Introduction
This manual provides essential information for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Aluminum Wall Lamp with S-Bracket. Please read these instructions carefully before installation and operation, and retain them for future reference.
Safety Information
- Always disconnect power before installation, maintenance, or bulb replacement.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Ensure the mounting surface can support the weight of the fixture.
- Do not exceed the maximum wattage specified for the bulb (100W).
- This product is designed for indoor use only.
- Keep away from water and moisture. This product is not water resistant.
Setup and Installation
The Artemide Tolomeo Mini Wall Lamp comes pre-assembled and requires wall mounting. Mounting hardware is included.
- Prepare the Mounting Location: Choose a suitable wall location, ensuring it is structurally sound and has access to a power source.
- Mount the S-Bracket: Secure the S-Bracket to the wall using the provided mounting hardware. Ensure it is level and firmly attached.
- Connect Electrical Wiring: Follow local electrical codes to connect the lamp's wiring to your household electrical system. If unsure, consult a qualified electrician.
- Attach the Lamp: Secure the lamp fixture to the mounted S-Bracket according to the manufacturer's instructions.
- Install Bulb: Insert an E26 base bulb, not exceeding 100 watts. LED bulbs are recommended.
Image: The Artemide Tolomeo Mini Wall Lamp, fully assembled and mounted on a wall, showcasing its articulated arm and conical shade. This image illustrates the final installed appearance of the lamp.
Image: A side view of the Artemide Tolomeo Mini Wall Lamp installed, highlighting the wall-mounted S-bracket and the power cord extending downwards. This perspective helps visualize the mounting mechanism.
Operating Instructions
The Artemide Tolomeo Mini Wall Lamp features an on/off control located on the lamp head and an adjustable arm for directing light.
- Turning On/Off: Locate the push button or knob control on the lamp head. Press or turn it to switch the lamp on or off.
- Adjusting Light Direction: The lamp features an articulated arm and a rotatable diffuser. Gently grasp the arm or diffuser and reposition it to direct light as desired. The joints and tension control knobs allow for smooth adjustment and stable positioning.
Image: A detailed view of the lamp's articulated arm and the polished die-cast aluminum joints and tension control knobs. This illustrates the mechanism for adjusting the lamp's position.
Image: The Artemide Tolomeo Mini Wall Lamp with its articulated arm fully extended horizontally, showcasing the maximum reach and flexibility of the design.
Maintenance
- Cleaning: Dust the lamp regularly with a soft, dry cloth. For more thorough cleaning, wipe with a damp cloth and mild detergent, then dry immediately. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and cool before attempting to replace the bulb. Unscrew the old E26 bulb and screw in a new one, ensuring it does not exceed 100 watts.
- Joints: The joints are designed for smooth operation. Avoid forcing the arm into positions beyond its natural range of motion.
Troubleshooting
- Lamp Does Not Turn On:
- Check if the lamp is properly plugged into a working power outlet.
- Verify that the light bulb is correctly installed and not burnt out. Replace if necessary.
- Ensure the wall switch (if applicable) is in the 'on' position.
- Check your circuit breaker for tripped circuits.
- Light Flickers:
- Tighten the light bulb to ensure good contact.
- Try a different bulb to rule out a faulty bulb.
- Arm is Stiff/Loose:
- The tension control knobs on the joints can be adjusted to modify the arm's stiffness. Turn clockwise to tighten, counter-clockwise to loosen.
Specifications
| Feature | Detail |
|---|---|
| Brand | Artemide |
| Model Number | TOL1120 |
| Material | Aluminum (Arms, Diffuser), Polished Die-Cast Aluminum (Joints, Knobs) |
| Color | Aluminum |
| Light Source Type | LED (compatible) |
| Bulb Base | E26 |
| Maximum Wattage | 100 watts |
| Voltage | 120 Volts |
| Control Type | On/Off (On Head), Push Button/Knob Control |
| Installation Type | Wall Mount, Tension Mounted (S-Bracket) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 4.64 pounds |
| Included Components | Mounting Hardware |
Warranty and Support
For warranty information or technical support, please contact Artemide directly through their official website or customer service channels. Retain your proof of purchase for any warranty claims.