1. Introduction
Thank you for choosing the Puluomis Boat Shape Glass Vessel Sink. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new sink, faucet, and pop-up drain. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image 1.1: Puluomis Boat Shape Glass Vessel Sink with Chrome Faucet and Pop-up Drain.
2. Product Components
Your Puluomis vessel sink package includes the following components:
- Boat Shape Tempered Glass Vessel Sink
- Chrome Faucet
- Chrome Pop-up Drain
- Hot and Cold Water Supply Lines
- Mounting Hardware/Screw Packet
Image 2.1: Included components: glass sink, faucet, pop-up drain, and water lines.
3. Specifications
| Feature | Detail |
|---|---|
| Sink Dimensions (D x W x H) | 13.4" x 21" x 6.4" |
| Bowl Thickness | 0.5" |
| Sink Material | Tempered Glass |
| Faucet Material | 304 Stainless Steel Shell, Solid Brass Structure, Ceramic Valve |
| Pop-up Drain Material | Solid Brass Structure |
| Installation Type | Above Countertop |
| Drain Type | Pop-Up (without overflow) |
| Faucet Style | Single Hole |
| Faucet Finish | Chrome |
| Pop-up Drain Finish | Chrome |
Image 3.1: Sink Dimensions.
Image 3.2: Faucet Dimensions.
Image 3.3: Pop-up Drain Dimensions.
4. Setup and Installation
This vessel sink is designed for above-counter installation. Professional installation is recommended. Ensure all local plumbing codes are followed.
4.1 Before You Begin
- Inspect all components for any damage before installation.
- Ensure you have all necessary tools (e.g., wrench, sealant, drill, safety glasses).
- Turn off the main water supply before starting any plumbing work.
4.2 Installation Steps
- Prepare the Countertop: Determine the desired location for the sink and faucet. Drill the necessary holes for the drain and faucet according to the product dimensions and your countertop material. Ensure the holes are smooth and free of debris.
- Install the Faucet: Insert the faucet into its designated hole on the countertop. Secure it from underneath using the provided mounting hardware. Connect the hot and cold water supply lines to the faucet and then to your home's water supply valves. Ensure all connections are tight to prevent leaks.
- Install the Pop-up Drain: Place the pop-up drain assembly into the sink's drain hole. Apply a bead of plumber's putty or silicone sealant around the drain flange on the underside of the sink to create a watertight seal. Secure the drain from underneath the sink with its washer and nut. Connect the drain to your P-trap assembly.
- Position the Sink: Carefully place the glass vessel sink onto the countertop, aligning it with the installed pop-up drain. Apply a thin bead of silicone sealant around the base of the sink where it meets the countertop to secure it and prevent water from seeping underneath.
- Final Connections: Double-check all water supply and drain connections for tightness.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. Run water through the faucet and into the sink, observing the drain connections for any signs of leakage. Tighten any leaking connections as needed.
Image 4.1: Example of installed vessel sink.
5. Operating Instructions
The Puluomis vessel sink system is designed for straightforward operation.
5.1 Faucet Operation
- Water Flow: Lift the single handle to turn on the water flow. The higher you lift, the greater the water volume.
- Temperature Control: Move the handle to the left for hot water and to the right for cold water. Adjust the handle position to achieve the desired water temperature.
- Shut-off: Push the handle down completely to turn off the water flow.
5.2 Pop-up Drain Operation
- Open: Press the top of the pop-up drain down once to open it, allowing water to drain from the sink.
- Close: Press the top of the pop-up drain down again to close it, retaining water in the sink.
6. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your Puluomis vessel sink and components.
- Cleaning the Sink: Clean the glass sink regularly with a soft cloth and mild soap or a non-abrasive glass cleaner. Rinse thoroughly with water and dry with a soft cloth to prevent water spots. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the glass surface.
- Cleaning the Faucet and Drain: Clean chrome surfaces with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner specifically designed for chrome finishes. Avoid cleaners containing ammonia, bleach, or abrasive particles, which can damage the finish.
- Preventing Hard Water Stains: In areas with hard water, wipe down the sink and faucet after each use to minimize mineral buildup.
- Drain Maintenance: Periodically remove the pop-up drain stopper and clean any accumulated hair or debris to maintain proper drainage.
7. Troubleshooting
If you encounter issues with your Puluomis vessel sink, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leaks from Faucet Base | Loose mounting nut or worn O-rings. | Tighten the mounting nut under the countertop. If leaks persist, check and replace O-rings. |
| Water Leaks from Drain Connection | Loose drain nut or improper sealant application. | Ensure the drain nut is tight. Reapply plumber's putty or silicone sealant if necessary. |
| Low Water Pressure | Aerator clogged or water supply valves not fully open. | Remove and clean the faucet aerator. Ensure hot and cold water supply valves are fully open. |
| Slow Drainage | Debris or hair in the pop-up drain or P-trap. | Remove the pop-up drain stopper and clean it. If needed, clean the P-trap. |
| Faucet Splashing Excessively | High water pressure or faucet design. | Reduce water flow by partially closing the supply valves. This can be a characteristic of vessel sinks with certain faucet heights. |
8. Warranty Information
Puluomis offers a Limited Lifetime Warranty on this product, ensuring quality and performance under normal use and service. This warranty covers manufacturing defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Puluomis customer support.
9. Customer Support
If you have any questions, require assistance with installation, or need to report a problem not covered in this manual, please contact Puluomis customer support. Have your model number (USBA20070) and purchase information ready when you call or email.
For further assistance, please visit the official Puluomis website or contact their customer service department directly.