1. Introduction
Thank you for choosing the Music Sound Basic Bluetooth Headphones. This manual provides essential information for the safe and efficient use of your new headphones. Please read it thoroughly before use and retain it for future reference.
2. Safety Information
- Volume Control: To prevent hearing damage, do not listen at high volume levels for extended periods.
- Charging: Use only the provided charging cable or a certified equivalent. Do not attempt to charge the headphones with damaged cables or in wet conditions.
- Water Resistance: The headphones are water-resistant. Avoid submerging them in water or exposing them to heavy rain.
- Disassembly: Do not attempt to disassemble, repair, or modify the headphones. This will void the warranty and may cause damage.
- Disposal: Dispose of the product and its battery responsibly according to local regulations.
3. Package Contents
Ensure all items are present in the package:
- Music Sound Basic Bluetooth Headphones
- USB Charging Cable
- 3.5mm AUX Audio Cable
- User Manual
4. Product Overview
Familiarize yourself with the components of your headphones.

Figure 4.1: Front view of the Music Sound Basic Bluetooth Headphones, showcasing the over-ear design and branding on the earcup.

Figure 4.2: Top view of the headphones, illustrating the adjustable headband for a comfortable fit.

Figure 4.3: Close-up of the earcup, highlighting the integrated keypad controls for easy operation.

Figure 4.4: Image emphasizing the extended battery life, providing up to 14 hours of music playback on a single charge.

Figure 4.5: A user wearing the headphones, demonstrating the around-ear design for immersive sound and comfort.
5. Setup
5.1 Charging the Headphones
- Connect the USB charging cable to the charging port on the headphones.
- Connect the other end of the USB cable to a compatible USB power source (e.g., computer, wall adapter).
- The LED indicator will illuminate during charging.
- Charging typically takes approximately 2 hours for a full charge. The LED indicator will change or turn off once charging is complete.
5.2 Bluetooth Pairing
- Ensure the headphones are fully charged.
- Press and hold the Power button on the headphones until the LED indicator flashes, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Music Sound Basic" or similar from the list of devices.
- Once paired, the LED indicator will stop flashing and remain solid or turn off, depending on the model.
5.3 AUX Connection
For wired listening, use the 3.5mm AUX audio cable:
- Connect one end of the 3.5mm AUX cable to the AUX input on the headphones.
- Connect the other end to the 3.5mm audio output of your device.
- The headphones will automatically switch to wired mode. Bluetooth functionality will be disabled.
6. Operating Instructions
6.1 Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds.
- Power Off: Press and hold the Power button for approximately 3-5 seconds.
6.2 Music Playback
- Play/Pause: Press the Play/Pause button once.
- Next Track: Press the 'Next' button (usually labeled with a forward arrow or '+') once.
- Previous Track: Press the 'Previous' button (usually labeled with a backward arrow or '-') once.
6.3 Volume Control
- Volume Up: Press and hold the 'Next' button or a dedicated Volume Up button.
- Volume Down: Press and hold the 'Previous' button or a dedicated Volume Down button.
6.4 Call Management
- Answer/End Call: Press the Play/Pause button once.
- Reject Call: Press and hold the Play/Pause button for 2 seconds.
- Redial Last Number: Double-press the Play/Pause button.
6.5 LED Indicator Meanings
- Solid Red: Charging.
- Red Off/Blue Solid: Fully charged (may vary by model).
- Flashing Blue/Red: Pairing mode.
- Slow Flashing Blue: Connected/Playing music.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
- Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the headphones regularly, even if not in frequent use. Avoid fully discharging the battery often.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones for at least 30 minutes. |
| Cannot pair via Bluetooth. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing LED). Turn device Bluetooth off and on. Move headphones closer to the device (within 10 meters). |
| No sound or low volume. | Volume too low on headphones or device; incorrect audio source; loose AUX cable. | Increase volume on both headphones and device. Check if the correct audio source is selected on your device. Ensure AUX cable is securely connected. |
| Short battery life. | Not fully charged; aging battery. | Ensure headphones are fully charged (2 hours). Battery performance may degrade over time. |
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | BTHEADBBASICMSK |
| Color | Black |
| Ear Placement | Over-Ear |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Range | Up to 10 meters |
| Headphone Jack | 3.5 mm Jack (for wired connection) |
| Noise Control | None |
| Battery Life | Up to 14 hours |
| Battery Charge Time | Approximately 2 hours |
| Frequency Range | 20 Hz - 20,000 Hz |
| Audio Driver Type | Dynamic Driver |
| Special Features | Integrated Microphone |
| Material | Plastic |
| Water Resistance Level | Water Resistant |
| Compatible Devices | Laptops, Desktop Computers, Tablets, Mobile Phones, Televisions, Smart Speakers, Car Audio Systems, Digital Video Game Consoles |
10. Warranty and Support
Your Music Sound Basic Bluetooth Headphones come with a 2-year warranty from the date of purchase, covering manufacturing defects.
For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Music Sound website.
Please retain your proof of purchase for warranty purposes.