1. Product Overview
The Ledvance LED Floodlight GEN 3 is a versatile and robust lighting solution designed for various outdoor applications. This floodlight features a reflector-based, symmetrical light distribution with a wide beam angle, providing efficient and uniform illumination.
Key Features:
- Power: 20W
- Luminous Flux: 2400 Lumen
- Color Temperature: 4000 Kelvin (Cool White)
- Beam Angle: 100° x 100°
- Voltage: Integrated wide voltage driver, suitable for 100 - 277 VAC
- Protection Rating: IP65 (suitable for outdoor use)
- Surge Protection: Up to 4 kV (L/N-PE), 2 kV (L-N)
- Cable: Pre-installed, flexible 1 m cable (H05RN-F), 3 x 1.0 mm² single wires
- Mounting: Mounting bracket with 30° angle and wide rotation range
- Material: Aluminum housing, glass diffuser
Intended Use:
This floodlight is designed for outdoor use (IP65) and serves as an energy-efficient replacement for traditional halogen floodlights. Ideal applications include:
- Public areas
- Building facades
- Construction sites
- Gardens, balconies, and other outdoor spaces
2. Safety Instructions
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Installation and maintenance should only be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
- Voltage Compatibility: Verify that the supply voltage (100-277 VAC) matches the floodlight's requirements.
- Grounding: Ensure proper grounding of the floodlight to prevent electric shock.
- IP65 Rating: The floodlight is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
- Heat: Do not cover the floodlight during operation to ensure proper heat dissipation.
- Damage: Do not operate the floodlight if the cable or housing is damaged. Contact a qualified technician for repair.
- Light Source: The LED light source is not user-replaceable. Do not attempt to open the floodlight housing.
3. Package Contents
Upon unpacking, please ensure all components are present and undamaged:
- 1 x Ledvance LED Floodlight 20W
- Integrated mounting bracket
- Pre-installed 1m flexible connection cable
Image 1: Front view of the Ledvance LED Floodlight GEN 3. This image shows the compact design and the robust housing of the floodlight.
4. Setup and Installation
Follow these steps for proper installation of your Ledvance LED Floodlight. Professional installation is recommended.
- Preparation: Disconnect the main power supply before starting any installation work. Ensure the mounting surface is stable and can support the weight of the floodlight.
- Mounting the Bracket: The floodlight comes with an integrated mounting bracket. Secure the bracket to the desired surface using appropriate screws and anchors (not included). The bracket allows for a 30° angle adjustment and a wide rotation range for optimal light positioning.
- Electrical Connection: Connect the pre-installed 1m flexible cable to your main power supply. Ensure correct wiring: Live (L), Neutral (N), and Earth (PE). The floodlight is designed for 100-277 VAC. Use appropriate waterproof connectors for outdoor installations to maintain the IP65 rating.
- Adjusting Light Direction: Once mounted and connected, adjust the floodlight's angle using the mounting bracket to achieve the desired illumination area. Tighten all fasteners securely.
- Power On: Restore power to the circuit. The floodlight should illuminate.
Image 2: Side view of the floodlight showing the adjustable mounting bracket. This image illustrates how the bracket allows for flexible positioning.
5. Operating Instructions
The Ledvance LED Floodlight GEN 3 operates as a standard lighting fixture. Once properly installed and connected to a power source, it can be controlled via a wall switch or an external timer/sensor system (not included).
- Switching On/Off: Use the connected power switch to turn the floodlight on or off.
- Light Direction: The floodlight's angle can be adjusted after installation by loosening the bracket screws, repositioning the fixture, and then re-tightening the screws.
6. Maintenance
The Ledvance LED Floodlight is designed for durability and requires minimal maintenance.
- Cleaning: Periodically clean the floodlight's surface and glass diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or optical components. Ensure the power is off before cleaning.
- Inspection: Regularly inspect the cable and housing for any signs of wear or damage. If any damage is found, disconnect power immediately and have it inspected by a qualified electrician.
- No User Serviceable Parts: The LED light source and internal components are not user-serviceable. Do not attempt to open or repair the floodlight yourself.
7. Troubleshooting
If you encounter issues with your floodlight, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Floodlight does not turn on | No power supply Loose wiring connection Faulty switch/circuit breaker | Check power supply to the circuit. Verify all electrical connections are secure (ensure power is off first). Test the switch or circuit breaker. |
| Light flickers | Unstable power supply Loose connection | Ensure stable power supply. Check electrical connections. |
| Reduced light output | Dirty diffuser Aging LED (unlikely for new product) | Clean the glass diffuser. If problem persists, contact support. |
If the problem persists after attempting these solutions, please contact Ledvance customer support or a qualified electrician.
8. Specifications
| Specification | Value |
|---|---|
| Brand | LEDVANCE |
| Model Number | 4058075421011 |
| Part Number | FL PFM 20W/4000K SYM 100 BK LEDV |
| Product Dimensions (L x W x H) | 14.4 x 15.6 x 4.2 cm |
| Weight | 400 g |
| Wattage | 20 Watt |
| Luminous Flux | 2400 Lumen |
| Color Temperature | 4000 Kelvin (Cool White) |
| Voltage | 100 - 277 Volt AC |
| IP Rating | IP65 |
| Beam Angle | 100 Degrees |
| Material | Aluminum (housing), Glass (diffuser) |
| Finish | Black |
| Average Lifespan | Up to 70,000 Hours (L70/B50 at 25 °C) |
| Energy Efficiency Class | E |
Image 3: Technical drawing showing the dimensions of the floodlight (144mm L x 156mm W x 42mm H).
Image 4: Illuminance cone diagram for the floodlight, showing light distribution and intensity at various distances.
Image 5: Polar diagram illustrating the symmetrical light distribution pattern of the floodlight.
9. Warranty and Support
The Ledvance LED Floodlight GEN 3 comes with a 5-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact your retailer or visit the official Ledvance website for customer service information.
Please retain your proof of purchase for warranty purposes.
