Delta Dore Tywatt 5450-6110042 Electrical Consumption Indicator User Manual

1. Introduction

The Delta Dore Tywatt 5450 is an electrical consumption indicator designed to monitor the energy usage of specific electrical installations within your home. This device integrates into your electrical panel and provides real-time and historical consumption data, accessible via the Tydom application on your smartphone.

It is suitable for monitoring various electrical loads such as water heaters, underfloor heating systems, heat pumps, and general power outlets. This manual provides essential information for the safe installation, operation, and maintenance of your Tywatt 5450.

2. Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician in accordance with local electrical codes and regulations. Failure to do so may result in electric shock, fire, or other hazards.

• Always disconnect power to the electrical panel before installation or maintenance.
• Ensure proper grounding and wiring connections.
• Do not operate the device if it appears damaged.
• Keep the device away from water and excessive moisture.
• This device is designed for indoor use only.

3. Package Contents

Verify that all components are present before proceeding with installation:

• 1 x Delta Dore Tywatt 5450 Electrical Consumption Indicator (Model 6110042)

4. Setup and Installation

The Tywatt 5450 is designed for installation within your electrical distribution panel. It requires a Delta Dore Tydom 1.0 or Tydom 2.0 gateway to function correctly and enable connected monitoring.

4.1. Prerequisites

• A Delta Dore Tydom 1.0 or Tydom 2.0 gateway (sold separately).
• Basic electrical knowledge and tools.
• Compliance with local electrical installation standards.

4.2. Installation Steps

1. Power Disconnection: Before beginning any work, ensure the main power supply to your electrical panel is completely disconnected.
2. Mounting: Install the Tywatt 5450 module onto a DIN rail within your electrical panel.
3. Wiring:
   • Connect the Neutral (N) and Live (L) wires to the corresponding terminals on the Tywatt 5450. Refer to the device markings for correct connections (typically N and L inputs).
   • Connect the measurement input (Ti) to the circuit you wish to monitor. This typically involves passing the live wire of the monitored circuit through the current transformer (CT) integrated or connected to the Tywatt 5450.
4. Gateway Connection: Ensure your Tydom gateway is powered on and connected to your home network.
5. Power Restoration: Once all connections are secure and verified, restore power to the electrical panel.
6. Pairing with Tydom: Follow the instructions in your Tydom gateway's manual or the Tydom application to pair the Tywatt 5450. This typically involves a discovery process within the app.

Figure 1: The Delta Dore Tywatt 5450 module, showing the N (Neutral), L (Live), and Ti (Current Transformer input) terminals for electrical connection. The device is designed for DIN rail mounting within an electrical panel.

5. Operating Instructions

Once installed and paired with your Tydom gateway, the Tywatt 5450 will begin monitoring the electrical consumption of the connected circuit. All monitoring and control functions are managed through the Delta Dore Tydom application.

5.1. Accessing Consumption Data

1. Open Tydom App: Launch the Delta Dore Tydom application on your smartphone or tablet.
2. Navigate to Energy Monitoring: Locate the section dedicated to energy consumption or the specific Tywatt 5450 device.
3. View Data: The app will display real-time consumption data. You can also access historical data, typically presented by day, month, or year, allowing you to track trends and identify consumption patterns.

5.2. Monitored Applications

The Tywatt 5450 can monitor various electrical loads, including but not limited to:

• Water heaters
• Underfloor heating systems
• Heat pumps
• General power outlet circuits
• Other high-consumption appliances

The Tydom system also offers expandability for controlling other smart home devices like lighting, heating, and security systems, contributing to overall energy savings and comfort.

6. Maintenance

The Delta Dore Tywatt 5450 is designed for maintenance-free operation. No user-serviceable parts are inside.

• Cleaning: If necessary, gently wipe the exterior of the device with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Inspection: Periodically inspect the device and its wiring for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the official Delta Dore website or contact their customer service directly. Keep your proof of purchase for warranty claims.

Manufacturer: Delta Dore

Website: www.deltadore.com (Please check for your regional website)