CLP Dublin Bar Stool Set (2) - Grey Faux Leather, Adjustable Height

1. Product Overview

The CLP Dublin Bar Stool Set offers a comfortable and stylish seating solution. Each bar stool features a contoured seat upholstered in fine faux leather, complete with armrests and a backrest. The seat is generously padded for enhanced comfort and can swivel 360 degrees, allowing for flexible positioning.

The sturdy chrome-look metal frame and trumpet base provide excellent stability. A gas lift mechanism allows for continuous height adjustment, while the integrated footrest ensures comfortable seating for extended periods. A floor protector is included under the trumpet base to prevent scratches on your flooring. The faux leather upholstery is easy to clean with a damp cotton cloth.

Image 1.1: The CLP Dublin Bar Stool Set in grey faux leather.

2. Safety Information

Important: Please read and follow these safety instructions carefully to ensure safe use of your bar stools.

• Always use the bar stool on a flat, stable surface.
• Ensure the bar stool is stable before sitting on it.
• Avoid sudden movements or excessive leaning to prevent tipping.
• Do not exceed the maximum weight capacity of 110 kg (242 lbs) per bar stool.
• Keep children away from the gas lift mechanism during adjustment to prevent injury.

3. Package Contents

Your CLP Dublin Bar Stool Set package should contain the following components for two bar stools:

• 2 x Seat units (with backrest and armrests)
• 2 x Base plates (trumpet foot)
• 2 x Gas lift cylinders
• 2 x Footrests
• Assembly hardware (screws, washers, Allen key)
• Instruction manual

Please check all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.

4. Assembly Instructions

Assembly typically requires one person and takes approximately 15-30 minutes per stool. No additional tools are usually required beyond what is provided.

1. Attach the Gas Lift to the Base: Carefully insert the wider end of the gas lift cylinder into the central hole of the trumpet base. Ensure it is seated firmly.
2. Install the Footrest: Slide the footrest over the gas lift cylinder. The footrest typically has a screw or clamp mechanism to secure it at the desired height. Tighten any screws to fix it in place.
3. Attach the Seat to the Gas Lift: Align the mounting plate on the underside of the seat unit with the top of the gas lift cylinder. Gently lower the seat onto the gas lift. The seat should click or slide into place. Ensure it is securely attached.
4. Final Check: Before use, ensure all connections are secure and the stool is stable. Test the height adjustment and swivel functions.

Image 4.1: Front view of the assembled bar stool.

5. Operating Instructions

Your CLP Dublin Bar Stool is designed for ease of use with adjustable features.

5.1 Height Adjustment

To adjust the height of the bar stool:

• To raise the seat: Stand up and pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
• To lower the seat: Sit on the stool and pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.

5.2 Swivel Function

The seat of the bar stool can rotate 360 degrees. Simply turn the seat in the desired direction. No lever or button is required for this function.

Image 5.1: Side view illustrating the height adjustment lever.

6. Maintenance and Care

Proper care will extend the life and appearance of your bar stools.

6.1 Faux Leather Upholstery

• For light dirt, wipe with a damp cotton cloth.
• For more stubborn stains, use a mild soap solution on a damp cloth, then wipe clean with a fresh damp cloth and dry thoroughly.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the faux leather.
• Do not expose to direct sunlight for prolonged periods to prevent fading and material degradation.

6.2 Metal Frame and Base

• Wipe the chrome-look metal parts with a soft, dry cloth to remove dust and fingerprints.
• For smudges, use a slightly damp cloth and dry immediately to prevent water spots.
• Avoid abrasive cleaners or steel wool, which can scratch the finish.

6.3 General Care

• Regularly check all screws and connections to ensure they remain tight. Retighten if necessary.
• The floor protector under the base helps prevent scratches. Ensure it remains intact.

Image 6.1: Detail of the tufted backrest upholstery.

Image 6.2: Detail of the tufted seat upholstery.

7. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions:

• Stool feels wobbly: Ensure all assembly screws are tightened. Check that the gas lift is properly seated in both the base and the seat mechanism. Ensure the stool is on a flat, even surface.
• Height adjustment not working: Check if the lever is fully engaged. Ensure there are no obstructions around the gas lift cylinder. If the gas lift is completely unresponsive, it may need replacement.
• Squeaking noises: Apply a small amount of silicone spray to moving parts, such as the gas lift cylinder or swivel mechanism, if accessible.
• Scratches on floor: Verify the floor protector under the base is intact and properly positioned. Replace if damaged.

If problems persist, please contact customer support for further assistance.

8. Specifications

Image 8.1: Back view of the bar stool.

9. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.