable power on the go. It features two USB output ports, a wireless charging pad, and a digital display to show the remaining battery percentage.

Figure 1: S-link IP-217W Power Bank in use, demonstrating wireless charging with a smartphone. The power bank features a sleek black design with visible USB ports on the side.
Key Components:
- Wireless Charging Pad: Located on the top surface for compatible devices.
- USB Output Ports (x2): For wired charging of devices.
- Digital Display: Shows battery percentage and charging status.
- Power Button: Activates the display and initiates wireless charging.
- Input Port (Micro USB/Type-C): For recharging the power bank.

Figure 2: The S-link IP-217W Power Bank shown in its retail packaging, highlighting its 10000mAh capacity, wireless charging feature, and dual USB/Type-C/Micro USB connectivity.
3. Setup
Before first use, it is recommended to fully charge your S-link IP-217W Power Bank.
- Connect the power bank to a USB wall adapter (not included) using a compatible Micro USB or USB-C cable.
- The digital display will show the charging progress, indicating the battery percentage increasing.
- Once the display shows "100%", the power bank is fully charged and ready for use. Disconnect it from the power source.
4. Operating Instructions
4.1 Charging Devices via USB Cable
- Connect one end of your device's USB charging cable to one of the power bank's USB output ports.
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device. The digital display will illuminate to show the remaining battery percentage.
- To stop charging, simply disconnect your device.
4.2 Charging Devices Wirelessly
Ensure your device supports Qi wireless charging.
- Press the power button on the power bank to activate the wireless charging function. The digital display will light up.
- Place your Qi-compatible device directly onto the wireless charging pad on the top surface of the power bank.
- Ensure the device is centered on the charging pad for optimal contact. The power bank's display may indicate wireless charging activity, and your device should show that it is charging.
- If charging does not start, adjust the position of your device on the pad. Some phone cases may interfere with wireless charging; try removing the case if you encounter issues.
- To stop charging, simply remove your device from the charging pad.
4.3 Recharging the Power Bank
When the digital display shows a low battery percentage, it's time to recharge the power bank.
- Connect a Micro USB or USB-C cable to the corresponding input port on the power bank.
- Connect the other end of the cable to a USB wall adapter (5V/2A recommended) or a computer's USB port.
- The digital display will show the battery percentage increasing as it charges.
- Once the display shows "100%", the power bank is fully charged. Disconnect the cable.
5. Maintenance
- Keep the power bank dry. Do not expose it to moisture or liquids.
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping or subjecting the power bank to strong impacts.
- If the power bank will not be used for an extended period, charge it to approximately 50-70% every three months to maintain battery health.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Power bank not charging device. |
|
| Wireless charging not working. |
|
| Power bank not recharging. |
|
| Digital display not working. |
|
7. Specifications
| Model Number: | IP-217W (33198) |
| Brand: | S-link |
| Battery Capacity: | 10000 mAh |
| Battery Cell Composition: | Lithium-Polymer |
| Connector Type: | USB (Output), Micro USB / USB-C (Input) |
| Number of Output Ports: | 2 (USB) |
| Output Current: | 5 Ampere (Total) |
| Special Features: | Digital Display, Wireless Charging |
| Color: | Black |
| Power Source: | Battery Operated |
| Compatible Phone Models: | All (Universal USB, Qi-compatible for wireless) |
| Manufacturer: | S-link |
| Package Dimensions: | 19.1 x 9.3 x 3.2 cm |
| Item Weight: | 260 g |
8. Safety Information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the power bank or other property.
- Do not disassemble, open, crush, bend, deform, puncture, or shred the power bank.
- Do not modify or remanufacture the power bank, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids.
- Do not expose the power bank to fire, explosion, or other hazards.
- Avoid dropping the power bank. If dropped, especially on a hard surface, and you suspect damage, do not use it.
- Keep the power bank away from children.
- Use only chargers and cables recommended by the manufacturer.
- Do not use the power bank in environments with extreme temperatures (below 0°C / 32°F or above 45°C / 113°F).
- Dispose of the power bank according to local regulations. Do not dispose of it with household waste.
9. Warranty and Support
S-link products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official S-link website. Please retain your proof of purchase for any warranty claims.
For further assistance, you may contact S-link customer service through their official channels.