H HOSMART 1/2 Mile Wireless Driveway Alarm System Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your H HOSMART 1/2 Mile Wireless Driveway Alarm System. Please read this manual thoroughly before using the product to ensure proper functionality and safety. Keep this manual for future reference.

2. Product Components

The H HOSMART 1/2 Mile Wireless Driveway Alarm System includes the following components:

• 1 x Base Receiver
• 3 x Brown Motion Sensors
• Power Adapter for Receiver
• Mounting Hardware (screws, anchors)

Image: H HOSMART Wireless Driveway Alarm System components, including one receiver and three motion sensors.

Receiver Overview

Image: Detailed view of the H HOSMART receiver, highlighting its power button, channel indicators, volume controls, and USB DC 5V port.

Sensor Overview

Image: Diagram showing the battery compartment of the H HOSMART sensor, indicating the use of 4 AA batteries.

3. Setup

3.1 Sensor Installation

The sensors are designed for outdoor use and are weatherproof. They can be mounted on a tree, post, or wall.

1. Identify a suitable location for each sensor, ensuring a clear line of sight for the desired detection area.
2. Use the provided mounting plate and hardware to securely attach the sensor to the chosen surface.
3. Adjust the swivel mount to refine the focus and detection angle of the sensor.

Image: Easy installation of the H HOSMART driveway alarm sensor on a post.

Video: Sensor Assembly and Connection

3.2 Pairing Sensors with the Receiver

Follow these steps to pair your sensors with the receiver:

1. Clear Existing Pairing (Optional): If you are reassigning channels or encountering issues, first clear the receiver's memory. Press and hold the Power button on the receiver, then plug in the power cable. Continue holding until all four channel lights flash red in sequence, indicating successful clearing. If you do not wish to reassign channels, you can skip this step.
2. Enter Pairing Mode: With the receiver powered on, press and hold the Power button until all four channel lights flash red again. This indicates the receiver is ready to pair.
3. Activate Sensor: Install 4 AA 1.5V batteries (not included) into the sensor. The sensor will automatically attempt to pair.
4. Confirm Pairing: The receiver will produce a unique tone based on the assigned channel, confirming successful pairing.

Video: How to Pair Old and New Sensors

Video: How to Pair a New Sensor with an Existing System

4. Operating Instructions

4.1 Detection Range and Sensitivity

The sensors detect movement from humans, cars, and large animals. The detection range can be adjusted:

• High Sensitivity: Approximately 30 feet (9 meters)
• Low Sensitivity: Approximately 15 feet (4.5 meters)

Adjust the sensitivity using the switch located in the sensor's battery compartment to minimize false alarms.

Image: Diagram illustrating the wireless transmission distance and detection range of the driveway alarm system.

4.2 Chime Selection

The receiver offers a choice of 38 unique ringtones. You can match different chimes with different sensors to differentiate where motion is being detected on your property.

4.3 Expandable System

The system is expandable, supporting up to 4 sensors and an unlimited number of receivers for comprehensive coverage of your perimeter.

Image: Diagram showing the expandable nature of the H HOSMART system, allowing multiple sensors and receivers for property coverage.

4.4 Applications

The H HOSMART Driveway Alarm System can be used in various settings to detect movement, including:

• Driveways
• Backyards
• Mailboxes
• Entrances

Image: Various applications of the motion sensor, including detecting people, animals, intruders, and vehicles.

5. Maintenance

5.1 Battery Replacement

Each sensor requires 4 AA 1.5V batteries (not included). The sensor's power can last for approximately one year under normal usage. Replace batteries when the low battery indicator on the receiver illuminates for the corresponding channel.

Image: Diagram showing the battery compartment of the H HOSMART sensor, indicating the use of 4 AA batteries.

5.2 Weather Resistance

The outdoor sensors are constructed with industrial-grade PVC housing, a rubberized weather/water-resistant seal, and a sunshade, ensuring durability in various weather conditions including thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow.

Image: H HOSMART motion sensor in rainy conditions, highlighting its weatherproof design.

6. Troubleshooting

• False Alarms: Adjust the sensitivity of the sensor (Hi = 30ft, Low = 15ft) using the switch in the battery compartment. Ensure the sensor is not pointing at moving objects like tree branches or reflective surfaces.
• No Detection: Verify that the sensor batteries are correctly installed and charged. Ensure the sensor is properly aimed and not obstructed. Check the receiver's power connection. Re-pair the sensor if necessary.
• Low Battery Indication: If a channel light on the receiver flashes, it indicates a low battery in the corresponding sensor. Replace the batteries promptly.
• Poor Range: While the system boasts a 1/2 mile range in ideal conditions, environmental factors like thick walls, dense foliage, or electronic interference can reduce effective range. Try repositioning the receiver or sensors for optimal signal.

7. Specifications

8. Warranty and Support

The H HOSMART Driveway Alarm System comes with a 2-year warranty on parts and workmanship. Additionally, a 90-day risk-free offer is provided. For technical support or warranty claims, please refer to the contact information provided with your purchase or visit the official H HOSMART website.