Introduction
Thank you for choosing DAYBETTER Smart RGB LED Strip Lights. This manual provides essential information for the safe and efficient use of your new LED strip lights. These 50ft (two 25ft rolls) LED strips feature app control, IR remote control, music synchronization, and timing settings, allowing for versatile lighting in various indoor environments.
Safety Information
- Ensure the power supply voltage matches the product's requirements (12V).
- Do not connect the LED strip to 24V or AC 220V power directly.
- Avoid folding or bending the LED strip at sharp angles to prevent damage.
- Keep the product away from water and high humidity environments as it is designed for indoor use only.
- Do not cover the LED strip with flammable materials.
- Disconnect power before cleaning or maintenance.
Package Contents
Verify that all items are present in your package:
- 50ft (2 x 25ft) RGB LED Strip Lights
- IR Remote Control
- Power Adapter
- LED Controller
- User Instruction Manual (this document)
Image: Contents of the DAYBETTER LED Strip Lights package, showing the LED rolls, remote, and power supply.
Setup
1. Unboxing and Component Overview
Before installation, familiarize yourself with the components. The video below provides an unboxing overview.
Video: An unboxing of the DAYBETTER LED Strip Lights, showing the contents and initial setup steps.
2. Surface Preparation
For optimal adhesion, ensure the installation surface is clean, dry, and smooth. Avoid rough or dusty surfaces.
- Clean the surface thoroughly with a dry cloth.
- Allow the surface to dry completely before proceeding.
3. Connecting the LED Strip Lights
Follow these steps to connect the LED strip to the controller and power supply:
- Connect the LED strip to the LED controller. Ensure the arrows on both connectors align.
- Connect the LED controller to the power adapter.
- Plug the power adapter into a suitable power outlet.
Image: Step-by-step visual guide for connecting the LED strip components.
4. Installing the LED Strips
Carefully peel off the adhesive backing and press the LED strip firmly onto the prepared surface. Apply gentle pressure along the entire length to ensure good contact. Avoid stretching the strip during installation.
Image: Example of DAYBETTER LED strip lights installed in a room, providing ambient lighting.
Operating
1. IR Remote Control
The included 24-key IR remote allows for basic control of your LED strip lights.
- ON/OFF: Turn the lights on or off.
- Brightness Adjustment: Increase or decrease light intensity.
- Color Selection: Choose from various static colors (Red, Green, Blue, White, Orange, Yellow, Cyan, Purple, etc.).
- Dynamic Modes: Select from modes like Flash, Strobe, Fade, and Smooth for automatic color changes.
Image: The IR remote control and smartphone app interface for controlling the LED lights.
2. Smart App Control
Enhance your experience by controlling the LED lights via the dedicated smartphone app. The app offers advanced features such as music synchronization and timing settings.
- Download the App: Scan the QR code provided in the package or search for "Apollo Lighting" or "Apollo Life" in your app store.
- Bluetooth Connection:
- Enable Bluetooth on your smartphone.
- Open the "Apollo Lighting" app. The app will automatically connect to the LED light strip.
- If connection fails, disconnect the power cord and Bluetooth receiver, then reconnect. Close and restart the app if necessary.
- Music Sync: The app allows the lights to change color and rhythm in sync with music played through your smartphone's microphone.
- Timing Settings: Set schedules to automatically turn the lights on/off or change colors at specific times.
Image: The music synchronization feature of the DAYBETTER LED light app in action.
Maintenance
- Cleaning: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners.
- Storage: If storing the lights for an extended period, ensure they are clean, dry, and rolled neatly to prevent damage.
- Adhesive: The adhesive is strong, but for long-term stability, especially on textured surfaces, additional clips or stronger adhesive may be required.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | Loose connection, no power, remote battery dead. | Check all connections, ensure power adapter is plugged in, replace remote battery. |
| Remote control not working. | Remote battery dead, IR receiver blocked, remote too far. | Replace remote battery, ensure clear line of sight to IR receiver, operate within range. |
| App cannot connect to lights. | Bluetooth off, app glitch, power cycle needed. | Ensure Bluetooth is enabled, close and restart the app, disconnect and reconnect power to the LED strip. |
| Lights are dim or inconsistent colors. | Power supply issue, damaged LED segment. | Ensure adequate power supply. If a segment is damaged, it may require replacement of the strip. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DAYBETTER |
| Model Number | DB50111524G-DAUS0D2 |
| Length | 50 Feet (2 x 25ft rolls) |
| LED Type | 5050 RGB LED Chips |
| Control Method | App Control, IR Remote Control |
| Special Features | Color Changing, Dimmable, Music Sync, Timer Function |
| Power Source | Corded Electric |
| Voltage | 12 Volts |
| Wattage | 54 Watts |
| Indoor/Outdoor Usage | Indoor Only |
| Material | LED (Shade Material: LED) |
Warranty and Support
DAYBETTER products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your LED strip lights, please refer to the contact information provided on the product packaging or visit the official DAYBETTER website.
You can visit the official DAYBETTER store on Amazon for more products and support: DAYBETTER Amazon Store
