1. Introduction
Thank you for choosing the Lepro 20W LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlights. Please read these instructions carefully before use and retain them for future reference.
Image 1.1: Two Lepro 20W LED Floodlights with power cable. These floodlights are designed for outdoor use, providing bright and efficient illumination.
2. Safety Instructions
To ensure safe operation, always follow these guidelines:
- Electrical Safety: Ensure the power supply is disconnected before installation or maintenance. All electrical connections must comply with local wiring regulations. If unsure, consult a qualified electrician.
- Grounding: The floodlight must be properly grounded to prevent electric shock.
- Voltage: Verify that the supply voltage matches the floodlight's rated voltage (240 Volts AC).
- Water Resistance: The product is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, do not submerge the unit in water.
- Heat: The floodlight generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
- Mounting: Ensure the mounting surface is strong enough to support the weight of the floodlight.
- Light Source: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
3. Package Contents
Your package should contain the following items:
- 2 x Lepro 20W LED Floodlights
- Instruction Manual (this document)
4. Product Features
The Lepro 20W LED Floodlight offers the following key features:
- Ultra-Bright and Energy-Efficient: Utilizes SMD 2835 LEDs and an optimized reflector design to deliver 1700 lumens of daylight white light (5000K) with only 20W of power consumption, equivalent to a 140W halogen lamp.
- Durable and Weatherproof: Constructed from die-cast aluminum and tempered glass, with an IP65 rating for resistance against dust and water, suitable for all weather conditions.
- Efficient Heat Dissipation: Features an ultra-thin housing and integrated heat sink design for effective heat management, extending the product's lifespan.
- Wide Beam Angle: Provides a 110° beam angle for broad illumination coverage.
- 360° Rotatable Bracket: The mounting bracket allows for 360° rotation, enabling flexible adjustment of the light direction.
- Easy Installation: Designed for straightforward installation on various surfaces.
Image 4.1: Key lighting specifications of the floodlight, including LED quantity, color temperature, brightness, and beam angle.
Image 4.2: Illustration of the floodlight's coverage, demonstrating that 20W provides 1700 lumens, effectively illuminating a 5-meter diameter area when mounted at 4 meters height.
Image 4.3: The rear of the floodlight, illustrating the heat dissipation fins designed to efficiently release heat and prolong the product's lifespan.
Image 4.4: The 360° rotatable bracket, allowing for flexible adjustment of the light direction to suit various illumination needs.
Image 4.5: Demonstrates the floodlight's durability and weather resistance, highlighting its IP65 waterproof rating, heat resistance, and frost resistance for reliable performance in diverse outdoor conditions.
5. Specifications
| Attribute | Value |
|---|---|
| Brand | Lepro |
| Model Number | PR340011-DW-EU-2 |
| Product Dimensions (L x W x H) | 10.82 x 2.6 x 9.6 cm |
| Weight | 540 grams |
| IP Rating | IP65 |
| Number of Items | 2 |
| Style | Modern |
| Color | Cool White/Black |
| Material | Aluminum, Tempered Glass |
| Maximum Wattage | 20 Watts |
| Voltage | 240 Volts (AC) |
| Specific Uses | Outdoor and enclosed spaces |
| Special Features | Energy Efficient |
| Luminous Flux | 1700 lm |
| Color Rendering Index (CRI) | 80.00 |
| Power Source | AC |
| Installation Type | Wall Mount |
Image 5.1: Detailed dimensions of the floodlight, including length, width, and height, along with cable length, provided in both millimeters and inches for precise planning.
6. Installation
Follow these steps for proper installation:
- Preparation: Before starting, ensure the power supply is turned off at the main circuit breaker.
- Mounting Location: Choose a suitable location for the floodlight. The included bracket allows for mounting on walls, ceilings, or directly on the ground.
- Marking: Use the bracket as a template to mark the drilling points on the desired surface.
- Drilling: Drill holes at the marked points. Insert appropriate wall plugs if mounting on masonry.
- Secure Bracket: Attach the bracket securely to the surface using screws (not included). The bracket features 2 self-locking screws for easy removal of the spot without tools.
- Adjust Angle: The bracket is 360° rotatable. Adjust the floodlight to the desired angle before tightening the bracket screws.
- Wiring: Connect the floodlight's 1-meter power cable to your electrical supply. Ensure correct wiring: brown wire for Live, blue wire for Neutral, and green/yellow wire for Ground. Use a waterproof junction box for outdoor connections (not included).
- Final Check: Double-check all connections and ensure the floodlight is securely mounted.
- Power On: Restore power at the main circuit breaker.
Image 6.1: Various installation methods for the floodlight, demonstrating its versatility for mounting on walls, ground, or ceilings.
7. Operation
Once installed and connected to a power source, the Lepro 20W LED Floodlight will illuminate when power is supplied. There are no additional controls on the unit itself. Operation is typically controlled via an external switch or timer connected to the power circuit.
Image 7.1: Examples of the floodlight in various applications, including residential and commercial outdoor spaces, showcasing its effective illumination.
8. Maintenance
The Lepro LED Floodlight requires minimal maintenance:
- Cleaning: Periodically clean the glass surface with a soft, damp cloth to ensure optimal light output. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the unit inspected by a qualified professional.
- No User-Serviceable Parts: The LED light source is integrated and not replaceable by the user. Do not attempt to open the housing.
9. Troubleshooting
If you encounter issues with your floodlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty external switch | Check power supply and circuit breaker. Verify all wiring connections are secure (ensure power is off first). Test the external switch or bypass it temporarily. |
| Light is dim or flickers | Unstable power supply Incorrect voltage Damaged unit | Ensure stable power supply. Verify input voltage matches specifications. If issues persist, contact customer support. |
| Water inside the unit | Improper installation Damage to housing/seal | Ensure all seals are intact and installation is correct. Disconnect power immediately. Contact customer support. |
If the problem persists after attempting these solutions, please contact Lepro customer support.
10. Warranty and Support
Lepro products are designed for reliability and performance. For warranty information or technical support, please refer to the official Lepro website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
For more information, visit the Lepro Store.
