Kenwood Ceramic Steam Iron STP70.000WG User Manual

1. Introduction

Thank you for purchasing the Kenwood Ceramic Steam Iron STP70.000WG. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.

This image displays the Kenwood Ceramic Steam Iron model STP70.000WG. The iron is predominantly white with vibrant green accents on the handle, water tank, and control buttons. Visible features include the ceramic soleplate, the transparent 350ml water tank, the temperature control dial, and buttons for steam and spray functions. The power cord is visible extending from the rear of the iron.

2. Safety Instructions

• Always ensure the voltage indicated on the rating label corresponds to your mains voltage.
• Do not immerse the iron, cord, or plug in water or any other liquid.
• Unplug the iron from the mains socket when filling with water, emptying, or when not in use.
• Keep the iron and its cord out of reach of children.
• Do not leave the iron unattended while it is switched on or connected to the mains supply.
• Place the iron on a stable, heat-resistant surface when resting.
• Do not operate the iron with a damaged cord or plug. Contact qualified service personnel for repair.
• Use the iron only for its intended household purpose.
• Exercise caution when handling hot surfaces and steam.

3. Product Features

• High Power: 2600 Watts for rapid heating and efficient ironing.
• Large Water Tank: 350ml capacity for extended ironing sessions without frequent refills.
• Ceramic Soleplate: Provides smooth gliding over fabrics and even heat distribution.
• Eco-friendly Function: Designed for energy efficiency.
• Variable Steam Output: Steam power ranging from 45g/min to 140g/min for different fabric types.
• Anti-Drip System: Prevents water stains on garments, even at low temperatures.
• Self-Clean Function: Helps remove mineral deposits and maintain performance.

4. Setup

1. Unpacking: Carefully remove the iron from its packaging. Retain the packaging for storage or future transport.
2. First Use: Before first use, iron an old piece of fabric to remove any manufacturing residues from the soleplate. A slight odor or smoke may occur, which is normal and will dissipate.
3. Filling the Water Tank:
   • Ensure the iron is unplugged from the power outlet.
   • Open the water tank filler cap.
   • Fill the tank with clean tap water up to the 'MAX' indicator. Do not overfill.
   • Close the filler cap securely.

5. Operating Instructions

5.1. Temperature Setting

1. Plug the iron into a suitable power outlet.
2. Turn the temperature control dial to the desired setting based on the fabric type. Refer to the fabric care labels on your garments.
3. The indicator light will illuminate, indicating the iron is heating. It will turn off when the set temperature is reached.

5.2. Dry Ironing

For dry ironing, ensure the steam control is set to the '0' (no steam) position. Iron garments as usual, adjusting the temperature according to the fabric.

5.3. Steam Ironing

Steam ironing is suitable for most fabrics except synthetics and silk. Ensure the water tank is filled and the temperature dial is set to the steam zone (usually between two and three dots or 'MAX').

1. Once the iron reaches the set temperature (indicator light off), adjust the steam control to the desired steam level.
2. Move the iron over the fabric. Steam will be continuously released from the soleplate.

5.4. Steam Shot / Vertical Steam

For stubborn creases or vertical steaming of hanging garments, press the steam shot button. Allow a few seconds between shots for steam to regenerate.

5.5. Spray Function

Press the spray button to lightly moisten fabrics, which helps in removing wrinkles. This function can be used with or without steam.

6. Maintenance

6.1. Cleaning the Soleplate

• Allow the iron to cool completely.
• Wipe the soleplate with a damp cloth and a non-abrasive cleaner if necessary.
• Do not use abrasive scourers or chemical cleaners as they can damage the soleplate.

6.2. Self-Clean Function

1. Fill the water tank to the MAX level.
2. Set the temperature dial to MAX and plug in the iron.
3. Once the indicator light turns off, unplug the iron.
4. Hold the iron horizontally over a sink.
5. Press and hold the self-clean button. Hot water and steam will be expelled from the soleplate, flushing out mineral deposits.
6. Gently rock the iron back and forth until the water tank is empty.
7. Plug the iron back in and heat it to dry the soleplate.
8. Unplug and store once cool. Perform this function monthly or as needed.

6.3. Storage

After use, unplug the iron and allow it to cool completely. Empty any remaining water from the tank. Store the iron upright on its heel rest in a safe, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This Kenwood Ceramic Steam Iron STP70.000WG comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Kenwood customer support. Contact details can typically be found on the Kenwood official website or on your product packaging.