Introduction
The SMALLRIG Mini Side Handle Handgrip 2916 is designed to enhance the handling and stability of mirrorless, digital, and other small cameras when used with a camera cage. It provides a comfortable and secure grip, improving the overall shooting experience for filmmakers and content creators. This manual provides detailed instructions for the proper setup, operation, and maintenance of your Mini Side Handle.
Image: The SMALLRIG Mini Side Handle Handgrip 2916, showcasing its ergonomic design and attachment mechanism.
What's in the Box
- 1 x Handle
- 1 x Hex Spanner
Key Features
- Side Handle for Camera Cage: Designed for camera cages with two 1/4"-20 threaded holes spaced 18mm apart on the side.
- For Right-Hand/Left-Hand Use: Easily switchable between left-handed and right-handed configurations using the built-in wrench.
- Ergonomic Design: Constructed from aluminum alloy and PC+ABS for a comfortable and secure grip during extended use.
- Mounting Options: Features a cold shoe mount (compatible with accessories like Cold Shoe 1241) and an eyelet for attaching a wrist strap (e.g., 2456).
- Lightweight & Portable: Weighs only 139g, making it a compact and easy-to-carry accessory.
Image: Comparison illustrating the lightweight nature of the Mini Side Handle (139g) compared to heavier alternatives.
Setup Guide
Attaching the Handle to Your Camera Cage
- Identify two 1/4"-20 threaded holes on the side of your camera cage with an 18mm distance between them. The SmallRig Mini Side Handle is compatible with cages such as SmallRig Cage 2999, 2493, 2087, and others meeting this specification.
- Align the two 1/4"-20 screws on the handle's attachment plate with the threaded holes on your camera cage.
- Use the included hex spanner to securely tighten the screws. Ensure the handle is firmly attached to prevent any movement during use.
Image: Diagram showing the dual 1/4"-20 screw mount and anti-slip silicone gel coverings for secure attachment.
Operating Instructions
Adjusting for Right-Hand or Left-Hand Use
The Mini Side Handle is designed for versatile use and can be quickly switched between left-handed and right-handed configurations. To change the orientation, simply remove the connection part of the handle and reattach it in the desired direction. The built-in wrench facilitates this quick adjustment.
Image: Illustration demonstrating the quick switch mechanism for left-to-right side configuration.
Adjusting Handle Height
The handle's position can be adjusted up and down to suit your specific needs and cage height. Loosen the screws, slide the handle to your preferred vertical position, and then re-tighten the screws securely.
Image: Visual guide for adjusting the handle's vertical position on the camera cage.
Utilizing Additional Mounting Options
The Mini Side Handle features a cold shoe mount and an eyelet for expanded functionality:
- Cold Shoe Mount: Attach external accessories such as a flash, microphone, or small LED light (e.g., SmallRig Cold Shoe 1241) to the integrated cold shoe.
- Strap Eyelet: Secure a wrist strap (e.g., SmallRig 2456) through the eyelet to prevent accidental drops and add an extra layer of security for your camera setup.
Image: The Mini Side Handle with a microphone attached via the cold shoe, demonstrating its accessory mounting capabilities.
Maintenance
To ensure the longevity and optimal performance of your SMALLRIG Mini Side Handle, follow these maintenance guidelines:
- Cleaning: Wipe the handle with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Screw Tightness: Periodically check the tightness of the 1/4"-20 screws that attach the handle to your cage. Re-tighten with the hex spanner if necessary to maintain a secure connection.
- Storage: Store the handle in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
- Load Capacity: The maximum bearing capacity of the handle is 3.5kg (7.7 lbs). Do not overload the handle with excessive weight, as this may cause damage to the handle or your equipment.
Troubleshooting
If you encounter any issues with your Mini Side Handle, refer to the following common problems and solutions:
- Handle feels loose after attachment: Ensure the 1/4"-20 screws are fully tightened using the included hex spanner. Verify that your camera cage has the correct 18mm spacing between the threaded holes for optimal fit.
- Difficulty switching hand orientation: Make sure the connection part is fully disengaged before attempting to change direction. Apply gentle force and ensure no debris is obstructing the mechanism.
- Accessories not fitting the cold shoe: Check that the accessory's cold shoe mount is compatible with standard cold shoe dimensions. Ensure no foreign objects are lodged in the cold shoe slot.
- Handle feels uncomfortable: Adjust the handle's vertical position up or down to find the most ergonomic and comfortable grip for your hand size and shooting style.
If the issue persists after attempting these solutions, please contact SMALLRIG customer support for further assistance.
Specifications
| Specification | Detail |
|---|---|
| Model Number | 2916-CF |
| Product Dimensions | 2.99 x 1.65 x 3.94 inches (7.59 x 4.19 x 10.01 cm) |
| Item Weight | 4.9 ounces (139 grams) |
| Material | Aluminum Alloy, PC+ABS |
| Mounting Type | Dual 1/4"-20 Screws (18mm distance) |
| Maximum Weight Recommendation | 3.5 Kilograms (7.7 lbs) |
| Color | Black |
Warranty and Support
SMALLRIG products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please visit the official SMALLRIG website or contact their customer service department directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Online Support: www.smallrig.com
