NEWONE HT8501 Small Cordless Leaf Blower User Manual

1. Introduction

Thank you for choosing the NEWONE HT8501 Small Cordless Leaf Blower. This versatile 3-in-1 tool is designed for efficient outdoor and indoor cleaning, offering blowing, vacuuming, and inflation/deflation functions. Its lightweight and cordless design provides convenience and ease of use for various tasks.

Image 1.1: NEWONE HT8501 Small Cordless Leaf Blower and included accessories.

2. Safety Information

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating the tool.

• Wear appropriate personal protective equipment (PPE) such as safety glasses and hearing protection.
• Keep children and bystanders away while operating the tool.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the battery is fully charged before use and removed when not in use or during maintenance.
• Do not block air vents during operation.

3. Product Overview & Components

The NEWONE HT8501 features a compact design with multiple functionalities. Familiarize yourself with its main components:

1. Air Outlet Interface
2. Air Duct
3. Two-Stage Air Speed Switch
4. Anti-Skid Handle
5. Air Intake
6. Battery Pack (20V)
7. Blower Nozzles (straight and curved)
8. Dust Collection Bag
9. Inflation/Deflation Adapter Nozzles

Image 3.1: Key components of the NEWONE HT8501 blower.

4. Setup

4.1. Battery Charging and Installation

• Ensure the battery is fully charged using the provided charger before first use. The power indicator lights will show the battery level.
• Slide the charged battery pack into the base of the blower handle until it clicks securely into place.

4.2. Attaching Blower Nozzles

• For blowing tasks, select either the straight or curved blower nozzle.
• Align the chosen nozzle with the air outlet interface (1) and twist to secure it.

Image 4.1: Securely attach the blower nozzle.

4.3. Converting to Vacuum Function

• Remove any attached blower nozzle.
• Attach the dust collection bag to the air outlet interface (1).
• Attach a blower nozzle to the air intake (5) to serve as the vacuum intake.

Image 4.2: Illustration of the blow-suction function setup.

4.4. Converting to Inflation/Deflation Function

• For inflation, attach the desired adapter nozzle to the air outlet interface (1).
• For deflation, attach the desired adapter nozzle to the air intake (5).

Image 4.3: Using the tool for inflation.

5. Operating Instructions

5.1. Powering On/Off and Speed Selection

• The tool features a two-stage speed selection switch (3) on the handle.
• Slide the switch to position '1' for lower speed or '2' for higher speed.
• To turn off, slide the switch to position '0'.

Image 5.1: Two-speed selection switch for operation.

5.2. Using the Blower Function

• With the desired blower nozzle attached, select the appropriate speed.
• Direct the nozzle towards the area to be cleared. This tool is ideal for small amounts of leaves, dust, and debris in courtyards, garages, or car interiors.
• Avoid attempting to clear large piles of wet leaves, as this tool is designed for lighter tasks.

Image 5.2: The blower is effective for small debris, not large accumulations.

5.3. Using the Vacuum Function

• Ensure the dust collection bag is attached to the air outlet and a nozzle is on the air intake.
• Turn on the tool and move the intake nozzle over the debris to be collected. This is suitable for dust, pet hair, and small crumbs.

Image 5.3: The tool in vacuum mode, collecting debris.

5.4. Using the Inflation/Deflation Function

• Attach the appropriate adapter nozzle for inflation or deflation.
• For inflation, connect the nozzle to the item and turn on the tool.
• For deflation, connect the nozzle to the item's air intake and turn on the tool.

Image 5.4: Inflation function in use.

5.5. Official Product Videos

6. Maintenance

• Cleaning: Regularly clean the air intake and outlet to prevent blockages. Use a soft, dry cloth to wipe down the tool.
• Battery Care: Store the battery in a cool, dry place away from direct sunlight. Do not expose the battery to extreme temperatures.
• Storage: Store the tool and its accessories in a dry, secure location, out of reach of children.

7. Troubleshooting

• Tool not turning on: Ensure the battery is fully charged and properly installed. Check the power switch position.
• Reduced performance: Check for any blockages in the air intake or outlet. Ensure the battery is adequately charged.
• Battery not charging: Verify the charger is correctly plugged into a working outlet and the battery is properly seated in the charger.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the product packaging or contact NEWONE customer service directly. Keep your purchase receipt as proof of purchase.