1. Introduction and Key Features
This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your Teka MasterSense 60 cm Induction Hob. Please read this manual thoroughly before using the appliance and keep it for future reference.
Figure 1: Overview of the Teka MasterSense 60 cm Induction Hob.
1.1 Key Features
- Beveled Front Glass: The hob features a sleek beveled front edge, enhancing its aesthetic appeal and making cleaning easier.
Image: Close-up of the hob's beveled front glass edge.
- Touch Control Multislider: Intuitive control for precise temperature adjustments and function selection.
- 8 Direct Functions: Pre-set cooking functions including Grill, Frying, Iron, Cook, Trust, Slow Fire, Melt, and Keep Warm.
- Power Plus Function: Provides an extra power boost for rapid heating.
- STOP & GO Function: Allows pausing and resuming cooking with previous settings.
- 4 Cooking Zones (4 + Synchro): Flexible cooking areas, including a Synchro zone for larger cookware.
- Safety Lock: Child lock feature for enhanced safety.
2. Safety Information
Always adhere to the following safety precautions to prevent personal injury or damage to the appliance.
- Ensure the appliance is installed by a qualified technician in accordance with local regulations.
- Do not touch hot surfaces. Use oven mitts or pot holders.
- Keep children away from the appliance during operation.
- Do not store flammable materials on or near the hob.
- Disconnect the appliance from the power supply before cleaning or maintenance.
- Only use induction-compatible cookware.
3. Setup and Installation
3.1 Unpacking
Carefully remove the hob from its packaging. Inspect for any damage. Retain packaging for potential future transport or service.
3.2 Dimensions and Cut-out
The hob requires a specific cut-out in your countertop for proper installation. Refer to the diagram below for precise measurements.
Figure 2: General dimensions of the hob and required countertop cut-out. Hob dimensions (Height x Width x Depth): 5.3 x 60 x 51 cm. Cut-out dimensions: 56 x 49 cm.
3.3 Electrical Connection
This appliance must be connected to a 240 Volt power supply. The electrical connection should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.
4. Operating Instructions
4.1 Control Panel - Touch Control Multislider
The hob features a Touch Control Multislider for precise temperature and function selection. Simply slide your finger along the control bar to adjust the power level or select a direct function.
Figure 3: Close-up of the Touch Control Multislider and digital display.
4.2 Cooking Zones
The hob is equipped with 4 cooking zones, including a Synchro function for combining two zones into one large cooking area, offering greater flexibility for larger cookware.
Figure 4: Top view of the hob showing the four cooking zones.
4.3 Direct Functions
The MasterSense hob includes 8 direct functions for optimized cooking results:
- Grill: Ideal for grilling meats and vegetables.
Image: Food grilling on a pan.
- Frying: Perfect for pan-frying various dishes.
Image: Chicken frying in a pan.
- Iron: For cooking with cast iron or heavy-bottomed pans.
- Cook: Standard cooking setting for general use.
Image: Pasta being added to a pot on the hob.
- Trust: A specific function for delicate cooking processes.
- Slow Fire: For simmering and slow cooking.
Image: Steam rising from a pot on the hob, indicating simmering.
- Melt: Gentle heat for melting butter, chocolate, etc.
- Keep Warm: Maintains food at a serving temperature.
4.4 Power Plus Function
The Power Plus function provides an extra boost of power to a selected cooking zone for rapid heating, ideal for boiling water quickly.
4.5 STOP & GO Function
The STOP & GO function allows you to pause cooking on all active zones and resume with the same settings later. This is convenient for temporary interruptions during cooking.
5. Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your induction hob.
- Always ensure the hob is cool and disconnected from the power supply before cleaning.
- Wipe the ceramic glass surface with a soft cloth and a mild detergent after each use.
- For stubborn stains, use a specialized ceramic hob cleaner and a scraper designed for glass surfaces.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals as they can damage the surface.
- Clean the control panel gently with a damp cloth.
6. Troubleshooting
If you encounter any issues with your hob, refer to the following table for common problems and their solutions. If the problem persists, contact authorized service personnel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hob does not turn on. | No power supply; safety lock activated. | Check power connection; deactivate child lock (refer to section 4.1). |
| Cooking zone not heating. | Incorrect cookware; pan not centered. | Use induction-compatible cookware; reposition pan centrally on the zone. |
| Display shows an error code. | Internal fault; overheating. | Turn off the hob, wait a few minutes, then restart. If error persists, contact service. |
| Unusual noise during operation. | Normal fan operation; cookware vibration. | Some noise from the cooling fan is normal. Check if cookware is vibrating; this is common with certain types of induction cookware. |
7. Specifications
Detailed technical specifications for the Teka MasterSense Induction Hob.
| Feature | Detail |
|---|---|
| Brand | Teka |
| Model | 112500022 |
| Product Dimensions (H x W x D) | 5.3 x 60 x 51 cm |
| Weight | 10.7 kg |
| Installation Type | Self-sufficient hob |
| Special Features | Safety Lock, Touch Control Multislider |
| Burner Type | Ceramic (Induction) |
| Number of Heating Elements | 4 (including Synchro function) |
| Color | Black |
| Voltage | 240 Volts |
| Wattage | 5.76E+4 W |
| Surface Material | Glass |
| Energy Efficiency Class | A+ |
Figure 5: Energy efficiency label for the hob, showing A+ rating and 43 kWh/annum consumption.
8. Warranty and Support
Your Teka MasterSense Induction Hob comes with a 3-year manufacturer's warranty, ensuring peace of mind regarding product quality and performance.
Image: Icon indicating a 3-year warranty.
For technical support, service requests, or warranty claims, please contact your local Teka authorized service center or visit the official Teka website for contact information.
Teka is committed to quality and innovation, with products designed to integrate seamlessly into your home. This product benefits from German technology and design excellence, recognized by awards such as the Red Dot Design Award.
Images: Icons for German Technology and Red Dot Design Award.
