Artemide Calipso LED Suspension Lamp User Manual

1. Introduction

The Artemide Calipso LED Suspension Lamp is a sophisticated lighting fixture designed with a unique honeycomb grill, inspired by an image-based algorithm. This design creates an impure geometry, reflecting the irregular beauty found in nature, built from an organic honeycomb of varying diameters. This manual provides essential information for the safe installation, operation, and maintenance of your Calipso lamp.

Figure 1: The Artemide Calipso LED Suspension Lamp, showcasing its unique honeycomb diffuser and elegant suspension design.

2. Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Professional Installation Recommended: Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
• Power Disconnection: Always disconnect power at the circuit breaker before installing, cleaning, or servicing the fixture.
• Voltage Compatibility: Ensure the supply voltage is compatible with the fixture's requirements (10 Volts as per specifications).
• Handle with Care: The fixture contains delicate components. Handle with care to avoid damage.
• Do Not Modify: Do not attempt to modify the fixture in any way. Any modifications will void the warranty and may pose safety risks.
• Indoor Use Only: This fixture is designed for indoor use in dry locations only.

3. Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer immediately.

• Artemide Calipso LED Suspension Lamp Fixture
• Mounting Hardware (ceiling canopy, screws, wire nuts)
• Installation Instructions

4. Setup and Installation

4.1 Before Installation

• Turn off power at the main circuit breaker.
• Ensure the mounting surface is structurally sound and can support the weight of the fixture.
• Unpack all components and inspect for any damage. Keep packaging materials until installation is complete.

4.2 Installation Steps

It is highly recommended that installation be performed by a certified electrician.

1. Carefully remove the existing fixture (if any) and disconnect its wiring.
2. Attach the mounting bracket to the junction box in the ceiling using the provided screws.
3. Adjust the suspension cables to the desired length. Secure the cables using the cable grips on the canopy.
4. Connect the fixture's wires to the corresponding household wires (live to live, neutral to neutral, ground to ground) using wire nuts. Ensure all connections are secure.
5. Carefully tuck the wires into the junction box and secure the canopy to the mounting bracket.
6. Restore power at the circuit breaker and test the fixture.

Figure 2: Angled view of the Artemide Calipso lamp, showing the suspension wires and the intricate diffuser detail.

5. Operating Instructions

5.1 Powering On/Off

The Artemide Calipso LED Suspension Lamp is controlled via a standard wall switch connected to the fixture's power supply. Flip the switch to turn the lamp on or off.

5.2 Dimming Functionality

This lamp supports Dimmable 2-Wire and Dimmable 0-10V control systems. Ensure your dimmer switch is compatible with one of these types for proper dimming functionality. Consult your electrician if you are unsure about your existing dimming system.

• 2-Wire Dimming: Typically uses a standard leading-edge or trailing-edge dimmer.
• 0-10V Dimming: Requires a dedicated 0-10V dimmer and control wiring.

6. Maintenance

Regular cleaning will help maintain the appearance and performance of your Calipso lamp.

• Cleaning: Before cleaning, ensure the power is disconnected at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LEDs: The integrated LED array is designed for long life and does not require replacement under normal operating conditions.
• Inspection: Periodically inspect the suspension cables and electrical connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.

7. Troubleshooting

If you encounter issues with your Artemide Calipso lamp, refer to the table below for common problems and their solutions.

If the problem persists after attempting these solutions, please contact a qualified electrician or Artemide customer support.

8. Technical Specifications

9. Warranty and Support

Artemide products are manufactured to the highest quality standards. For information regarding the warranty period and terms for your Calipso LED Suspension Lamp, please refer to the warranty card included with your product or visit the official Artemide website.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Artemide customer service:

• Website: www.artemide.com
• Email: Refer to website for contact form or email address.
• Phone: Refer to website for regional contact numbers.

Please have your model number (0213018A) and purchase date ready when contacting support.