WOOX R7051

Download PDF
Contents

WOOX R7051 Smart Indoor Siren User Manual

Model: R7051

1. Introduction

The WOOX R7051 Smart Indoor Siren is a security device designed to enhance the safety of your home or office. This device integrates with smart home systems, allowing for remote control and customizable alerts. It features an audible siren and visual flashing light to deter intruders and notify occupants of potential security breaches. This manual provides detailed instructions for the proper installation, operation, and maintenance of your R7051 Smart Indoor Siren.

2. Safety Information

  • Read all instructions carefully before using the device.
  • Do not expose the device to water or moisture. It is designed for indoor use only.
  • Keep the device away from direct sunlight, heat sources, and open flames.
  • Ensure the power source meets the device's specifications (5 Volts).
  • Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
  • Keep out of reach of children and pets.

3. Package Contents

  • WOOX R7051 Smart Indoor Siren
  • Instruction Manual
  • Mounting Accessories (e.g., double-sided adhesive, screws)
  • USB Charging Cable (Micro USB)

4. Product Overview

The WOOX R7051 Smart Indoor Siren is a compact, circular device with a minimalist design. It features a speaker for the siren sound and an integrated light strip for visual alerts. The device is powered by a CR2 battery and can also be powered via a Micro USB cable.

WOOX R7051 Smart Indoor Siren front view

Figure 1: Front view of the WOOX R7051 Smart Indoor Siren, showing its compact, circular design and central light/speaker area.

5. Setup

5.1 Powering the Device

  1. The siren requires one CR2 battery (not included). Open the battery compartment, insert the CR2 battery, ensuring correct polarity.
  2. Alternatively, connect the provided Micro USB cable to the siren's power port and plug the other end into a 5V USB power adapter (not included).

5.2 Mounting the Siren

The siren can be mounted on a wall using the provided double-sided adhesive or screws. For permanent installation, using screws is recommended.

  1. Choose a suitable location for the siren, ensuring it is within range of your Zigbee hub.
  2. If using adhesive, clean the wall surface thoroughly, then peel off the protective film from the adhesive and firmly press the siren onto the wall.
  3. If using screws, detach the removable mounting plate from the siren. Mark the positions for the screws on the wall, drill pilot holes if necessary, and secure the plate with screws. Then, attach the siren to the mounted plate.

5.3 Connecting to the App

The WOOX R7051 operates via a smart home app and requires a compatible Zigbee hub for connectivity.

  1. Download the WOOX Home app (or your preferred compatible smart home app) from your device's app store.
  2. Ensure your Zigbee hub is powered on and connected to your home network.
  3. Open the app and follow the instructions to add a new device. Select the WOOX R7051 Smart Indoor Siren from the list of available devices.
  4. The app will guide you through the pairing process. This typically involves putting the siren into pairing mode (refer to the app or siren's quick start guide for specific button presses, if any).
  5. Once successfully paired, you can control the siren and customize its settings through the app.
WOOX R7051 Smart Indoor Siren controlled by smartphone app

Figure 2: The WOOX R7051 Smart Indoor Siren mounted on a wall, with a smartphone displaying its control interface within a smart home application.

6. Operating the Siren

The WOOX R7051 Smart Indoor Siren is primarily operated through its connected smart home application.

  • Activating the Siren: Within the app, you can manually trigger the siren or set up automated rules based on other smart sensors (e.g., motion sensor, door/window contact sensor).
  • Customizing Settings: The app allows you to adjust various parameters, including:
    • Siren volume (up to 85 Decibels)
    • Siren sound type/tone
    • Duration of the siren sound
    • Activation of the flashing light feature
  • Disarming: The siren can be disarmed or turned off via the app.

7. Maintenance

7.1 Battery Replacement

The siren uses one CR2 battery. When the battery level is low, the app may notify you. To replace the battery:

  1. Carefully remove the siren from its mounting location.
  2. Open the battery compartment.
  3. Remove the old CR2 battery and dispose of it according to local regulations.
  4. Insert a new CR2 battery, ensuring correct polarity.
  5. Close the battery compartment and re-mount the siren.

7.2 Cleaning

To clean the siren, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the device.

8. Troubleshooting

  • Siren not connecting to app: Ensure your Zigbee hub is online and within range. Check the siren's battery level or ensure it's connected to USB power. Try re-pairing the device through the app.
  • Siren not sounding/flashing: Verify that the siren is powered on and connected to the app. Check the app settings to ensure the volume is not muted and the siren/light features are enabled for the specific trigger.
  • Low volume: Adjust the volume settings within the smart home app. The maximum noise level is 85 Decibels.
  • Unexpected activation: Review your automation rules and connected sensors in the app to identify any misconfigurations or false triggers.
  • Device unresponsive: Try removing the battery or disconnecting USB power for 10 seconds, then reconnecting to perform a soft reset. If issues persist, consult the app's help section or WOOX support.

9. Specifications

Model NumberR7051
BrandWOOX
Power SourceBattery Powered (CR2) / USB 5V
Battery Type1 x CR2 Lithium battery required
Control MethodApp (via Zigbee hub)
Noise Level85 Decibels
Mounting TypeWall Mount
Product Dimensions16 x 10 x 5 cm
Item Weight160 g
Compatible DevicesSmartphone (via app)

10. Warranty

WOOX products are covered by a limited warranty from the date of purchase. Please refer to the official WOOX website or your purchase documentation for specific warranty terms and conditions applicable to your region.

11. Support

For technical support, troubleshooting assistance, or further information regarding your WOOX R7051 Smart Indoor Siren, please visit the official WOOX support website or contact their customer service department. Contact details can typically be found on the WOOX website or within the WOOX Home application.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.