Introduction
The Ejoyous 946BP LCD Touch Screen Separator Machine is designed for professional and DIY mobile phone repair. This device efficiently separates broken glass lenses and touch screens from LCD panels. By using this machine, you can replace only the damaged glass screen if the LCD remains functional, avoiding the need to replace the entire display assembly. Its compact design, integrated suction pump, and precise temperature control make it an essential tool for screen repair.
Key features include:
- Easy separation of glass from LCD.
- Built-in super suction pump for firm screen holding with low noise.
- High-quality aluminum alloy heating plate for efficient and uniform thermal distribution.
- Compact size, ideal for various workspaces.
- Fast heating with adjustable temperature control (60-120°C).
- Suitable for 7-inch mobile phone screens.
Product Overview
Setup Instructions
Follow these steps to set up your LCD Touch Screen Separator Machine:
- Unpacking: Carefully remove all components from the packaging. Verify that all items listed in the package contents (machine, separation wire, handles) are present.
- Placement: Place the machine on a stable, flat, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
- Power Connection: Connect the power cord to the machine's power input. This unit requires a 110V power supply with a US plug. Ensure your power outlet matches these specifications.
- Initial Inspection: Before first use, inspect the heating plate for any debris or damage. Ensure the silicone pad is properly seated.
Operating Instructions
This section outlines the general procedure for separating LCD and glass components:
- Power On: Flip the 'POWER SWITCH' to the 'ON' position. The machine will begin to warm up.
- Set Temperature: Use the temperature control knob to set the desired heating temperature. The adjustable range is 60°C to 120°C. For most mobile phone screens, a temperature between 80°C and 100°C is recommended, but specific models may vary. Allow the machine to reach the set temperature, indicated by the display.
- Place Screen: Carefully place the mobile phone screen (LCD side down) onto the heating plate. Ensure it is centered and flat. The effective heating area is 130 x 200 mm, suitable for screens up to 7 inches.
- Activate Suction: Flip the 'SUCTION SWITCH' to the 'ON' position. The built-in vacuum pump will activate, securely holding the screen in place on the heating plate.
- Heat Screen: Allow the screen to heat for a few minutes. The heat softens the adhesive bonding the glass to the LCD, making separation easier.
- Prepare Separation Wire: Thread the separation wire through the provided handles. Ensure you have a firm grip on both ends of the wire.
- Separate Glass: Once the screen is sufficiently heated, carefully slide the separation wire between the glass and the LCD. Move the wire slowly and steadily from one end to the other, ensuring not to damage the LCD or flex cables.
- Power Off: After separation, turn off the 'SUCTION SWITCH' and then the 'POWER SWITCH'. Allow the machine to cool down before cleaning or storing.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your separator machine:
- Cleaning the Heating Plate: After each use, once the machine has cooled down, gently wipe the heating plate with a soft, dry cloth to remove any adhesive residue or dust. Do not use abrasive cleaners or solvents.
- Silicone Pad: Periodically check the silicone pad for wear or damage. A damaged pad can affect suction and heat transfer. Replace if necessary.
- Suction Pump: Ensure the suction holes on the heating plate are clear of debris. Blockages can reduce suction efficiency.
- Storage: Store the machine in a dry, dust-free environment when not in use.
Troubleshooting
This section addresses common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on. | No power supply; Power switch off; Faulty power cord. | Ensure the power cord is securely plugged into both the machine and a working 110V US outlet. Check the power switch is in the 'ON' position. Try a different power outlet. |
| Screen not heating. | Temperature set too low; Heating element issue. | Increase the temperature setting. Allow sufficient time for the plate to heat up. If the issue persists, contact customer support. |
| Suction pump not holding screen firmly. | Suction holes blocked; Silicone pad damaged; Screen not flat on plate. | Clean any debris from the suction holes on the heating plate. Inspect the silicone pad for tears or wear and replace if necessary. Ensure the screen is placed flat and centered on the heating surface. |
| Difficulty separating glass. | Insufficient heating time/temperature; Incorrect wire technique. | Increase heating time or temperature slightly. Ensure the separation wire is thin and strong. Practice the separation technique with a steady, even motion. |
| Machine is not compatible with local voltage. | Product is designed for 110V US plug. | This machine is designed for 110V power systems with a US plug. If your region uses a different voltage (e.g., 220V) or plug type, a suitable voltage converter and/or plug adapter will be required. Using the machine with an incompatible power supply can cause damage and void the warranty. |
Specifications
| Feature | Specification |
|---|---|
| Model | 946BP (Product ID: Ejoyousidfwx8g496) |
| Power Supply Voltage | 110V |
| Plug Type | US Plug |
| Maximum Power | 550W |
| Current | 5 A |
| Temperature Control Range | 60°C ~ 120°C |
| Material | Metal |
| Effective Heating Size | 130 x 200 mm (7-inch screen compatible) |
| Constant Temperature Stability | ± 1.5°C |
| Product Dimensions (L x W x H) | 21.2 x 16.2 x 5.5 cm (approx. 8.35 x 6.38 x 2.16 inches) |
| Product Weight | 1.77 kg (approx. 3.9 lbs) |
| Package Dimensions | 27.4 x 23.8 x 14.8 cm |
Warranty and Support
Specific warranty details and direct support contact information are not available in the provided product data. For warranty claims, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Ejoyous website. You may also contact the seller directly through the platform where the product was purchased.