CLP Metz Bar Stool Set (2) - Velvet, Pink, Natural Frame Instruction Manual

1. Introduction

Thank you for choosing the CLP Metz Bar Stool Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Information

• Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.
• Ensure all screws and fasteners are securely tightened before using the bar stools. Periodically check and re-tighten if necessary.
• Do not exceed the maximum recommended weight capacity of 120 kg (264 lbs) per stool.
• Avoid standing on the bar stools. They are designed for seating only.
• Use the bar stools on a flat, stable surface to prevent tipping.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 2x Upholstered Seat Shells (Velvet, Pink)
• 8x Wooden Legs (Natural Oak)
• 4x Metal Footrests
• Hardware Pack (screws, washers, Allen key)
• Instruction Manual

4. Assembly Instructions

Assembly is required for this product. Please follow these steps carefully.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs to Seat Shell: Each seat shell has mounting points for four wooden legs. Align each leg with its corresponding mounting point and secure it using the provided screws and washers. Do not fully tighten the screws yet.
3. Install Footrests: The metal footrests provide stability and comfort. Attach the footrests between the wooden legs, ensuring they are properly aligned and level. Secure them with the remaining screws.
4. Final Tightening: Once all legs and footrests are in place, carefully place the stool upright on a flat surface. Apply gentle pressure to the seat to ensure all components are settled, then fully tighten all screws. Do not overtighten.
5. Repeat for Second Stool: Follow the same steps to assemble the second bar stool.

Image 1: Front view of an assembled CLP Metz bar stool, showcasing the pink velvet seat and natural oak frame with a black metal footrest.

Image 2: Side view of an assembled CLP Metz bar stool, highlighting the ergonomic curve of the seat and backrest, the natural oak legs, and the metal footrest.

5. Operating Instructions

The CLP Metz bar stools are designed for comfortable seating at elevated surfaces such as kitchen islands or bar counters.

• Seating: Sit centrally on the seat for optimal balance and comfort. The upholstered seat and backrest provide support for extended periods.
• Footrest: Utilize the metal footrest for added comfort and to maintain proper posture.
• Floor Protection: The legs are equipped with floor protectors to prevent scratches on your flooring. These allow the stools to be moved smoothly without causing damage.

6. Maintenance and Care

Proper care will help maintain the appearance and longevity of your bar stools.

• Upholstery (Velvet):
  • For light dirt, gently wipe with a damp cotton cloth. Avoid excessive moisture.
  • Vacuum surfaces regularly with a suitable upholstery attachment to remove dust and debris.
  • Do not use harsh household cleaning agents, abrasive cleaners, or chemical solvents, as these can damage the velvet fabric.
  • Spot clean spills immediately with a clean, dry cloth, blotting gently.
• Wooden Frame:
  • Wipe the wooden legs with a soft, dry cloth to remove dust.
  • For stubborn marks, use a slightly damp cloth and dry immediately.
  • Avoid direct sunlight and extreme temperature changes to prevent wood warping or fading.
• Metal Footrests: Wipe with a damp cloth and dry thoroughly.

7. Troubleshooting

If you encounter any issues with your bar stools, please refer to the following common solutions:

• Stool feels wobbly: Check all screws and fasteners to ensure they are securely tightened. Ensure the stool is on a flat, even surface.
• Scratches on floor: Verify that the floor protectors are intact and properly attached to the bottom of each leg.
• Difficulty with assembly: Review the assembly instructions carefully. Ensure all parts are correctly oriented before tightening screws. Do not force components together.

If problems persist, please contact CLP customer support for assistance.

8. Specifications

Image 3: A pair of CLP Metz bar stools, showing their elegant design and the combination of pink velvet upholstery and natural oak wood.

9. Warranty and Support

CLP products are manufactured to high-quality standards. For information regarding warranty coverage or to obtain support, please refer to the retailer's terms of sale or contact CLP customer service directly. Please have your purchase receipt and product model number (Metz, 312813) available when contacting support.