MFSTUDIO 7-Piece Expandable Metal Patio Dining Set with Swivel Chairs Instruction Manual

Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Adult assembly is required.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the weight capacity of the chairs (350 lbs per chair) or table.
• Place the furniture on a flat, stable surface.
• Avoid placing hot items directly on the table surface without protection.
• Keep children away from the table during expansion/retraction to prevent injury.

Introduction

Thank you for choosing the MFSTUDIO 7-Piece Expandable Metal Patio Dining Set. This set includes one rectangular expandable dining table and six metal mesh swivel chairs, designed for comfort and versatility in your outdoor living space. The table features an innovative extension mechanism, allowing it to adapt to various gathering sizes, while the chairs offer 360-degree swivel and gentle rocking for enhanced relaxation. This manual provides comprehensive instructions for assembly, operation, and maintenance to ensure long-lasting enjoyment of your new patio dining set.

Package Contents

Your MFSTUDIO 7-Piece Patio Dining Set is shipped in multiple packages. You may receive 4 packages on different days: 1 package for the dining table and 3 packages for the 6 chairs. Please verify all components are present before beginning assembly.

• 1 x Expandable Metal Dining Table
• 6 x Metal Swivel Chairs
• 6 x Seat Cushions
• 1 x Hardware Pack (bolts, washers, Allen wrench)
• 1 x Instruction Manual

Assembly Instructions

Please follow these steps carefully for proper assembly. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.

Table Assembly

1. Unpack all table components and lay them out. Identify the table legs, tabletop sections, and hardware.
2. Attach the table legs to the main tabletop frame using the provided bolts and washers. Do not fully tighten yet.
3. Carefully align the expandable leaf mechanism. Ensure smooth movement.
4. Once all components are loosely assembled, place the table upright and gently rock it to ensure it is level. Then, fully tighten all bolts.

Image: The expandable patio dining table set, illustrating its versatile design.

Chair Assembly

1. Unpack all chair components. Each chair typically consists of a seat frame, backrest, armrests, and a swivel base.
2. Attach the backrest to the seat frame using the designated bolts.
3. Secure the armrests to both the seat frame and backrest.
4. Connect the assembled chair top to the swivel base. Ensure the swivel mechanism is correctly oriented and all bolts are aligned.
5. Once all parts are loosely connected, place the chair on a flat surface and fully tighten all bolts.
6. Place the seat cushion onto the chair. The cushions feature Velcro fastenings to secure them to the chair frame.

Image: A MFSTUDIO swivel patio chair, highlighting its 360-degree rotation capability for comfort and flexibility.

Operating Instructions

Expanding the Dining Table

The MFSTUDIO dining table features an easy-to-use extension mechanism to accommodate more guests.

1. Gently pull the two ends of the table apart. The middle section will reveal the hidden leaf.
2. Lift the hidden leaf from its storage position and rotate it into place.
3. Push the two table ends back together until they meet the extended leaf, securing it in place.
4. To retract, reverse the steps: pull the ends apart, fold and store the leaf, then push the ends back together.

Image: A visual guide demonstrating the three steps to expand the dining table.

Using the Swivel Chairs

The swivel chairs are designed for maximum comfort and mobility. They allow for a full 360-degree rotation and a gentle rocking motion. Simply sit back and enjoy the flexibility to turn and adjust your position as desired.

Maintenance

Proper care will extend the life and appearance of your MFSTUDIO patio dining set.

Cleaning

• Metal Frame: Wipe clean with a damp cloth and mild soap. Rinse thoroughly and dry completely to prevent rust. Avoid harsh chemicals or abrasive cleaners.
• Cushions: The cushions feature removable covers for easy cleaning. Spot clean with a mild soap solution and water. For deeper cleaning, remove covers and hand wash or machine wash on a gentle cycle with cold water. Air dry only. Do not bleach or iron.

Image: Close-up of a cushion, showing the zipper for easy removal of the cover for cleaning.

Image: Detail of the Velcro fastening straps on the cushion, designed to secure it to the chair frame.

Storage

During harsh weather conditions or prolonged periods of non-use, it is recommended to store the furniture indoors or cover it with a protective outdoor furniture cover. The chairs are stackable for convenient storage.

Troubleshooting

• Wobbly Table/Chairs: Ensure all bolts are fully tightened. Check that the furniture is placed on a level surface. The table features adjustable non-slip footcaps for minor leveling adjustments.
• Difficulty Expanding Table: Ensure the table ends are pulled sufficiently apart before attempting to lift and rotate the leaf. Check for any obstructions in the sliding mechanism.
• Cushions Sliding: Utilize the built-in Velcro straps to secure the cushions to the chair frames.

Specifications

Image: Detailed product dimensions for both the expandable table and the swivel chairs.

Warranty and Support

MFSTUDIO stands behind the quality of its products. For specific warranty information, please refer to the warranty card included with your purchase or contact MFSTUDIO customer service directly. If you encounter any issues or have questions regarding your product, please reach out to our support team for assistance.

Contact Information: Please refer to the contact details provided on the product packaging or the official MFSTUDIO website.