Introduction
This user manual provides essential information for the safe and efficient operation of your OSRAM TYREinflate 450 Digital Tyre Pump. Please read these instructions carefully before first use and retain them for future reference.
Figure 1: OSRAM TYREinflate 450 Digital Tyre Pump overview.
Safety Information
Always ensure the vehicle engine is running when using the pump to avoid draining the car battery. Do not leave the pump unattended during operation. Avoid over-inflating tyres; always refer to your vehicle's recommended tyre pressure. Keep out of reach of children.
Product Components
The OSRAM TYREinflate 450 includes the main compressor unit, a flexible air hose with a screw-on valve connector, a 12V power cable with a cigarette lighter plug, and a set of adapters for various inflatables.
Figure 2: Diagram showing the main components of the TYREinflate 450.
- Digital Display: Shows current and target pressure.
- Pressure Adjustment Buttons: Used to set desired pressure.
- Power Button: To turn the compressor on and off.
- LED Light Button: Activates the integrated LED work light.
- Air Hose: Connects to tyre valve.
- 12V Power Cable: Connects to vehicle's cigarette lighter socket.
- Accessory Adapters: For bicycles, balls, and other inflatables.
Setup Instructions
- Prepare Vehicle: Park your vehicle on a level surface and engage the parking brake. Ensure the engine is running to provide power to the compressor.
- Connect Power: Insert the 12V power cable plug into your vehicle's cigarette lighter socket.
- Access Tyre Valve: Remove the dust cap from the tyre valve.
- Attach Air Hose: Screw the air hose connector firmly onto the tyre valve. Ensure a tight seal to prevent air leakage. The digital display will show the current tyre pressure.
Figure 3: Steps for connecting the compressor to the vehicle's power and the tyre valve.
Operating Instructions
- Set Desired Pressure: Use the '+' and '-' buttons on the unit to adjust the target pressure. The digital display will show the selected pressure. Refer to your vehicle's manual or door jamb sticker for recommended tyre pressures.
- Start Inflation: Press the main power button (often marked with a power symbol) to begin inflation. The compressor will start pumping air, and the display will show the increasing pressure.
- Auto-Stop Function: The TYREinflate 450 features an auto-stop function. It will automatically stop inflating once the preset target pressure is reached.
- Disconnect: Once inflation is complete, press the power button to turn off the unit (if it hasn't auto-stopped), then unscrew the air hose from the tyre valve and replace the dust cap. Disconnect the 12V power cable from the vehicle.
- Using the LED Light: Press the dedicated LED light button to activate the integrated white LED light for illumination in low-light conditions. Press again to turn off.
- Using Adapters: For inflating bicycle tyres, sports balls, or other inflatables, select the appropriate adapter from the included set. Screw the adapter onto the air hose connector before attaching it to the item to be inflated.
Figure 4: Pressure adjustment buttons for setting target inflation.
Figure 5: Dedicated button for activating the LED work light.
Maintenance and Storage
- Cleaning: Wipe the unit with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Cable and Hose Storage: The TYREinflate 450 features integrated storage for its power cable and air hose. Carefully wind the cables into their designated compartments after each use to prevent tangling and damage.
- Adapter Storage: Store the accessory adapters in the designated compartment to prevent loss.
- Storage Location: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures.
Figure 6: Integrated storage for the power cable and air hose on the underside of the unit.
Figure 7: Compartment for storing the various inflation adapters.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor does not turn on. |
|
|
| Tyre not inflating or inflating slowly. |
|
|
| Inaccurate pressure reading. |
|
|
Technical Specifications
| Feature | Detail |
|---|---|
| Model | OSRAM TYREinflate 450 |
| Power Source | 12V DC (via cigarette lighter) |
| Maximum Pressure | 2.41 Bars (35 PSI) |
| Inflation Time (13" tyre) | Approx. 3.5 minutes (from flat to 2.41 bar) |
| Material | Metal |
| Item Weight | 684 Grams |
| Product Dimensions (L x W) | 19.7 cm x 8.8 cm |
| Included Components | OTI450 unit, adapters |
Figure 8: Dimensional drawing of the TYREinflate 450.
Warranty Information
The OSRAM TYREinflate 450 Digital Tyre Pump comes with a 2 Year Manufacturer Guarantee. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty documentation provided with your product or contact OSRAM customer support.
Customer Support
If you encounter any issues or have questions regarding your OSRAM TYREinflate 450 that are not covered in this manual, please contact OSRAM customer support. Contact details can typically be found on the OSRAM official website or on the product packaging.
