Introduction
This manual provides essential information for the safe and effective use of your Hitachi RMH-F850B Men's Shaver. Please read it thoroughly before using the product and keep it for future reference.

Image: The Hitachi RMH-F850B Men's Shaver in dark brown, shown with its accompanying travel pouch.
Product Features
- Stainless Steel 4-Blade System: Equipped with outer and inner blades made of durable stainless steel for superior sharpness and longevity, ensuring a smooth and fast shave.
- 3D Head: The shaver features a 3D head that moves front, back, left, right, up, and down, adapting gently to the contours of your face for a close and comfortable shave.
- Foam Shaving Compatible: Designed to be used with shaving foam or facial cleanser for a comfortable foam shave.
- Washable Body: The main unit and blades are washable under running water for easy and hygienic cleaning.
- Travel Pouch Included: Comes with a convenient shaver pouch, ideal for business trips and travel.

Image: The Hitachi RMH-F850B S-blade shaver, highlighting its stainless steel 4-blade system and 3D head for a smooth and fast shave.

Image: A detailed view of the shaver's stainless steel 4-blade system, illustrating the independent float mechanism where each blade adjusts to skin contours.

Image: Illustration of the 3D head movement of the Hitachi RMH-F850B shaver, showing its ability to move 8° left/right, 12° front/back, and 2.5mm up/down for a gentle fit to the skin.
Setup
Charging the Shaver
- Ensure the shaver is turned off.
- Connect the power adapter to the shaver and then plug it into an AC outlet (AC100-240V compatible).
- The charging indicator lamp will illuminate. A full charge takes approximately 5 hours.
- Once fully charged, the shaver can be used for approximately 15 days (based on 3 minutes of use per day).
- Do not connect the power adapter in wet areas like bathrooms or places with high humidity.
Initial Cleaning
Before first use, it is recommended to rinse the shaver head under running water to remove any manufacturing residues. Ensure the shaver is disconnected from the power adapter before cleaning.
Operating Instructions
Basic Shaving
- Press the power button to turn on the shaver.
- Hold the shaver at a right angle to your skin and move it gently against the direction of hair growth.
- Do not press too hard, as the 3D head is designed to follow your facial contours with light pressure.
- After shaving, press the power button to turn off the shaver.
Foam Shaving
The RMH-F850B supports foam shaving for a more comfortable experience.
- Apply shaving foam or a suitable facial cleanser to your face.
- Turn on the shaver and proceed with shaving as described in the basic shaving steps.
- Important: To prevent clogging, avoid facial cleansers containing scrubs, solid soaps, or cream/gel-type shaving agents.

Image: A man demonstrating foam shaving with the Hitachi RMH-F850B shaver, illustrating its compatibility with shaving foam.
Maintenance
Cleaning the Shaver
Regular cleaning ensures optimal performance and hygiene.
- After each use, turn off the shaver and disconnect it from any power source.
- Remove the outer foil frame.
- Rinse the outer foil and inner blades thoroughly under running water to remove hair clippings and any soap residue (if foam shaving).
- Use the included cleaning brush to remove stubborn hair from the blades and shaver body.
- Shake off excess water and allow the shaver to air dry completely before reassembling or storing.
- Apply a drop of the included shaver oil to the blades periodically to maintain their sharpness and smooth operation.
Blade Replacement
For continued optimal shaving performance, replace the outer foil and inner blades when they become dull or damaged.
- Replacement Outer Blade: K-NS1
- Replacement Inner Blade: K-NU1
Refer to the detailed instructions in the included instruction manual for specific blade replacement procedures.
Troubleshooting
If you encounter any issues with your Hitachi RMH-F850B shaver, please refer to the following common solutions:
- Shaver not turning on: Ensure the shaver is fully charged. If the charging reminder lamp is flashing, recharge the unit.
- Poor shaving performance: Clean the blades thoroughly. If performance does not improve, consider replacing the outer foil and inner blades.
- Unusual noise: Clean the shaver head and ensure no hair or debris is obstructing the blades. If the noise persists, the blades might be damaged and require replacement.
For issues not covered here, please consult the full instruction manual or contact Hitachi customer support.
Specifications

Image: A visual summary of the Hitachi RMH-F850B shaver's key specifications and features, including size, weight, charging time, and accessories.
| Feature | Detail |
|---|---|
| Model Name | RMH-F850B (S-blade) |
| Color | Dark Brown |
| Manufacturer | Hitachi |
| Head Type | Reciprocating |
| Blade Material | Stainless Steel |
| Power Source | Battery Operated (Rechargeable) |
| Battery Type | Ni-MH Nickel-metal hydride battery |
| Charging Time | Approx. 5 hours |
| Battery Life | Approx. 15 days (3 minutes/day) |
| Power Consumption | 7W (during AC operation) |
| Body Size (W x H x D) | 6.4 x 16.6 x 5.2 cm |
| Product Weight | Approx. 196 g |
| Waterproof Structure | IPX7 standard (main unit only) |
| Household Washing | Washable body, cleaning with included brush |
| Included Components | Power adapter, shaver oil, cleaning brush, shaver pouch, warranty card, instruction manual |
| Replacement Outer Blade | K-NS1 |
| Replacement Inner Blade | K-NU1 |
Warranty and Support
Your Hitachi RMH-F850B shaver comes with a warranty. Please refer to the included warranty card for details regarding coverage and terms.
For further assistance, technical support, or inquiries about replacement parts, please consult the comprehensive instruction manual provided with your product or visit the official Hitachi website for customer service contact information.