Artemide TOL0100

Download PDF
Contents

Artemide Tolomeo Classic Floor Lamp User Manual

Model: TOL0100

Introduction

This manual provides detailed instructions for the safe and efficient use of your Artemide Tolomeo Classic 100W E26 Aluminum Floor Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Important Safety Information

  • Always disconnect power before cleaning or replacing the bulb.
  • Do not use outdoors or in wet locations. This lamp is designed for indoor use only.
  • Ensure the lamp is placed on a stable, level surface to prevent tipping.
  • Use only bulbs of the specified type and wattage (E26, max 100W).
  • Do not attempt to modify the lamp's structure or wiring. Refer all servicing to qualified personnel.
  • Keep the lamp away from flammable materials.

Package Contents

Verify that all components are present and undamaged upon opening the package:

  • 1 x Artemide Tolomeo Classic Floor Lamp (includes base, arm structure, and lamp head)

Setup Instructions

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat surface.
  2. Assemble Base and Pole: Securely attach the main pole to the heavy floor support base. Ensure it is tightened firmly to prevent wobbling.
  3. Attach Arm Structure: Connect the articulated arm structure to the top of the main pole. The arm structure features joints and tension control knobs for adjustment.
  4. Install Bulb: Insert an E26 base bulb (max 100W) into the lamp head socket. Do not overtighten.
  5. Position Lamp: Place the assembled lamp in your desired indoor location, ensuring the power cord can reach an electrical outlet without being strained or creating a tripping hazard.
  6. Connect to Power: Plug the lamp's power cord into a standard 120V electrical outlet.
Artemide Tolomeo Classic Floor Lamp fully assembled

Image 1: Fully assembled Artemide Tolomeo Classic Floor Lamp, showcasing its adjustable arm and stable base.

Artemide Tolomeo Classic Floor Lamp from a different angle

Image 2: Artemide Tolomeo Classic Floor Lamp positioned in a room, highlighting its sleek design and functional adjustability.

Operating Instructions

Turning On/Off

The Artemide Tolomeo Classic Floor Lamp features an On/Off control located on the lamp head. To turn the lamp on or off, simply operate the switch on the lamp head.

Adjusting the Lamp

The lamp's arm structure is designed with multiple joints and tension control knobs. These allow for precise positioning of the light. Loosen the knobs slightly to adjust the arm's angle and height, then tighten them to secure the desired position. The lamp head can also be rotated to direct light as needed.

Maintenance

Cleaning

To clean the lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the aluminum and polished surfaces. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid abrasive cleaners or solvents, as these can damage the finish.

Bulb Replacement

Before replacing the bulb, ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old E26 bulb from the socket. Insert a new E26 bulb, ensuring it does not exceed the maximum wattage of 100W. LED bulbs are recommended for energy efficiency and longevity.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.
  • Not plugged in.
  • Loose bulb.
  • Faulty bulb.
  • No power at outlet.
  • Ensure power cord is securely plugged into a working outlet.
  • Tighten the bulb in the socket.
  • Replace the bulb with a new one.
  • Test the outlet with another device or check the circuit breaker.
Lamp flickers.
  • Loose bulb.
  • Incorrect bulb type/wattage.
  • Unstable power supply.
  • Tighten the bulb.
  • Ensure the bulb is E26 base and max 100W.
  • Try plugging into a different outlet.
Arm does not hold position.
  • Tension knobs are loose.
  • Tighten the tension control knobs on the arm joints.

Specifications

BrandArtemide
Model NumberTOL0100
Lamp TypeFloor Lamp
MaterialMetal (Arm structure in extruded aluminum, Joints and tension control knobs in polished die-cast aluminum)
Finish TypePolished
Shade MaterialGlass
Shade ColorSilver
Bulb BaseE26
Max Wattage100W
Voltage120 Volts
Control TypeOn/Off (On Head)
Power SourceCorded Electric
Product Dimensions0.01"D x 0.01"H (Note: These dimensions appear to be placeholder/incorrect in source data, refer to product page for accurate dimensions)
Item Weight0.16 ounces (Note: This weight appears to be placeholder/incorrect in source data, refer to product page for accurate weight)
Indoor/Outdoor UsageIndoor

Warranty and Support

This product is manufactured by Artemide. For specific warranty details, please refer to the documentation provided with your purchase or contact Artemide customer support directly.

Return Policy: This product is typically eligible for returns within 30 days of receipt, subject to the retailer's return policy. Please consult your purchase receipt or the retailer's website for full details.

For technical assistance or inquiries, please contact Artemide customer service.

© 2024 Artemide. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.