Porseme 3D Ultrasonic Humidifier User Manual

1. Introduction

Thank you for purchasing the Porseme 3D Ultrasonic Humidifier. This device is designed to enhance your environment by diffusing essential oils and providing a soothing ambiance with its silent operation and color-changing LED lights. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following safety guidelines:

• Avoid direct skin contact with undiluted essential oils.
• Keep the device out of reach of children and pets.
• Ensure proper ventilation in the area where the humidifier is used.
• Do not exceed the maximum water capacity of 280ml.
• Always unplug the device before cleaning or refilling.
• Do not place the device on uneven or unstable surfaces.

3. Product Overview

The Porseme 3D Ultrasonic Humidifier features a unique handcrafted glass cover and a wood-grain base. It operates silently, offering both aromatherapy and ambient lighting functions.

Key Features:

• Capacity: 280 ml water tank, providing up to 7 hours of continuous mist.
• Timer Functions: Auto shut-off, 1-hour, 3-hour, and 5-hour timer settings.
• LED Lighting: 7 color-changing LED lights with ON/OFF control.
• Automatic Shut-off: The device automatically turns off when water runs low to prevent overheating.
• Material: BPA-free construction with a handcrafted glass cover.

4. Setup Instructions

Follow these steps to set up your humidifier for first use:

1. Remove the aroma diffuser and all accessories from its packaging.
2. Place the diffuser on a flat, stable surface.
3. Remove the glass cover and the inner lid.
4. Fill the water tank with clean tap water up to the 280 ml MAX line. Do not overfill.
5. Add 4-6 drops of your preferred essential oil directly into the water tank. Adjust the amount based on desired fragrance intensity.
6. Replace the inner lid and then the glass cover securely.
7. Connect the AC adapter to the power input port at the base of the diffuser, then plug the adapter into a standard electrical outlet.

5. Operating Instructions

Once set up, operate your humidifier using the buttons on the front base:

Mist Control:

• Press the Mist button once to turn on continuous mist.
• Press the Mist button repeatedly to cycle through timer settings: 1 hour, 3 hours, 5 hours, and then off.
• The diffuser will automatically shut off when the water level is too low, regardless of the timer setting.

Light Control:

• Press the Light button once to turn on the 7-color changing LED lights.
• Press the Light button again to pause on a specific color.
• Press the Light button repeatedly to cycle through individual colors.
• Press and hold the Light button for 2 seconds to turn off the lights.

6. Maintenance

Regular cleaning is essential to ensure optimal performance and longevity of your humidifier.

Cleaning Instructions:

1. Unplug the diffuser from the power outlet and remove the glass cover.
2. Pour out any remaining water from the tank, ensuring to pour away from the air outlet.
3. Wipe the inside of the water tank with a soft cloth or sponge. For stubborn residue, use a small amount of mild detergent or white vinegar.
4. Gently clean the ultrasonic disc (the small ceramic disc at the bottom of the tank) with a cotton swab dipped in white vinegar. Do not scrub or use abrasive materials.
5. Rinse the tank thoroughly with clean water, ensuring no detergent residue remains.
6. Wipe the exterior of the diffuser with a soft, dry cloth.
7. Allow all parts to air dry completely before reassembling or storing.

Note: Clean the diffuser after every 5-6 uses or once a week for best results.

7. Troubleshooting

If you encounter any issues with your Porseme 3D Ultrasonic Humidifier, please refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

Information regarding product warranty and customer support was not available in the provided product data. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support for assistance.