1. Introduction
The iDiskk Phone Timed Lock Box is designed to help users manage their phone usage effectively. By securely locking away your device for a set period, it promotes focus, productivity, and a healthier digital lifestyle. This manual provides detailed instructions for the setup, operation, and maintenance of your iDiskk lock box.
2. Setup
2.1 Unboxing and Initial Charge
Upon unboxing your iDiskk Phone Timed Lock Box, ensure all components are present. Before first use, fully charge the device. The lock box features a 900mAh battery with a standby period of up to 30 days and a full charge time of approximately 4 hours.

Figure 1: The iDiskk Phone Timed Lock Box connected to a power adapter for charging. The display shows charging status, and the device features a 900mAh battery for extended standby time.
2.2 Device Overview
Familiarize yourself with the key components of your lock box:
- Time Setting Display: Digital screen showing set time and countdown.
- Hour Setting Button: Adjusts hours for the timer.
- Minute Setting Button: Adjusts minutes for the timer.
- Start or Cancel Button: Initiates or cancels the locking sequence.
- Charging Indicator: Light indicating charging status.
- Status Indicator Light: Provides visual feedback on device status.
- Emergency Call/Message Holes: Strategically placed openings to allow for emergency communication and charging while locked.

Figure 2: Detailed diagram highlighting the time setting display, hour/minute adjustment buttons, start/cancel button, charging indicator, status light, and emergency access holes on the iDiskk lock box.
3. Operating Instructions
3.1 Placing Your Phone
The iDiskk lock box is designed to fit most smartphones, including large models like iPhone 15/14/13/12/11/X/XR/XS/8 series and Samsung S/Note/Ultra series. Ensure your phone fits comfortably within the compartment. You can place your phone face up or face down, depending on your preference for screen visibility during the locked period.

Figure 3: An iPhone placed inside the iDiskk Phone Timed Lock Box. The transparent cover allows for partial screen visibility and access to emergency functions.
3.2 Setting the Timer
- Open the transparent lid of the lock box.
- Place your phone inside the designated compartment.
- Use the "Hour Setting Button" (up/down arrows for hours) and "Minute Setting Button" (up/down arrows for minutes) to set your desired lock duration. The timer can be set from 1 minute to 99 hours.
- Close the transparent lid.
- Press the "Start or Cancel Button" twice quickly to initiate the locking sequence. A 10-second countdown will appear on the display, allowing you to cancel if needed.
- Once the countdown finishes, the lock box will automatically secure your phone. The display will show the remaining time.
3.3 Emergency Access and Charging
The lock box features functional slots and holes that allow for emergency calls or messages to be received. You can also recharge your phone through the slot using cables while it is locked. To perform an emergency unlock, press the "Hour Up" button 10 times. This feature is limited to 5 uses before it becomes unavailable until the timer expires.

Figure 4: Close-up of the iDiskk lock box showing the strategically placed openings for emergency calls and messages, allowing limited interaction while the phone is secured.
4. Maintenance
- Cleaning: Wipe the exterior with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Charging: Recharge the lock box using the provided USB-C cable when the battery indicator is low.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not turning on. | Low battery. | Charge the device fully using the provided USB-C cable. |
| Lock mechanism not engaging. | Lid not properly closed or timer not set correctly. | Ensure the lid is fully closed and the timer is set, then press the start button twice. |
| Emergency unlock not working. | Exceeded 5 emergency unlock attempts or device malfunction. | Wait for the timer to expire. If attempts remain, ensure correct button sequence (Hour Up 10 times). Contact support if persistent. |
| Phone not fitting. | Phone size or case too bulky. | Remove bulky phone cases. Refer to specifications for maximum phone dimensions. |
6. Specifications
- Brand: iDiskk
- Model Number: LOCK001-USA
- Product Dimensions (D x W x H): 4.72" x 7.52" x 0.94"
- Lock Type: Electronic Combination Lock
- Control Type: Touchpad Control
- Battery Capacity: 900mAh
- Standby Time: Up to 30 days
- Full Charge Time: Approximately 4 hours
- Timer Range: 1 minute to 99 hours
- Compatibility: Compatible with Android Phones, iPhone 15/15Pro/15Plus/15Pro Max/14/14Pro/13Pro/13 /12 Pro Max /12/11/X/XR/XS/8
- Item Weight: 11.36 ounces
- Water Resistance Level: Not Water Resistant
7. Warranty & Support
The iDiskk Phone Timed Lock Box (Model LOCK001-USA) comes with a 1-year manufacturer warranty. For warranty claims, technical support, or any inquiries regarding your product, please contact iDiskk customer service through their official website or the retailer where the product was purchased.
For additional information and support, please visit the iDiskk Store on Amazon.





