Artemide La Petite Floor Lamp Model 1753028A User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your Artemide La Petite Floor Lamp, Model 1753028A. The La Petite lamp features an archetypal lampshade balanced on a tilted stem, showcasing a geometric design with advanced materials. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

2. Safety Instructions

• Ensure the power supply is disconnected before assembly, cleaning, or bulb replacement.
• This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• Use only LED-T (Non Integrated) E26/A19 bulbs with a maximum power of 12W. Using incorrect bulb types or wattages may damage the lamp or pose a fire hazard.
• Do not modify the lamp or its components. Any modifications will void the warranty and may compromise safety.
• Keep the lamp away from flammable materials.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

3. Package Contents

Verify that all components are present and undamaged before proceeding with assembly.

• Lamp Base
• Lamp Stem (tilted)
• Lampshade (technopolymer)
• Diffuser (polycarbonate)
• Power Cord with On/Off Switch
• Assembly Hardware (if applicable)

Figure 1: Artemide La Petite Floor Lamp (representative model)

4. Setup and Assembly

Follow these steps to assemble your La Petite Floor Lamp:

1. Carefully unpack all components from the packaging.
2. Attach the lamp stem to the lamp base. Ensure it is securely fastened according to the provided hardware (if any).
3. Mount the lampshade onto the top of the stem. The lampshade is made of lightweight technopolymer and should fit snugly.
4. Insert the polycarbonate diffuser into the lampshade.
5. Screw in an E26/A19 LED-T bulb (max 12W) into the lamp holder. Do not overtighten.
6. Position the lamp on a stable, level surface.
7. Plug the power cord into a standard 120V electrical outlet.

5. Operating Instructions

The Artemide La Petite Floor Lamp is equipped with an on/off switch located on the power cord.

• To turn the lamp ON, locate the switch on the power cord and toggle it to the 'ON' position.
• To turn the lamp OFF, toggle the switch to the 'OFF' position.

6. Maintenance

Cleaning

• Always disconnect the lamp from the power supply before cleaning.
• Wipe the lamp base, stem, and shade with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.

Bulb Replacement

• Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb from the E26 socket.
• Screw in a new E26/A19 LED-T bulb (max 12W).
• Dispose of old bulbs according to local regulations.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Artemide products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Artemide website. For technical support, replacement parts, or service inquiries, please contact Artemide customer service through their official channels.

Website: www.artemide.com