Technaxx TX-156
Technaxx TX-156 Solar Security Camera User Manual
Model: TX-156 | Brand: Technaxx
Introduction
The Technaxx TX-156 is a solar-powered outdoor security camera designed for reliable surveillance with integrated motion detection and LED lighting. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your TX-156 camera to ensure optimal performance and longevity.
Package Contents
Please verify that all items listed below are included in your package:
- 1x Technaxx TX-156 Full HD Solar Outdoor Camera with LED Light
- 1x MicroUSB Cable
- 1x Mounting Belt
- 2x Screws with Anchors
- 1x User Manual (this document)
Figure 1: Technaxx TX-156 camera with its complete set of accessories, including the MicroUSB cable, mounting belt, and hardware for installation.
Product Overview
Familiarize yourself with the main components of your Technaxx TX-156 camera:
Figure 2: Front view of the TX-156 camera, highlighting the integrated solar panel at the top, the central camera lens, the PIR motion sensor below the lens, and two high-power LED lights on either side.
- Solar Panel: Located on top, continuously recharges the internal batteries.
- Camera Lens: 1/4" CMOS 2MP sensor with F/NO 2.0 and 120° Field of View (FOV).
- PIR Motion Sensor: Detects movement within a 120° angle up to 8 meters.
- LED Lights: Two high-power LED lights for illumination, triggered by motion detection.
- Micro SD Card Slot: For local storage of recordings (supports up to 512GB, card not included).
- MicroUSB Port: For initial charging or data transfer.
Setup and Installation
1. Initial Charging
Before first use, it is recommended to fully charge the camera's internal batteries using the provided MicroUSB cable. Connect the cable to the camera's MicroUSB port and a standard USB power adapter (not included). The charging indicator (if present) will show the charging status.
2. Inserting the Micro SD Card
The camera requires a Micro SD card (up to 512GB, not included) for storing video and photo recordings. Locate the Micro SD card slot, typically protected by a rubber cover. Gently insert the Micro SD card with the contacts facing down until it clicks into place.
Figure 3: Detail of the Micro SD card slot, showing how to correctly insert the memory card for recording.
Note: The camera may require the Micro SD card to be formatted before use. If recordings are not saving, try formatting the card using a computer or the camera's configuration tool if available.
3. Mounting the Camera
The TX-156 offers versatile mounting options:
- Using the Mounting Belt: Thread the provided mounting belt through the slots on the back of the camera. Secure the camera to a tree, pole, or similar structure by tightening the belt.
- Using Screws and Anchors: For wall mounting, use the two provided screws and anchors. Mark the desired drilling spots, drill holes, insert anchors, and then screw the camera into place using the mounting points on the back.
Figure 4: Rear view of the camera demonstrating the attachment points for the mounting belt.
Figure 5: The TX-156 camera securely mounted to a tree trunk using the adjustable mounting belt.
Figure 6: The back of the camera, illustrating the four designated screw mounting points for fixed installations.
Figure 7: The TX-156 camera installed on an exterior wall, positioned to receive maximum sunlight for continuous charging.
Optimal Placement:
- Position the camera where the solar panel receives direct sunlight for several hours daily to ensure continuous battery charging.
- Ensure the camera's field of view covers the desired surveillance area and the PIR sensor is unobstructed.
- Mount the camera at a height that allows for effective motion detection and clear image capture, typically 2-3 meters (6-10 feet) above ground.
Figure 8: A detailed view of the solar panel, emphasizing its design for efficient energy absorption.
Operation
1. Powering On/Off
The camera typically powers on automatically once charged and a Micro SD card is inserted. There may be a power switch near the Micro SD card slot. Refer to the specific markings on your device for the exact location and operation of the power switch.
2. Motion Detection and Recording
The TX-156 is equipped with a PIR (Passive Infrared) motion sensor. When motion is detected within its 120° range and up to 8 meters, the camera will automatically trigger a recording.
- Video Recording: By default, video recordings are 10 seconds long. These are saved to the Micro SD card.
- Photo Capture: The camera can also capture still images upon motion detection.
- LED Light Activation: The high-power LED lights will activate when motion is detected, providing illumination for night recordings.
3. Data Retrieval
To access recorded videos and photos:
- Carefully remove the Micro SD card from the camera.
- Insert the Micro SD card into a compatible card reader connected to a computer.
- Browse the files on the Micro SD card to view or transfer your recordings.
Maintenance
- Cleaning: Periodically wipe the solar panel, camera lens, and LED lights with a soft, damp cloth to remove dust, dirt, or debris that may obstruct performance. Do not use harsh chemicals.
- Battery Care: While the solar panel provides continuous charging, ensure the camera is placed in an area with sufficient sunlight. If the camera is stored for extended periods, ensure it is fully charged before storage and recharged every few months to maintain battery health.
- Firmware Updates: Check the Technaxx official website for any available firmware updates for your TX-156 model. Follow the instructions provided by the manufacturer for any update procedures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not recording. | Micro SD card full, not inserted correctly, or not formatted. | Check Micro SD card insertion. Format the card (backup data first). Replace with a new card if corrupted. |
| Poor video/photo quality. | Dirty lens, insufficient light, or camera too far from subject. | Clean the camera lens. Ensure adequate lighting or reposition the camera closer to the subject. |
| Battery not holding charge / Camera powers off frequently. | Insufficient sunlight for solar panel, or battery degradation. | Relocate camera to an area with more direct sunlight. Ensure solar panel is clean. If issues persist, internal batteries may need service (contact Technaxx support). |
| Motion detection not working. | PIR sensor obstructed, or subject is outside detection range/angle. | Ensure PIR sensor is clean and unobstructed. Adjust camera angle or position to cover the desired area. |
| Cannot connect wirelessly (if applicable). | Connectivity issues (e.g., Wi-Fi signal, device settings). | While the product description states "Sans Fil" (Wireless), it does not specify Wi-Fi. If your model has Wi-Fi, ensure it's within range of your router and check network settings. Perform a device reset if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | TX-156 (4903) |
| Image Sensor | 1/4" CMOS 2MP |
| Lens | F/NO 2.0; FOV=120°; Auto IR Filter |
| Video Resolution | Full HD 1920 x 1080p |
| Video Duration | Default 10 seconds (adjustable) |
| PIR Detection Angle | 120° |
| PIR Detection Range | Up to 8 meters (open areas) |
| PIR Trigger Time | 0.2 - 0.25 seconds |
| Night Vision Range | 8 meters |
| Power Source | Solar-powered; 2x 18650-2P Li-Ion batteries (4000mAh 3.7V each, integrated) |
| Battery Life | Approx. 2 weeks (depending on usage, settings, temperature) |
| Storage | Micro SD card (up to 512GB, not included) |
| Operating Temperature | 10°C to +40°C |
| Material | ABS Plastic |
| Dimensions (L x W x H) | 24 x 9 x 16 cm (9.4 x 3.5 x 6.3 inches) |
| Weight | 590 grams (1.3 lbs) |
| Weather Resistance | IP5 (Robust and weather-resistant) |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Technaxx website. Keep your proof of purchase for any warranty claims.
Manufacturer: Technaxx
Country of Origin: China
Related documentsTX-156
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.