PowerA Dual Charging Station for Xbox Series X|S and Xbox One Wireless Controllers

Introduction

This manual provides instructions for the PowerA Dual Charging Station, designed to charge and store two Xbox Series X|S or Xbox One wireless controllers. It includes two rechargeable battery packs and four battery doors for compatibility with both controller types. The station is powered by an AC adapter, freeing up USB ports on your console.

What's in the Box

• PowerA Dual Charging Station
• Two 1100mAh Rechargeable Battery Packs
• Two Battery Doors for Xbox Series X|S Controllers
• Two Battery Doors for Xbox One Controllers
• AC Adapter

Image: The PowerA Dual Charging Station, two rechargeable battery packs, and four controller battery doors (two for Xbox Series X|S and two for Xbox One).

Setup

1. Installing the Rechargeable Battery Packs

1. Remove the existing battery cover and any batteries from your Xbox wireless controller.
2. Select the appropriate battery door for your controller model (Xbox Series X|S or Xbox One).
3. Insert one of the provided 1100mAh rechargeable battery packs into the controller's battery compartment, ensuring the contacts align correctly.
4. Attach the selected battery door over the battery pack until it clicks securely into place.

Image: Two 1100mAh rechargeable battery packs.

2. Connecting the Charging Station

1. Place the charging station on a flat, stable surface.
2. Connect the AC adapter to the power input port on the back of the charging station.
3. Plug the AC adapter into a standard wall outlet.

Operating Instructions

Charging Controllers

1. With the rechargeable battery pack installed in your controller, gently place the controller onto one of the charging slots on the station. Ensure the controller snaps down securely into position.
2. The LED indicator light on the charging station will illuminate amber to indicate that the controller is charging.
3. Once the controller is fully charged, the LED indicator light will change to white.
4. To remove a charged controller, simply lift it from the charging slot.

Note: The charging station allows for convenient storage of controllers when not in use, even if they are fully charged.

Image: Two Xbox controllers charging on the PowerA Dual Charging Station.

Maintenance

• Keep the charging station and controllers clean by wiping them with a dry, soft cloth.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble or modify the charging station or battery packs.
• Ensure the charging contacts on both the station and the battery packs remain free of dust and debris for optimal charging performance.

Troubleshooting

Controller not charging:

Ensure the controller is properly seated on the charging station. The LED indicator should be amber. If not, gently adjust the controller until the light appears. Verify the AC adapter is securely connected to both the station and the wall outlet. Check that the rechargeable battery pack is correctly installed in the controller and that the battery door is fully closed.

Short battery life:

Battery life can vary based on usage patterns and game intensity. Ensure batteries are fully charged (LED is white) before use. Over time, rechargeable batteries may experience reduced capacity. If battery life significantly diminishes, consider replacing the rechargeable battery packs.

LED indicator not working:

Confirm the charging station is powered on and the AC adapter is connected. If the issue persists, try a different power outlet. If only one side's LED is affected, try swapping controllers to determine if the issue is with the controller or the charging slot.

Specifications

Warranty and Support

This PowerA product is covered by a two-year limited warranty. For detailed warranty information and support, please visit the official PowerA website at PowerA.com/Support.

Manufacturer: PowerA