Product Overview
This manual provides instructions for the Carrera 1:35 Caterpillar 770 Radio Control Mining Truck. This officially licensed CAT RC vehicle is designed for realistic operation and is suitable for indoor and outdoor use.

Package Contents
- 1 x 1:35 Caterpillar 770 Radio Control Mining Truck
- 1 x Remote Control
- 1 x Instruction Manual
Technical Specifications
- Product Dimensions: 13.78 x 6.89 x 7.48 inches
- Item Weight: 1.14 pounds
- Scale: 1:35
- Frequency: 2.4GHz
- Control Range: Approximately 25 meters
- Truck Batteries: 4 x AAA batteries (not included)
- Remote Control Batteries: 2 x AAA batteries (not included)
- Manufacturer Recommended Age: 8 years and up
Important Safety Information
Please read and understand all safety warnings before operating the product.
- Not suitable for children under 3 years due to small parts.
- Adult supervision is recommended during operation.
- Do not operate near people, pets, or obstacles to prevent injury or damage.
- Keep fingers, hair, and loose clothing away from moving parts.
- Do not modify or disassemble the product.
- Use only recommended batteries and ensure correct polarity during installation.
- Remove batteries from the product and remote control when not in use for extended periods.
Initial Setup
Battery Installation
The mining truck requires 4 AAA batteries. The remote control requires 2 AAA batteries. Batteries are not included.
- Locate the battery compartment on the underside of the mining truck.
- Open the compartment cover and insert 4 AAA batteries, ensuring correct polarity (+/-).
- Securely close the battery compartment cover.
- Locate the battery compartment on the back of the remote control.
- Open the compartment cover and insert 2 AAA batteries, ensuring correct polarity (+/-).
- Securely close the battery compartment cover.

Pairing the Remote Control
Ensure both the mining truck and the remote control have fresh batteries installed and are switched ON. The remote control operates on a 2.4GHz frequency for stable connection. The devices should automatically pair upon activation. If pairing fails, turn both devices OFF and then ON again.
Operating Your Mining Truck
Basic Controls
All functions of the Caterpillar 770 Mining Truck can be controlled remotely via the controller. The control range is approximately 25 meters.
- Forward/Backward: Use the primary joystick/lever on the remote control to move the truck forward or backward.
- Steering: Use the secondary joystick/lever to steer the truck left or right.
- Dump Bed Operation: Activate the designated button or lever on the remote control to raise and lower the truck's dump bed for realistic loading and unloading actions.


Official Product Demonstration Video
This video demonstrates the features and operation of the 1:35 Radio Control Caterpillar 770 Mining Truck, including its movement and dump bed functionality.
Care and Maintenance
- Keep the mining truck and remote control clean and dry. Use a soft, damp cloth to wipe surfaces.
- Remove batteries from both the truck and remote control when not in use for extended periods to prevent leakage and damage.
- Avoid exposing the product to extreme temperatures, direct sunlight, or high humidity.
- Do not immerse the product in water or any other liquids.
- Regularly check for any loose parts or damage. Do not operate if damaged.
Troubleshooting
- Truck not responding to remote control:
- Check battery levels in both the truck and remote control. Replace if low.
- Ensure both the truck and remote control are switched ON.
- Turn both devices OFF and then ON again to re-establish the connection.
- Limited control range:
- Ensure there are no large obstructions (walls, furniture) between the remote control and the truck.
- Check battery levels in both devices.
- Slow or weak movement:
- Replace the batteries in the truck with fresh ones.
- Ensure the truck is operating on a smooth, flat surface.
Warranty and Customer Support
For detailed warranty information, product registration, or technical assistance, please visit the official Carrera website or contact their customer support department. Keep your purchase receipt as proof of purchase.





