FrSky Taranis X9D Plus 2019

Download PDF
Contents

FrSky Taranis X9D Plus 2019 Transmitter User Manual

Model: Taranis X9D Plus 2019

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your FrSky Taranis X9D Plus 2019 Transmitter. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage or injury. The Taranis X9D Plus 2019 is a re-designed version of the classic Taranis remote control, featuring the latest ACCESS communication protocol, an upgraded MCU, and enhanced capabilities for RC enthusiasts.

2. Safety Information

Always operate your transmitter in a safe and responsible manner. Failure to follow safety guidelines can result in serious injury or property damage.

  • Ensure the transmitter battery is fully charged before each use.
  • Always perform a range check before flying any model.
  • Never operate your RC model near people, animals, or property.
  • Avoid operating in adverse weather conditions (e.g., strong winds, rain).
  • Keep the transmitter away from water and extreme temperatures.
  • Do not attempt to modify or disassemble the transmitter.

3. Product Overview

The FrSky Taranis X9D Plus 2019 Transmitter is a powerful and versatile radio control system. Familiarize yourself with its key components.

FrSky Taranis X9D Plus 2019 Transmitter front view

Figure 3.1: Front view of the FrSky Taranis X9D Plus 2019 Transmitter, showing the gimbals, switches, LCD screen, and navigation buttons.

Key Features:

  • Classic Taranis form factor design
  • Easy launch momentary button (top left shoulder)
  • Program navigation wheel for menu navigation
  • High-speed module digital interface
  • Installed with ACCESS protocol (24 channels, faster baud rate, lower latency)
  • Supports spectrum analyzer function
  • Supports SWR indicator warning
  • G9D potentiometer gimbals
  • Haptic vibration alerts and voice speech outputs
  • Supports wired training function

4. Setup

4.1 Battery Installation and Charging

The Taranis X9D Plus 2019 requires a 2S Li-battery. Ensure the battery is properly installed and charged before first use.

2S Li-battery for FrSky Taranis X9D Plus 2019

Figure 4.1: Example of a 2S Li-battery compatible with the FrSky Taranis X9D Plus 2019 Transmitter.

  1. Open the battery compartment cover on the back of the transmitter.
  2. Carefully connect the 2S Li-battery to the designated connector inside the compartment. Ensure correct polarity.
  3. Close the battery compartment cover.
  4. To charge the battery, connect the transmitter to a USB power source using the Mini USB interface. The transmitter supports 2S Li-battery balancing charge via this port.
  5. Monitor the charging indicator on the transmitter's screen.

4.2 Initial Power On and Firmware Update

The transmitter may require a firmware update for optimal performance and to ensure compatibility with the latest features and receivers.

  1. To power on, press and hold the power button for approximately 4 seconds until the transmitter vibrates and the screen illuminates.
  2. The Taranis X9D Plus 2019 runs on OpenTX firmware. It is highly recommended to update the firmware to the latest version using the OpenTX Companion software on a computer.
  3. To enter bootloader mode for firmware updates, hold the two horizontal trim switches towards the center, then briefly press the power button twice. Connect the transmitter to your computer via USB.
  4. Follow the instructions provided by the OpenTX Companion software to download and flash the radio's firmware.
  5. After flashing, boot the radio with the new firmware and then flash the same firmware again from an SD card to ensure the EEPROM and bootloader are updated.

5. Operating the Transmitter

5.1 Basic Navigation and Controls

The Taranis X9D Plus 2019 features a program scroll wheel and various buttons for navigating menus and controlling functions.

  • Scroll Wheel: Used for navigating through menus and adjusting values.
  • MENU Button: Accesses the main menu.
  • PAGE Button: Switches between different pages within a menu.
  • EXIT Button: Returns to the previous screen or exits a menu.
  • Gimbals: Control the primary flight surfaces (e.g., aileron, elevator, rudder, throttle).
  • Switches: Assignable switches for various functions (e.g., flight modes, gear, flaps).
  • Momentary Button: Located on the top left shoulder, useful for specific functions like DLG launch mode.

5.2 Model Setup and Binding

To control an RC model, you must first create a model profile and bind the transmitter to the receiver.

  1. From the main screen, use the scroll wheel to navigate to the Model Select screen.
  2. Create a new model or select an existing one.
  3. Access the Model Setup menu to configure settings such as internal/external RF module, protocol (ACCESS, ACCST D16), and channel range.
  4. Initiate the binding process on the transmitter.
  5. Put your receiver into binding mode (refer to your receiver's manual for specific instructions).
  6. Once bound, verify control surface movement and functionality.

5.3 Advanced Features (OpenTX)

The OpenTX operating system offers extensive customization and advanced features.

  • Mixer: Configure how stick inputs affect control surfaces.
  • Special Functions: Assign custom actions to switches, such as voice alerts, timers, or logical switches.
  • Telemetry: Monitor real-time data from your model (e.g., battery voltage, RSSI) if your receiver supports telemetry.
  • LUA Scripts: Extend functionality with custom LUA scripts for specific applications or displays.
  • Spectrum Analyzer: Use this function to check for RF noise in your operating environment.

6. Maintenance

Proper maintenance ensures the longevity and reliability of your FrSky Taranis X9D Plus 2019 Transmitter.

  • Keep the transmitter clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Regularly check all switches, gimbals, and buttons for proper function and smooth operation.
  • Ensure the antenna is securely attached and not damaged.
  • Periodically check for and install the latest OpenTX firmware updates.
  • If storing for an extended period, ensure the battery is charged to a storage voltage (typically around 3.8V per cell for LiPo batteries) to prevent degradation.

7. Troubleshooting

This section addresses common issues you might encounter with your transmitter.

ProblemPossible CauseSolution
Transmitter does not power on.Battery is not charged or not connected properly.Charge the battery. Ensure the battery is correctly installed and connected.
Cannot bind to receiver.Incorrect protocol selected (ACCESS vs. ACCST D16); receiver not in bind mode; transmitter firmware outdated.Verify the correct protocol in model setup. Ensure receiver is in bind mode. Update transmitter firmware.
No control response from model.Not bound; receiver power issue; incorrect model selected.Re-bind the transmitter and receiver. Check receiver power supply. Ensure the correct model profile is active on the transmitter.
Gimbal or switch not responding.Physical damage; calibration issue; software misconfiguration.Inspect for damage. Recalibrate gimbals in OpenTX. Check mixer and special function settings.

8. Specifications

Detailed technical specifications for the FrSky Taranis X9D Plus 2019 Transmitter.

  • Dimension: 200*194*110mm (L*W*H)
  • Weight: 670g
  • Operating System: OpenTX
  • Number of Channels: 24 channels
  • Internal RF Module: ISRM-S-X9
  • Operating Voltage Range: 6.5 - 8.4V
  • Operating Temperature: -10℃ ~ 60℃ (14℉ ~ 140℉)
  • Backlit LCD Resolution: 212*64
  • Ports: Smart Port, Micro SD card slot, DSC Port, Mini USB interface (supports 2S Li-battery balancing charge)
  • Model Memories: 60 models (expandable by Micro SD card)
  • Compatibility: ACCST D16 and ACCESS receivers

9. Warranty and Support

For warranty information and technical support, please refer to the official FrSky website or contact your authorized dealer.

  • Official FrSky Website: www.frsky-rc.com
  • OpenTX Community: For OpenTX related questions and resources, visit the official OpenTX website or forums.
  • Customer Service: Contact your point of purchase for direct support regarding your product.

© 2024 FrSky. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.