Losi RC Truck 1/18 Mini-T 2.0 Brushless RTR Instruction Manual

1. Introduction and Safety Guidelines

This manual provides essential information for the safe and correct operation, setup, and maintenance of your Losi 1/18 Mini-T 2.0 2WD Stadium Truck Brushless RTR. Please read the entire instruction manual thoroughly before operating the product. Failure to operate the product correctly can result in damage to the product, personal property, and may cause serious injury.

This is a sophisticated hobby product requiring caution, common sense, and basic mechanical ability. It is not intended for use by children without adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC.

Key Features:

• Scaled-down version of the 1/10th 22T
• Brushless 2-in-1 motor/ESC configuration
• Dynamite 7.4V 2S 800mAh 50C LiPo Battery
• Waterproof electronics
• Fully assembled and ready-to-run with no additional items needed

Figure 1: Losi 1/18 Mini-T 2.0 2WD Stadium Truck Brushless RTR (Red)

2. What's in the Box

Your Losi Mini-T 2.0 RTR Truck comes with the following components:

• (1) Losi 1/18 Mini-T 2.0 RTR Truck
• (1) Horizon 2.4Ghz Receiver WP 3-CH
• (1) Dynamite BL Motor/ESC 2-in-1 6000Kv
• (1) Spektrum SX107 Micro Metal Gear Servo
• (1) Dynamite 7.4V 800mAh 2S 50C LiPo Hardcase: EC2
• (1) Dynamite USB 2S LiPo Charger
• (4) AAA Batteries (for transmitter)
• (1) Horizon 3-CH 2.4Ghz Transmitter

3. Setup

3.1 Battery Charging

Use the included Dynamite USB 2S LiPo Charger to charge the Dynamite 7.4V 800mAh 2S 50C LiPo battery. Ensure you use a compatible USB power supply (not included) for charging.

Figure 2: A USB Power Supply is required for charging the battery.

3.2 Transmitter Batteries

Install the four (4) AAA batteries into the Horizon 3-CH 2.4Ghz Transmitter.

3.3 Installing Battery in Truck

Securely place the charged LiPo battery into the truck's battery tray and fasten it with the Velcro strap. The truck features a sliding motor mount for changing pinion sizes and a larger battery tray is included for optional larger batteries (requires moving the ESC backwards).

Figure 3: Top view of the truck's internal components, including the battery tray.

3.4 Powering On and Binding

Refer to the quick start guide included in your box for specific power-on and binding procedures for the transmitter and receiver. Ensure all connections are secure before operation.

4. Operating Your RC Truck

The Losi Mini-T 2.0 is designed for performance. Operate with caution and common sense, especially when learning the controls.

4.1 Basic Controls

• Steering: Use the steering wheel on the transmitter to control the direction of the front wheels.
• Throttle: Use the trigger on the transmitter to control forward/reverse movement and speed.

4.2 Adjustments and Performance Tuning

The truck features oil-filled, fully adjustable shocks with adjustable collars for preload. You can also change the weight of the shock oil for different damping characteristics. Further adjustments can be made using the different mounting holes in the lower arms and top shock towers. Turnbuckle adjustable top arms allow for camber adjustment, and adjustable steering links help fine-tune toe-in or toe-out.

Figure 4: Detailed view of the rear suspension, highlighting adjustable components.

The chassis is constructed with a 2.5mm aircraft-quality aluminum plate and features robust nylon lower wishbones/arms for impact resistance. A carbon steel drive shaft runs from front to back, connecting to oil-filled differentials in the front, rear, and center. The central differential allows for varying power distribution to the front and rear wheels, enhancing performance on different terrains.

Figure 5: Underside of the chassis, showing the aluminum plate and durable suspension components.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your RC truck.

5.1 General Cleaning

• After each use, clean dirt and debris from the chassis, suspension components, and wheels.
• Use a soft brush or compressed air for hard-to-reach areas.
• Avoid using harsh chemicals that may damage plastic or electronic components.

5.2 Component Inspection

• Regularly check all screws and fasteners for tightness.
• Inspect suspension arms, shock absorbers, and drive shafts for any signs of damage or wear.
• Ensure the wheels and tires are in good condition. Standard 12mm hex drives allow for various aftermarket wheel options.

Figure 6: Front wheel and tire detail, showing the tread pattern.

5.3 Differential Maintenance

The oil-filled differentials (front, rear, and center) may require periodic oil changes or refilling to maintain performance. Refer to the detailed manual for specific instructions on accessing and servicing the differentials.

6. Troubleshooting

If you encounter issues with your Losi Mini-T 2.0, consider the following basic troubleshooting steps:

• No Power: Check battery charge, ensure all connections are secure, and verify transmitter batteries are installed correctly.
• Loss of Control: Re-bind the transmitter and receiver. Check for any interference in your operating environment.
• Poor Performance: Inspect for damaged components (shocks, suspension arms, drive shafts). Ensure differentials are properly maintained.

For more detailed troubleshooting or persistent issues, please refer to the comprehensive manual or contact Losi customer support.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please visit the official Losi website or contact Horizon Hobby, LLC customer service. Keep your proof of purchase for any warranty claims.

Online resources and FAQs can often provide quick solutions to common questions.