GDSTIME 2*GDA1225H05N15U50+2 in 1

GDSTIME Quiet Dual 120mm USB Fan Instruction Manual

Introduction

This manual provides instructions for the GDSTIME Quiet Dual 120mm USB Fan. This product is designed to enhance airflow and cooling for various electronic devices and components, such as AV receivers, DVRs, gaming consoles (PlayStation, Xbox), routers, computers, and cabinet enclosures. The dual fan system is powered via a USB connection and features a speed control for adjustable performance.

Package Contents

Verify that all items listed below are included in your package:

Contents of the GDSTIME Dual 120mm USB Fan package, showing two fans, four metal grills, a USB cable with speed controller, and mounting hardware.

Image: All components included in the GDSTIME Dual 120mm USB Fan package.

Product Features

Close-up of a fan blade and internal copper motor, highlighting the PBT frame and pure copper motor.

Image: Illustration of the fan's PBT frame, blades, and pure copper motor.

Two GDSTIME fans with metal grills placed on top of an AV receiver, with a hand pointing to the grill.

Image: The metal grills on the fans, designed for protection.

Setup Instructions

  1. Unpack Components: Carefully remove all items from the packaging and ensure all listed package contents are present.
  2. Attach Metal Grills: Secure the four metal finger grills to the fans using the provided screws and nuts. Ensure they are firmly attached to prevent vibration.
  3. Position Fans: Place the fans in the desired location to optimize airflow for your electronic device. The fans can be laid flat or stood upright. Consider the direction of airflow needed (intake or exhaust).
  4. Connect USB Cable: Plug the 2-in-1 USB cable into the fans. Then, connect the USB plug to a compatible 5V USB power source. This can be a USB port on your device (e.g., gaming console, router), a USB wall adapter, or a power bank.
Diagram showing various ways to power the USB fan: via a USB wall charger, a power bank, a laptop USB port, or a router USB port.

Image: Examples of USB power sources for the fan.

Six examples of the GDSTIME dual 120mm USB fan in use: cooling an AV receiver, a router/modem, an Xbox Series console, a laptop, a microgreens rack, and an external hard drive enclosure.

Image: Various application scenarios for the dual USB fan.

Operating Instructions

The GDSTIME Dual 120mm USB Fan features an inline speed controller to adjust fan performance. Locate the controller on the USB cable.

Close-up of the 3-speed controller with labels for High, Medium, Low, and Off settings, connected to the dual USB fans and a laptop.

Image: The 3-speed controller for adjusting fan performance.

Maintenance

Regular maintenance ensures optimal performance and longevity of your fans.

Troubleshooting

ProblemPossible CauseSolution
Fans do not spinNo power, loose connection, speed controller set to 'Off'Ensure USB cable is securely connected to both fans and power source. Check if the speed controller is set to 'L', 'M', or 'H'. Try a different USB port or power source.
Fans are too noisyFan speed set too high, dust accumulation, fan obstructionReduce fan speed using the controller. Clean fan blades and grills. Ensure no objects are obstructing the fan blades.
Insufficient coolingFan speed too low, improper placement, blocked airflowIncrease fan speed. Adjust fan position to optimize airflow. Ensure intake and exhaust paths are clear.

Technical Specifications

SpecificationValue
Product Dimensions (per fan)4.72"L x 4.72"W x 0.98"H (120x120x25mm)
VoltageDC 5V
Current0.2 Amp
Wattage1 Watt
Maximum Rotational Speed1500 RPM
Total Airflow2x 65 CFM
Noise Level26 dBA
BearingsHydraulic
Lifespan40,000 Hours
MaterialMetal (grills), PBT (frame/blades)
Item Weight4.3 ounces
Diagram showing the dimensions of the 120mm fan and the lengths of the fan cables and controller cord.

Image: Detailed dimensions and key specifications of the fan system.

Warranty and Support

GDSTIME products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact the retailer where the product was purchased. Keep your purchase receipt for warranty claims.

Related Documents - 2*GDA1225H05N15U50+2 in 1

Preview Gdstime Cooling Fan Product Manual - Safety and Usage Guide
Comprehensive product manual for the Gdstime Cooling Fan. Details include manufacturer information, compliance standards (CE, FCC, RoHS, WEEE), critical safety warnings, and step-by-step instructions for installation and operation.
Preview be quiet! Pure Loop 2 CPU Cooler Installation Guide
Detailed installation guide for the be quiet! Pure Loop 2 All-in-One liquid CPU cooler, featuring quiet operation and superior cooling. Covers setup for various sizes (120mm, 240mm, 280mm, 360mm) and includes warranty information.
Preview BrosTrend E1/AC7 Quick Installation Guide: Dual Band Wi-Fi Extender & Ethernet to Wi-Fi Adapter
Get started quickly with the BrosTrend E1/AC7 Dual Band Wi-Fi Extender and Ethernet to Wi-Fi Adapter. This guide helps you set up your device to extend Wi-Fi coverage or enable wired devices to connect wirelessly.
Preview SteelSeries Arctis Nova 1 Product Information Guide
Discover the SteelSeries Arctis Nova 1 headset with this comprehensive product information guide. Learn about setup, features, compatibility, and regulatory information for your gaming audio experience.
Preview SEGA Wireless Receiver Bluetooth Firmware Update Guide
Firmware installation guide for the SEGA Wireless Receiver featuring Bluetooth Technology. Update instructions for Windows 7/10 to add DPad functionality to Nintendo Switch Pro, Xbox One, and PS4 controllers.