1. Product Overview
The GinTai VESA Adapter Mount Bracket (Model NZ3703-1) is designed to securely attach compatible Intel NUC Mini PCs to the back of a computer monitor. This allows for a cleaner workspace and efficient use of desk space by integrating the mini PC directly with the display.
Important Note: This product is a replacement part for a VESA adapter bracket. Please verify that you do not already possess a VESA mounting bracket before purchasing.
Figure 1: GinTai VESA Adapter Mount Bracket and included screws.
2. Compatibility
This VESA mount bracket is compatible with various Intel NUC Mini PC models. It is designed to fit standard VESA mounting patterns of 75x75mm and 100x100mm on the back of monitors.
Compatible Intel NUC Models:
- NUC8i7BEH, NUC8i5BEH, NUC8i3BEH, NUC8i5BEK, NUC8i3BEK, NUC8i3CYSM
- NUC7i7DNHE, NUC7i7DNKE, NUC7i5DNHE, NUC7i5DNKE, NUC7i3DNHE, NUC7i3DNKE
- NUC5i5MYHE, NUC5i3MYHE
- NUC7i7BNH, NUC7i5BNH, NUC7i5BNK, NUC7i3BNH, NUC7i3BNK
- NUC5i7RYH, NUC5i5RYH, NUC5i5RYK, NUC5i3RYHS, NUC5i3RYK
- NUC7PJYH, NUC7CJYH, NUC7CJYSAL
- NUC6CAYH, NUC6CAYS
- NUC7i7BNHX1, NUC7i5BNHX1, NUC7i3BNHX1
- Intel NUC 4th, 5th, 6th, 7th, 8th, 10th, 11th Generations
Note: This bracket is not compatible with the Intel NUC Hades Canyon series.
3. Package Contents
Verify that all items are present in the package:
- 1 x GinTai VESA Adapter Mount Bracket
- 8 x Mounting Screws
Figure 2: Included mounting screws.
4. Installation Instructions
Follow these steps to install the VESA adapter mount bracket:
- Identify VESA Mounting Points: Locate the VESA mounting holes on the back of your monitor. These are typically arranged in a square pattern (75x75mm or 100x100mm).
Figure 3: VESA mounting patterns on the bracket.
- Attach Bracket to Monitor: Align the GinTai VESA Adapter Mount Bracket with the VESA mounting holes on your monitor. Ensure the "THIS WAY UP" arrow on the bracket points upwards. Use four of the provided screws to secure the bracket to the monitor. Tighten securely, but do not overtighten.
Figure 4: Front of the bracket with orientation indicator.
- Mount Intel NUC: Carefully slide your compatible Intel NUC Mini PC onto the bracket. The NUC should slide into the designated slots on the bracket.
- Secure NUC (if applicable): Depending on your NUC model, you may use additional screws (not always included with this bracket, typically come with the NUC) to further secure the NUC to the bracket. Refer to your Intel NUC's manual for specific mounting instructions.
Once installed, your Intel NUC Mini PC will be discreetly mounted behind your monitor, optimizing your workspace.
5. Operation
The GinTai VESA Adapter Mount Bracket is a passive component. Once installed, it requires no further operation. Your Intel NUC Mini PC will function as normal while securely mounted to the monitor.
6. Maintenance
This product requires minimal maintenance. Periodically check the following:
- Ensure all screws remain tight.
- Wipe the bracket with a dry, soft cloth to remove dust. Avoid abrasive cleaners.
7. Troubleshooting
If you encounter issues during installation or use, consider the following:
- Bracket does not fit monitor: Verify your monitor supports VESA 75x75mm or 100x100mm mounting patterns.
- Intel NUC does not fit bracket: Double-check the compatibility list in Section 2. Ensure your NUC model is supported and that it is not a Hades Canyon NUC.
- Screws do not fit: Ensure you are using the correct screws for the monitor's VESA holes and the NUC's mounting points. The included screws are for attaching the bracket to the monitor.
- Loose mounting: Ensure all screws are tightened appropriately. Do not overtighten to avoid stripping threads.
8. Product Specifications
| Feature | Specification |
|---|---|
| Brand | GinTai |
| Model Number | NZ3703-1 |
| Mounting Type | Monitor Mount |
| Compatible VESA Spacing | 75 x 75 mm, 100 x 100 mm |
| Item Weight | 4.2 ounces (0.12 Kilograms) |
| Package Dimensions | 5.55 x 4.92 x 0.87 inches |
| UPC | 192771430848 |
9. Warranty and Support
Information regarding warranty and customer support for the GinTai VESA Adapter Mount Bracket (Model NZ3703-1) is not provided in this manual. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support.
