1. Introduction
Thank you for choosing the Licorne Tool Organizer Tackle Box Storage Hardware Compartment. This compact and versatile storage solution is designed to help you organize small hardware, components, and tools efficiently. Its durable polypropylene construction and patented clip mechanism ensure secure storage and easy integration with other compatible Licorne storage units.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new tool organizer. Please read it thoroughly before use to ensure optimal performance and longevity of the product.
2. Setup
Upon receiving your Licorne Tool Organizer, please follow these steps for initial setup:
- Unpacking: Carefully remove the tool organizer from its packaging. Inspect the unit for any signs of damage during transit. If any damage is observed, please contact the seller immediately.
- Initial Cleaning: Wipe the exterior and interior surfaces with a soft, damp cloth to remove any dust or manufacturing residue. Ensure the unit is completely dry before storing items.
- Divider Installation (Optional): This compartment is divider compatible. If you have purchased optional dividers, insert them into the designated slots within the compartment to create smaller sections as needed for your specific items.
Figure 2.1: A single Licorne Tool Organizer compartment. This image shows the compact size and clear construction, allowing for easy visibility of contents. The yellow clip mechanism is visible on the lid.
3. Operating Instructions
The Licorne Tool Organizer is designed for ease of use and secure storage.
- Opening and Closing: To open the compartment, gently lift the yellow clip mechanism on the lid. To close, align the lid with the base and press down firmly until the clip engages with an audible click, ensuring a secure seal.
- Storing Items: Place your small hardware, fasteners, or tools inside the compartment. Utilize optional dividers to separate different types of items for better organization.
- Using the Patented Clip Mechanism: The integrated US Patented clip mechanism allows for secure attachment of multiple Licorne compartments. Align the clips of one compartment with the corresponding slots on another, then press firmly until they interlock. This enables you to create a customized, stackable storage system.
- Water Resistance: The organizer features a water-resistant design, providing protection against splashes and light moisture. While it offers good resistance, it is not designed for submersion.
Figure 3.1: Multiple Licorne Tool Organizer compartments in use. This image demonstrates how different sizes of compartments can be stacked and connected using the patented clip mechanism, providing a modular storage solution for various items like screws, bolts, and small hand tools.
Figure 3.2: Close-up view of the Licorne Tool Organizer compartments. This image clearly shows the yellow patented clip mechanisms on the lids, which are crucial for securely connecting multiple units together. The transparent design allows for quick identification of contents.
4. Maintenance
Proper maintenance will extend the life of your Licorne Tool Organizer:
- Cleaning: Clean the organizer regularly with a mild soap and water solution. Use a soft cloth or sponge. Avoid abrasive cleaners or harsh chemicals, as they may damage the polypropylene material. Rinse thoroughly and dry completely before re-use or storage.
- Storage: Store the organizer in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the clips and hinges for any signs of wear or damage.
5. Troubleshooting
If you encounter any issues with your Licorne Tool Organizer, refer to the following common problems and solutions:
- Lid does not close securely:
- Ensure no items are obstructing the lid's closure or the clip mechanism.
- Check if the lid is properly aligned with the base before pressing down.
- Compartments do not clip together:
- Verify that you are using compatible Licorne compartments.
- Ensure the clips and corresponding slots are clean and free of debris.
- Align the clips precisely before applying firm, even pressure.
If the problem persists after attempting these solutions, please contact the manufacturer or seller for further assistance.
6. Specifications
| Feature | Description |
|---|---|
| Model Number | B08KH187XC |
| Dimensions (L x W x H) | 3.31" x 2.125" x 2.25" |
| Material | Polypropylene |
| Water Resistance Level | Water Resistant |
| Maximum Weight Recommendation | 50 Pounds |
| Clip Mechanism | US Patented clip mechanism for secure stacking |
| Divider Compatibility | Yes (dividers sold separately) |
| Manufacturer | Ennovatools |
| UPC | 600074839850 |
7. Warranty Information
This product is manufactured by Ennovatools. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Standard warranty policies typically cover manufacturing defects for a limited period from the date of purchase.
8. Customer Support
Should you require further assistance, have questions about your Licorne Tool Organizer, or need to report an issue, please contact the seller or manufacturer. When contacting support, please have your product model number (B08KH187XC) and purchase details readily available.
Manufacturer: Ennovatools
